American Motors Concord 1981
Vehicle Details: Recalls, Crash Tests, Investigations
Below you will find all available information on the 1981 AMERICAN MOTORS Concord, manufacturered by American Motors Corp..
The vehicle is described as a AUTOMATIC - REAR WHEEL DRIVE TWO DOOR SEDAN.
Manufacturer | Known WMI(s) | Fuel Type |
---|---|---|
AMERICAN MOTORS | 1AC 1AM 2CC 2CM |
Use the box here to look up VINs from AMERICAN MOTORS as well as other manufacturers
-
Where is the 1981 AMERICAN MOTORS Concord produced?
- The 1981 AMERICAN MOTORS Concord is produced in DETROIT Mi, United States (usa).
-
Are there recalls for the 1981 AMERICAN MOTORS Concord?
- There are 2 recall(s) for the 1981 AMERICAN MOTORS Concord, additional information is below.
-
How much does the 1981 AMERICAN MOTORS Concord weigh?
- The 1981 AMERICAN MOTORS Concord is listed to weigh 1783 lbs.
Recall 85403 [USA]: Excess fuel pump pressure could cause a vehicle fire.
Recall 65597 [USA]: Vehicle description: passenger vehicles equipped with 6 cylinder engines andfactory installed cruise commands.system: fuel; cr
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Engine compartment fires investigation # EA88009
Analysis:many of the reports indicate that the plastic valve cover or the\tv gasketing material loses its structural and/or sealing integrity due tothe high engine temperatures associated with the amc 258 engine.Testingperformed by a local fleet clearly demonstrated that under normal drivingconditions, motor oil leaks in the vicinity of the #3 or #4 cylinders (overthe exhaust manifold) can result in a fire serious enough to destroy avehicle.Amc has issued numerous tsbs regarding the proper/improper method of seal-ing the valve cover-head interface.1981-84 amc 6-cylinder engines areequipped with a plastic valve cover which has 5 guide pins and 2 fasteners.The cover used in later models was re-designed to have 5 attaching points,and this "new" valve cover can be used on older engines by means of amodification kit.As expected, complaints of engine fires in 1985 modelsdropped significantly, indicating that the addition of the new valve covermay have "solved" the problem.Status: ir to the manufacturer sent 12/1/87.Proposed action: open an engineering analysis.===