A4822272065871_2

Service Bulletin Details

Public Details for: A4822272065871_2

The steering warning lamp may light up in the instrument cluster with a steering fault due to a software issue. This bulletin describes the steps to perform the update.


- 2023 - 2022 - 2021 - 2020 - 2019 -

Technical Service Bulletin
48 Active steering malfunction - DTC B200FF0 (symptom code 12288)
48 22 27 2065871/2 April 28, 2022. Supersedes Technical Service Bulletin Group 48 number 22-18 dated
February 7, 2022 for reasons listed below.
© 2021 Audi of America, Inc.
Page 1 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
All
Not applicable
A4 allroad,
A4, S4, A5
Cabriolet,
A5, A5
Sportback,
S5 Cabriolet 2019 – 2023
S5, S5
Sportback,
A6, A7, A8,
Q5, and
SQ5
2019
RS 5, and RS
5 Sportback 2021 – 2023
A6 allroad,
S6, S7, and 2020 – 2023
S8
A8 e
quattro
2020 – 2021
RS 6 Avant 2021 – 2023
RS 7, Q5 e
quattro, Q5
Sportback, 2022 – 2023
and SQ5
Sportback
A7 e
quattro
2022
Condition
REVISION HISTORY
© 2021 Audi of America, Inc.
Page 2 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
Revision
Date
Purpose
2
-
Revised header (Added Model Year)
1
02/07/2022
Initial publication
Customer states:
• The steering warning lamp lights up in the instrument cluster with the following message:
“Steering: fault. Adapt driving style. Turning circle larger”
Workshop findings:
• DTC B200FF0 with symptom code 12288 is logged in the active steering control unit (diagnostic address 001B).
Technical Background
Software issue.
Production Solution
Not applicable.
Service
Proceed according to the instructions below.
1. Delete the DTC in the active steering control unit (diagnostic address 001B).
2. Perform a short road test which includes a parking maneuver.
3. If the DTC does not return to the 001B control unit, return the vehicle to the customer.
4. If DTC returns, proceed with GFF and follow instructions described in the tester.
Warranty
Claim Type:
© 2021 Audi of America, Inc.
• 110 up to 48 Months/50,000 Miles
Page 3 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
• G10 for CPO Covered vehicles – Verify Owner
• If the vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
4869
Damage Code:
0040
Diagnostic Time:
GFF
0150 0000
Time stated on
the diagnostic
protocol (Max 50
TU)
Claim Comment:
Road test prior to the service procedure
0121 0002
10 TU
Road test after the service Procedure
No allowance
0 TU
As per TSB 2065871/2
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All part and service references provided in this TSB (2065871) are subject to change and/or removal. Always check
with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair
Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2022 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time
without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
© 2021 Audi of America, Inc.
Page 4 of 4
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.