SB10K001I
Service Bulletin Details
Public Details for: SB10K001I
In response to requests from the field and in an effort to reduce repair costs of aisin a465 6-speed transmission, the following on-vehicle procedures have been approved for service at the dealer level. The following procedures have been a
- 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -
Models from 2019
2019 ISUZU N-SERIES |
Models from 2018
2018 ISUZU N-SERIES |
Models from 2017
2017 ISUZU N-SERIES |
Models from 2016
2016 ISUZU N-SERIES |
Models from 2015
2015 ISUZU N-SERIES |
Models from 2014
2014 ISUZU N-SERIES |
Models from 2013
2013 ISUZU N-SERIES |
Models from 2012
2012 ISUZU N-SERIES |
Models from 2011
2011 ISUZU N-SERIES |
Models from 2010
2010 ISUZU N-SERIES |
Models from 2009
2009 ISUZU N-SERIES |
2009 ISUZU W-SERIES |
Models from 2008
2008 ISUZU N-SERIES |
2008 ISUZU W-SERIES |
Models from 2007
2007 ISUZU N-SERIES |
2007 ISUZU W-SERIES |
BULLETIN NUMBER: SB10-K-001I IMPORTANT SERVICE INFORMATION FOR: SERVICE MANAGER SERVICE ADVISOR WARRANTY PERSONNEL TECHNICIAN PARTS DEPARTMENT WARRANTY PERSONNEL ISSUE DATE: APRIL 2022 GROUP: TRANSMISSION APPROVED 6-SPEED AISIN AUTOMATIC TRANSMISSION ON-VEHICLE INTERNAL REPAIRS – TRANSMISSION CONTROL MODULE (TCM) FREEZE FRAME DATA COLLECTION AFFECTED VEHICLES 2007-2019MY Isuzu N-Series 2007-2010MY GMC/Chevrolet W-Series Equipped with 6-Speed Aisin A/T This bulletin supersedes SB10-K-00H. This bulletin is being revised to update model years. Please discard previous bulletin SB10-K-001H. INFORMATION In response to requests from the field and in an effort to reduce repair costs of the Aisin A465 6-speed transmission, the following On-Vehicle procedures have been approved for service at the dealer level. The following procedures have been approved for repair. Refer to the Automatic Transmission sub-section Internal Harness (Wire to Solenoid) section in the appropriate Service Manual for diagnostic and service procedures. NOTE: It may also be necessary to reprogram the TCM. Please refer to Service Bulletin SB12-K-003A to review the corresponding DTCs that may have set in the TCM. Approved On-Vehicle Procedure Quantity J119 (10-pin) Wire to Solenoid Assembly, Replace 1 J120 (12-pin) Wire to Solenoid Assembly, Replace 1 A/T Neutral Switch 1 Shift Solenoid SS1 ~ 4, Replace 4 Transmission Fluid Pressure Switch, Replace 6 Comments PSW4 & PSW5 not allowable due to valve body disassembly In order to improve the quality of the original equipment manufacturer (OEM) and service replacement parts, Isuzu now requests dealers to capture TCM Freeze Frame Data for all Aisin A465 6-speed transmission component parts replaced under warranty. The primary purpose of the TCM Freeze Frame Data is to obtain faster and more accurate quality information on all Aisin A465 6-speed transmission replaced components. The collected information will be used to improve the reliability of OEM and service replacement transmission components. TCM FREEZE FRAME DATA Follow the below information to properly capture and synchronize TCM Freeze Frame Data. IMPORTANT: IDSS must be connected to the internet in order to complete this process. 1. Confirm your computer is connected to the internet and open IDSS. 2. Select your subject vehicle and navigate to the following location: Scan Tool/DTC/Transmission DTC. Once in this location you will be able to select Freeze Frame/Failure Records. 3. Select Freeze Frame/Failure Records and follow the prompts. a. Input the RO number. IMPORTANT: Be sure to input the correct RO number. This is important for Isuzu engineers to match up captured data with the replaced component. 4. IDSS will confirm when "Freeze frame information has been sent". PARTS INFORMATION The following parts information is provided to assist in any repairs. Parts are to be obtained from AIPDN. Part Number Description 8-98179-069-0 J119 (10-pin) Wire to Solenoid Assembly 8-98179-070-0 J120 (12-pin) Wire to Solenoid Assembly 8-98079-390-0 A/T Neutral Switch 8-98179-071-0 Shift Solenoid SS1 ~ 4 R&R 8-98179-072-0 Transmission Fluid Pressure Switch (Low) #3, #6, #8 8-98179-073-0 Transmission Fluid Pressure Switch (High) #1, #2, #7 8-98179-074-0 Bolt, W/Washer, Transmission 8-98179-075-0 Bolt, Flange WARRANTY INFORMATION The following labor operation information is provided for warranty claim submission. Labor Operation Description Labor Time K6275 A/T Neutral Switch See Published Labor Time K6351 Fluid Pressure Switch, Replace See Published Labor Time K6554 A/T Internal Harness, Replace See Published Labor Time K6630 Shift Solenoid, Replace See Published Labor Time