KC-914

4/29/22, 10:18 AM
Article

Volvo Chassis - D12C, D12D, D11F, D13F, D16D, D16F
Engines - Copper Injector Sleeves, Replacement
Procedure And Information ( Flat Tip Injectors ) US04 To US07 Emissions



Internal Content
NOTE: Copper sleeves are the only option for US04 emissions engines.
The Conical ( Stainless Steel ) Sleeve and Injector upgrade is only an
option for US07 emissions level.
For NBR Washers:
- If the top rim of the injector sleeve has ridges machined into the
surface, the NBR washer should be used.
- If the top rim of the injector sleeve is smooth, the NBR washer should
not be used.
Updated tools were released for the removal and installation of Copper
UI
; Live
Injector Sleeves. Current information can be found in IMPACT under the
Service tab operation 2379 03 02 04 Sleeve Engine Injector
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD13?pyActivity=%40base…
1/2
4/29/22, 10:18 AM
Article
Service tab, operation 2379-03-02-04 Sleeve, Engine Injector,
Replacement (Copper).

Tags
k73434141
Related links and attachments
No links or attachments available
Feedback
Give feedback
to help improve the content of this article
; Live UI
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD13?pyActivity=%40base…
2/2