B16014

Service Bulletin
16-014
February 23, 2016
03239 Version 1
2017 RDX: TQI of the Navigation System
AFFECTED VEHICLES
Year
2017
Model
RDX
Trim Level
All with Navigation
INTRODUCTION
This bulletin covers the total quality inspection (TQI), including testing, of the navigation system for the 2017 RDX.
It includes these topics:
®
®
1.
Navigation System Controls
7.
Bluetooth HandsFreeLink (HFL)
2.
Voice Control System
8.
AcuraLink Real-Time Traffic Information
3.
Navigation System Setup at the TQI
9.
AcuraLink
4.
Rearview Camera
10.
Pandora and Aha™ Interface
5.
Troubleshooting
11.
Short Message Service (SMS) Text Message/E-Mail
Function
6.
Map Coverage Areas
®
For more information about this system, see these resources:
• Owner’s Guide – Besides the one that comes in the Owner Information Kit, this guide is also online. Select Search
by Vehicle, select the vehicle, then enter keyword GUIDE.
• Navigation Manual – Besides the one that comes on the Owner’s CD, this manual is also online. Select Search by
Vehicle, select the vehicle, then enter keywords NAVI MANUAL.
• Owner’s Manual – Besides the one that comes on the Owner’s CD, this manual is also online. Select Search by
Vehicle, select the vehicle, then enter keywords OWN MANUAL.
• Online University – Log in and select SALES. Under Quick Links, select Course Catalog, then enter keyword
NAVI in the search box.
CLAIM INFORMATION
The reimbursement time for the TQI of the navigation system is included as part of the regular TQI of the vehicle.
CLIENT INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and
training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you should not assume
this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an
authorized Acura automobile dealer.
© 2016 American Honda Motor Co., Inc. – All Rights Reserved
Page 1 of 10
1. NAVIGATION SYSTEM CONTROLS
Use the following buttons to operate the navigation system. For more information about them, see “Getting Started” in
the navigation manual.
2. VOICE CONTROL SYSTEM
The navigation system features a voice control system that lets you work most of the navigation, HVAC, and audio
controls with just your voice. To interact with the system, use the Talk and Hang-up/Back buttons. The microphone is on
the ceiling. This is the primary way to give commands to the system.
Talk button – To give a voice command, press and release this button, wait for the beep, and give the command.
Hang-up/Back button – Press and release this button to return to the previous screen. This button has the same
function as the BACK button next to the interface dial.
Microphone – Picks up your voice commands
NOTE: If the system does not understand your commands, see “Improving Voice Recognition” in the navigation manual.
Page 2 of 10
3. NAVIGATION SYSTEM SETUP AT THE TQI
The navigation system is basically ready to use when the vehicle is delivered to the dealership. The system has
features to reduce the chance of driver distraction. Some touch screen menus are limited or unavailable (grayed out)
while driving to encourage the use of voice commands for the navigation and audio systems.
Since the navigation system interfaces with other vehicle systems, it is important that all of the systems are initialized.
To initialize the navigation system, follow these steps:
1. Do the regular TQI of the vehicle.
2. You may see the factory In Line Diag screen below. If so, complete the in-line diagnosis by doing the following.
If not, go to step 3.
•
•
•
Select Start Diag.
Press all of the buttons on the steering wheel that are shown in the In Line Diag screen. The icons should
turn green.
Make a loud sound (like snapping your fingers or clapping your hands) by the microphone to complete the
mic test.
When you have completed all of the tests, the icons will be green. Select Exit Diag to exit the screen.
•
Set the power mode to OFF, then to ON to make sure the In Line Diag screen does not reappear.
•
Page 3 of 10
3. Start the engine and park the vehicle in an open area away from trees, power lines, and tall buildings. Remove
loose articles, cell phones, and electrical accessories near the GPS antenna. If needed, press the VOL/PWR
button to turn on the audio-navigation unit. When the Enter code screen appears, press and hold the
VOL/PWR button for about 2 seconds. This lets the PCM check that the vehicle’s VIN matches the one saved
in the unit. You will hear a long beep when the unit exits the anti-theft mode. Release the button.
NOTE:
•
If the audio-navigation unit does not exit the anti-theft mode, enter the anti-theft code using the audio touch
screen display.
•
Anti-theft code labels are no longer included in the vehicle.
•
If you need the anti-theft code, you can get it from the Interactive Network (iN) using the navigation system
serial number. You can easily get that number without removing the audio-navigation unit. To get the serial
number and the code do this:
-
Press and hold the MENU, NAV, and BACK buttons at the same time.
-
At the Select Diagnosis Items screen, select Detail Information & Settings, Unit Check, then ECU
Info. The system runs a short diagnostic, then the navigation system serial number appears at the
bottom of the screen.
-
Go to Anti-theft Code Inquiry on the iN and look up the five-digit anti-theft code.
If the code does not work, call the American Honda warranty department at 310-783-3240.
Do not call Tech Line.
Page 4 of 10
4. Once you enter the code, this screen appears, telling you the system is initializing (acquiring its location from
the GPS satellites). Keep watching the screen.
NOTE: Initialization averages about 10 minutes, but it can take as long as 45 minutes. If it completes within
10 minutes, the screen changes to the globe screen.
5. If the system does not initialize within 10 minutes, a second screen (shown below) appears. The system is still
initializing, but it will not automatically change to the globe screen when the initialization is complete. Do not
follow the screen instructions right away. After 30 minutes, try restarting the engine to see if the system
completed the initialization. If it did not, then follow the screen instructions.
NOTE: The initialization screen may appear after battery voltage to the audio-navigation unit has been
disconnected for more than 5 minutes. If this happens, follow the screen instructions. If you are still unable to
get GPS initialization, see the service information for diagnostic information.
6.
When initialization is complete, this screen appears. Select OK.
NOTE: Do not enter a destination yet. For the navigation system to calculate a route, it must align the current
location to a mapped road (map matching). This happens when you start driving.
Page 5 of 10
®
7. Make sure the SiriusXM Radio dealer demo account is active by tuning to several channels within the full
lineup. To see the full list of channels, go to www.siriusxm.com. If you get those channels, the demo account is
fully active.
®
NOTE: SiriusXM Radio is free to clients for the first 90 days. To keep getting coverage after that, they must
subscribe by calling 800-852-9696 or going to www.siriusxm.com. They will need their eight-character radio ID
(shown when tuned to channel 0) and a major credit card.
8. Drive the vehicle at least a half-mile from your dealership and find a safe place to park. Then, set the map scale
to 1/20.
• Make sure the vehicle position (VP) icon moves smoothly as you drive and does not jerk from one point to
another. Also make sure the icon points in the direction the vehicle is traveling; it should not dog track or
spin.
• After driving a few hundred feet, you should see the name of the road you are driving on at the bottom of
the screen. The system is now map-matched.
NOTE: If the system fails to map-match after driving for more than a couple of miles on a displayed road, see
symptom troubleshooting in the service information.
9. With the map screen shown, press and release the Talk button.
10. The Voice Portal screen will appear. After the voice prompt and beep, say “Find the nearest Acura dealer.”
The system should recognize the command as given and a list of Acura dealers should appear.
11. Turn the interface dial to select your dealership in the Select a place screen, then press the ENTER button.
12. On the following screen, select Set as Destination. The system then calculates a route and shows it as a blue
line. If you are in an area with unverified roads, you may see a blue vector line or a blue/pink dotted line pointing
in the direction of your destination.
13. Follow the voice guidance back to your dealership. It should work even with the audio system turned off.
14. With the map screen shown, check the system interaction with the audio system and the On Demand Multi-Use
Display™ (ODMD). Press and release the Talk button. The Voice Portal screen will appear. After the voice
®
prompt and beep, say “XM channel 115.” The ODMD should show SiriusXM channel 115.
15. With the map screen shown, check the system interaction with the climate control system. Turn it on by
selecting AUTO, then press and release the Talk button. The Voice Portal screen will appear. After the voice
prompt and beep, say “Temperature 68 degrees.” The ODMD should show 68 degrees.
Page 6 of 10
16. Make sure the time shown on the navigation screen is correct; the system gets it from the GPS satellites.
For areas that do not follow daylight saving time, you may have to adjust the time settings. Go to Clock
Adjustment in the Setup screen and set Auto Daylight to OFF.
NOTE: If your dealership is near a time zone boundary, set Auto Time Zone by GPS to OFF. The clock then
keeps the home time if the client routinely drives across the time zone boundary.
17. Press the DISPLAY MODE button to make sure the screen changes between the Day, Night, and OFF modes.
18. If the dealer traffic account is activated and if your dealership is near a metropolitan area that has traffic incident
or traffic flow data available (see ACURALINK REAL-TIME TRAFFIC INFORMATION), do this:
• Turn the interface dial to select one of the traffic map scales (1/20-, 1/8-, 1/4-, 1/2-, 1-, 2-, or 5-mile).
• Use the interface dial to scroll to the downtown area of your city. If your metro area has traffic flow data,
freeways and other main roads should show this data as red, yellow, or green lines in one or both
directions.
• You may see small diamond-shaped traffic incident icons. If so, scroll over one and press in the interface
dial to see the details.
• Partially shown traffic data does not mean a problem with the navigation system. Traffic flow and density
varies from day to day and from one road to another. If your area has traffic, but you cannot see it on the
screen, do a search using keyword TRAFFIC.
19. Clear the HDD to delete any information that was saved during the TQI:
• Set the power mode to ACCESSORY.
• Turn on the audio-navigation unit.
• Press and hold the MENU, NAV, and BACK buttons at the same time until the Select Diagnosis Items
screen appears. Then, release the buttons.
• Select Detail Information & Setting, then Functional Setup.
• Select All Clear. A confirmation screen appears. Select Yes.
• A second confirmation screen appears. Select Yes, again.
4. REARVIEW CAMERA
With the power mode set to ON, shift to Reverse. The rearview image appears on the navigation screen. Make sure the
distance guidelines appear on the screen. To turn the guidelines on or off, press and hold the BACK button for
3 seconds. Change the camera views by pushing in on the interface dial. Turn the dial to adjust the image brightness.
This adjustment is not affected by the screen brightness adjustment in Setup.
NOTE:
• When in Reverse, only the interface dial works; the other buttons are locked out.
• If the image is foggy or dirty, clean the camera lens.
Page 7 of 10
5. TROUBLESHOOTING
If you think you found any problems with the navigation system during the TQI or after installing replacement parts to
repair it, go to the service information and enter keywords HOW TO TROUBLESHOOT. From the list, select How to
Troubleshoot the Navigation System.
6. MAP COVERAGE AREAS
The map database covers the United States, Mexico, Puerto Rico, and Canada. The map coverage for the U.S.
contains accurately mapped (verified) metropolitan areas and less accurate (unverified) rural coverage.
For a list of current detailed coverage areas by country and state/province, see the navigation manual or go to
www.acuranavi.com. Online, select the Model and Year, Map Coverage, then Map Coverage Details.
You do not need to change the navigation settings when relocating to or from these locations.
7. BLUETOOTH® HANDSFREELINK® (HFL)
®
HFL works with most Bluetooth -enabled cell phones to let you receive and make phone calls through the audio system
without ever taking your hands off of the steering wheel.
With a compatible phone, a simple one-time pairing process using the navigation screen is all it takes to connect the
phone to the vehicle. When you make or receive a call, the audio system will automatically mute and you will hear the
call through the audio system speakers.
You can pair up to six phones to HFL. You view and work HFL functions through the navigation screen. A phonebook
from a compatible phone(s) can be synched with the audio-navigation unit when the phone is first paired.
For a list of approved phones, go to www.acura.com/handsfreelink.
8. ACURALINK REAL-TIME TRAFFIC INFORMATION
Traffic information is available in many metropolitan areas. The amount and type of coverage varies. Traffic incidents
(diamond-shaped icons) are shown on the screen for most major metropolitan cities (typically during daytime
commutes). Many of these cities also show traffic flow, shown as red, orange, or green bands, alongside major roads or
freeways.
NOTE:
®
• Traffic information will not be shown if the SiriusXM Radio dealer demo service is not active.
• See the service information to troubleshoot traffic Information problems.
The amount of traffic coverage varies from city to city and time of day. The Acura website contains a link that provides
an up-to-date list of the current cities with traffic coverage and the actual roads covered within each city. The link also
provides a demonstration of the system, which explains traffic flow color bands and incident icons shown on the map.
You can find this link at www.acura.com/realtimetraffic.
Page 8 of 10
9. ACURALINK
AcuraLink delivers remote services to the vehicle using an embedded cellular module and the client’s smartphone.
The module provides access to emergency services, remote vehicle functions, enhanced navigation services, remote
vehicle diagnosis, and client relation services.
®
™
The client’s smartphone provides access to Pandora and Aha , and vehicle finder and tracking services through
individual apps.
All of the functions are combined in the vehicle using overhead console buttons along with the navigation screen and
ODMD.
NOTE: Enrollment is required for AcuraLink. On the iN, go to Service, AcuraLink Next Gen, and Enrollment.
AcuraLink System Status Indicator
The AcuraLink System Status indicator shows you the status of AcuraLink. When the system is booted up, the indicator
blinks red and green alternately once.
•
•
•
•
Steady Green: The system is ready to use.
Blinking Green: A call is being connected or in progress.
Steady Red: There is a problem in the system.
Alternately Blinks Red and Green: The self-diagnosis function is in use.
10. PANDORA® AND AHA™ INTERFACE
®
™
Clients can stream Pandora or Aha through the audio system. Clients need to pair their Acura-approved phones to
®
™
HFL. To find an approved phone that supports streaming Pandora or Aha , go to www.acura.com/handsfreelink.
™
The Aha app works best if the client downloads the AcuraLink Streams app available in the Google Play Store or the
Apple App Store.
®
™
NOTE: Not all approved phones support all of the Pandora or Aha features. Make sure you check the phone’s
supported features on the website to avoid replacing good components in the vehicle during troubleshooting.
®
™
For more information about playing Pandora or Aha through your audio system, see “Playing Internet Radio” in
the owner’s manual.
Page 9 of 10
11. SHORT MESSAGE SERVICE (SMS) TEXT MESSAGING/E-MAIL FUNCTION
An integrated SMS text message function lets clients respond to incoming text messages without handling their phone.
Clients who pair specified Acura-approved phones to HFL can get incoming text messages and e-mails, as well as
respond to messages by way of the audio-navigation unit by selecting one of six possible responses.
For more information about text messages, see the owner’s manual. For a list of approved phones, go to
www.acura.com/handsfreelink.
Page 10 of 10