USP010800

DTC:
Bulletin:
P0108-00
GDC22-172
Date:
Description:
Applies to:
April 01, 2022
See below for fault code description(s)
US ARMY VEHICLES
General Information
These repair instructions are intended to address the following fault(s):
DTC
P0108-00
Description
IDTC_BOOSTPRES_
SCH – Voltage
Above Normal or
Shorted High
Possible Cause
•
•
•
•
Connector
Wiring harness
Intake manifold air
temperature (IMAT) and
pressure sensor
Engine control module
(ECM)
Possible (Observable) Symptoms
•
•
•
Low Power
The charge pressure gauge shows 0 in
the instrument, if the signal wire is shortcircuited to 5 V or to battery voltage
The charge pressure gauge always
displays pressure if there is open circuit
on the ground wire
Required Parts
Part Number
Description
Quantity
N/A
PTT, VOCOMII
1
Repair Instructions
Please reference the following file(s):
•
•
IETM, WP File Name: T00803
IETM, WP Number: 172
Additional Resources
•
For support with a warrantable fault/fault code, please submit an SF368 Product Quality Deficiency Report
(PQDR) in the Product Data Reporting & Evaluation Program (PDERP) at https://www.pdrep.csd.disa.mil/
and CC or forward the PDREP generated .pdf copy of the SF368 to appropriate Mack Defense Warranty
Managers:
Margaret Baranowski
(484)-743-7127
[email protected]
William Beard
(610)-573-4954
[email protected]
© 2022 Mack Trucks, Inc. Information is subject to change without notice.
Page 1/2
DTC:
P0108-00
Bulletin:
Date:
•
GDC22-172
April 01, 2022
For assistance with normal service or technical related questions, please contact our Contractor Logistics
Support (CLS) provider POCs:
Rich Rader
(910) 797-0903
[email protected]
Gil Esplana
(254) 404-5409
[email protected]
© 2022 Mack Trucks, Inc. Information is subject to change without notice.
Page 2/2