SC222_OWNR

Kia America, Inc.
Corporate Headquarters
111 Peters Canyon Road, Irvine, CA 92606-1790 USA
Voluntary Emissions Service Campaign
April 6, 2022
Dear Kia Sportage Owner:
Kia America, Inc. is conducting a Voluntary Emissions Service Campaign to replace the Vehicle Emission Control Information
(VECI) Label on 2020 MY Kia Sportage vehicles equipped with the 2.0L Turbo engine.
Why is Kia conducting this Voluntary Emissions Service Campaign?
•
Kia has become aware that an incorrect VECI label was installed on 2020 MY Sportage vehicles with the 2.0L Turbo
engine. The VECI label is extremely important when performing maintenance, emissions inspection, or ordering
engine and engine management related parts. It also contains the code that tells a testing facility which test to
perform to ensure the vehicle is tested to the correct standard. The U.S. Environmental Protection Agency and
California Air Resources Board consider the under hood VECI label an integral part of state emission testing. If the
VECI label is incorrect, your vehicle may fail the emission testing, even if it meets applicable emissions standards.
What Will Kia Do?
•
Kia has included a replacement VECI label with this letter along with instructions for the installation of the
replacement label.
What Should You Do?
•
We ask that you cover the VECI label under the hood of your vehicle with the label included in this letter.
Instructions for installation are attached to this notice.
•
Having this service update performed will help ensure your vehicle’s full protection under the emissions warranty.
•
Failure to have this service performed could cause your vehicle to fail an emission inspection (SMOG check) when
required under State law. It could also be considered a lack of proper maintenance.
•
If you prefer not to install the label yourself, you can contact an authorized Kia dealership to schedule a service
appointment. The actual time to replace the label is approximately 10 minutes, however, the time required to service
your vehicle can vary, depending on the dealer’s work schedule, therefore we recommend scheduling a service
appointment to minimize your inconvenience. Please bring this notice and the replacement label with you to the
service appointment.
•
To find your nearest dealer, visit www.kia.com and click the “Find Dealer” button in the upper right corner (“Dealers”
on a mobile device). You can also use the QR code below with your mobile device to access this information (see the
bottom of this letter for more information about QR code use):
SC222
Have You Changed Your Address Or Sold Your Kia?
If you have changed your home address, sold your Kia vehicle, or no longer own your vehicle, please complete the
•
attached prepaid “Change of Address/Ownership” card and mail it to us.
Are You a Vehicle Lessor?
•
If you are the lessor and registered owner of the vehicle identified in this action, please forward this letter via first
class mail to the lessee within ten (10) days of receipt.
Do You Have Other Questions?
•
Should you have any questions regarding this Emissions Service Campaign or your dealer does not respond to your
service request in a timely manner, we suggest that you contact Kia’s Consumer Assistance Center at 1-800-3334542 (Monday through Friday, 5AM to 6PM, Pacific Time), or through the owner’s section of www.kia.com.
Please accept our apologies for any inconvenience this matter may cause you.
Sincerely,
Consumer Affairs Department
QR Code Use:
•
A QR Code is a square, 2-dimensional barcode that can be read by mobile devices loaded with an appropriate barcode or QR Code Reader App. The app reads the barcode
image and then launches/uploads the specific information the code contains, such as URLs, text, photos, videos.
•
With a mobile device, download a QR Code Reader App. With many devices, you can do this through an app store or marketplace.
•
Open the QR Code Reader App on your mobile device. The app will utilize your device’s camera. Center the code in the camera viewing area. With some apps, the URL
or other information will automatically load when the code is recognized. For others, you may have to snap or take a picture of the QR code. Refer to the QR Reader Code
App instructions.
SC222