SC209Y_TSB_R1

GROUP
MODEL
Subsequent Repair Action
2020-2021MY
Soul (SK3)
2021MY
Seltos (SP2)
NUMBER
DATE
SC209Y (Rev 1, 04/06/2022)
March 2022
SUBSEQUENT REPAIR ACTION
ENGINE REPLACEMENT INSTRUCTIONS
FOR PISTON RING NOISE DTC P1327 (SC209Y)
 NOTICE
This bulletin has been revised to include additional information. New/revised sections of this
SUBJECT:
bulletin are indicated by a black bar in the margin area.
This bulletin provides information related to the Technical Service Bulletin previously published in (SC209A)
titled “ECM Logic Improvement for Piston Ring Noise Sensing System”. If DTC P1327 is present after the ECM
Logic Improvement is performed per SC209A, follow the instructions in this bulletin to replace the engine long
block. Before conducting the procedure, verify that the vehicle is included in the list of affected VINs.
DTC Description:
P1327 / P132700 - Piston Noise Detection
Model
Engine
Production Date Range
Soul (SK3)
2.0L Nu MPI
November 24, 2018 to October 24, 2020
Seltos (SP2)
(Atkinson)
November 20, 2019 to October 15, 2020
 IMPORTANT
A Vehicle Diagnosis Number (VDN) must be created with or without DTC P1327, after scanning for
DTCs, prior to performing SC209Y. If a VDN is not created, Warranty claim submission issues WILL
occur.
 NOTICE
To assure complete customer satisfaction, always remember to refer to WebDCS Warranty
Coverage (validation) Inquiry Screen (Service → Warranty Coverage → Warranty Coverage Inquiry)
for a list of any additional campaigns that may need to be performed on the vehicle before returning
it to the customer.
A printed copy is for reference only; publication information can be updated at any time.
Always refer to KGIS for the latest information. After logging in kdealer.com, the newest technical
publications are listed in ‘Service Releases’ and has the latest service information that has been released.
Page 2 of 4
ENGINE REPLACEMENT INSTRUCTIONS FOR
SUBJECT:
PISTON RING NOISE DTC P1327 (SC209Y)
Flowchart:
VEHICLE IN
with DTC P1327
ENGINE REPLACEMENT
(Long Block)
Both SC209 and SC209A
have been completed
No Techline PWA
Case is needed.
VEHICLE OUT
 IMPORTANT
Campaigns SC209 (Engine Vibration Inspection/Repair Procedures) and SC209A must be
completed & submitted prior to addressing concerns associated with DTC P1327 under SC209Y.
Replacement Procedure:
1.
Replace the engine long block by referring to
the “Engine mechanical System → Engine and
Transaxle Assembly →Engine and Transaxle
Assembly → Repair procedures” chapter in the
applicable Shop Manual on KGIS.
NOTE:
•
Except ‘Engine Long Block & Service KIT’, all the other parts can be re-used.
•
Parts removed that are included in the ‘Service Kit’ may not be re-use.
•
After engine replacement, top-off the engine oil and replace the oil filter & plug gasket.
AFTER ENGINE REPLACEMENT:
TOP-OFF THE ENGINE OIL AS RECOMMENDED.
Engine crankcase oil specification and fill capacity: 5w20 engine oil 2.0L Nu: ~4.23 US Qts.
Required product: Full synthetic type 5w20 API SM, ILSAC GF4 or higher grade.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: SC209Y (Rev 1) Soul (SK3), Seltos (SP2) March 2022
Page 3 of 4
ENGINE REPLACEMENT INSTRUCTIONS FOR
SUBJECT:
PISTON RING NOISE DTC P1327 (SC209Y)
AFFECTED VEHICLE RANGE:
Model
Production Date Range
Soul (SK3)
November 24, 2018 to October 24, 2020
Seltos (SP2)
November 20, 2019 to October 15, 2020
REQUIRED TOOL:
Refer to KGIS for applicable tools required.
REQUIRED PART:
Part Name
Engine Long Block
Nu 2.0L MPI
Part Number
Figure
Comments
21101 122ZRQQKR*
SK3 (M/T)
21101 123ZRQQKR*
SK3 (CVT)
21101 126ZRQQKR*
SP2 (CVT)
*If the Reman part (QQKR) is not available, you may be allocated a part ending in QQK. If allocated a QQK
part, this may be used in the repair and for the related warranty claim submission.
Part Name
Part Number
Figure
Comments
Includes PNs below:
23124 2E003
(ALT 23124 2E052)
23127 2E000
26611 2E022
28521 2E000
Service Kit
21102 N20AKQQK
28313 2EAA0
39250 2E000
11403 08306K
25480 2E000
28491 2E920
28492 2E900
25623 2E000
28751 2B300
13183 12000
94750 37100
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: SC209Y (Rev 1) Soul (SK3), Seltos (SP2) March 2022
Page 4 of 4
ENGINE REPLACEMENT INSTRUCTIONS FOR
SUBJECT:
PISTON RING NOISE DTC P1327 (SC209Y)
WARRANTY INFORMATION:
N Code: N99 C Code: C99
Model
Claim
Causal
Type
P/N
Qty.
Repair
Labor Op
Op
Replacement
Description
Code
Time
P/N
Qty.
21101
SK3
123ZRQQKR*
210163R1
(CVT)
and
7.0
M/H
SK3
R
23040
2E850
0
21102 N20AKQQK
21101
122ZRQQKR*
210163R2
(MT)
1
and
1
21102 N20AKQQK
(SC209Y)
Engine Replacement
SP2
(FWD)
210163R3
6.3
M/H
21101
126ZRQQKR*
and
SP2
(AWD)
210163R4
6.6
1
21102 N20AKQQK
M/H
Note: A Vehicle Diagnosis Number (VDN) must be created with or without DTC P1327, after scanning for
DTCs, prior to performing SC209Y. If a VDN is not created, Warranty claim submission issues WILL occur.
*NOTE: You may receive an engine with a part number ending in “QQK” when a part number ending
in “QQKR” was ordered. Both part numbers are interchangeable and acceptable in the warranty claim.
Refer to Warranty Bulletin 2022-06 for claim submission procedures.
 IMPORTANT
Campaigns SC209 (PNSS Test & Repair Procedures) and SC209A must be completed & submitted
prior to addressing concerns associated with DTC P1327 under SC209Y.
 NOTICE
VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference
SC209Y when accessing the WebDCS system.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: SC209Y (Rev 1) Soul (SK3), Seltos (SP2) March 2022