TB-UPS-0512

SB-10045680-3984
TECHNICAL BULLETIN
UPS0512-4bNAS1
05 APR 2012
THIS TEHCNICAL BULLETIN SUPERSEDES SERVICE ADMINISTRATION BULLETIN 6-179NAS
THIS UPDATE PRIOR TO SALE IS VALID FOR A LIMITED TIME ONLY
AND WILL EXPIRE ON 02 NOVEMBER 2012
SECTION: 417
Update Prior to Sale: Right-Hand Rear Fog Lamp
AFFECTED VEHICLE RANGE:
XK (X150)
VIN:
Model Year:
Specific vehicles; see attached list
2012
CONDITION SUMMARY:
Situation: A limited number of 2012 model year Jaguar XK vehicles may have been manufactured away from
process and in some cases the right-hand (RH) rear fog lamp may be incorrectly welded.
Action: Dealers are required to 'HOLD' the affected vehicles within your control and refrain from releasing the
vehicles for new or used vehicle sale pending completion of the rework action detailed in this Technical
Bulletin. For vehicles in dealer inventory, this UPS should be performed in conjunction with the vehicle PreDelivery Inspection (PDI). For vehicles in dealer inventory which have already had the PDI completed, this
UPS should be completed prior to final preparation / customer handover. For those vehicles already in the
hands of customers, this should be done at the next available opportunity prior to the expiration date.
PARTS:
PART NO.
DESCRIPTION
QTY
% OF VEHICLES REQUIRING PART*
C2P21456
Foam seal
1
100
C2P21458
Rear fog lamp (right-hand)
1
100
TOOLS:
Refer to Workshop Manual for any required special tools
WARRANTY:
NOTE: Repair procedures are under constant review, and therefore times / prices are subject to
change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest
repair time. Check DDW to ensure that the vehicle is affected by this Update Prior to Sale Notice prior
to undertaking any rework action. At the time of confirming a booking for vehicle repair, ensure that
all outstanding Service Actions are identified to ensure the correct parts are available and adequate
workshop time is allocated for repairs to be completed at one visit.
Warranty claims must be submitted quoting Program Code 'K128' together with the relevant Option Code
from the table. SRO and parts information is included for information only. The Option Code(s) that allows for
the drive in / drive out allowance can only be claimed if the vehicle is brought back into the workshop for this
action alone to be undertaken.
This Update Prior to Sale notice is valid for a limited time only. Warranty claims with a repair date prior to the
02 November 2012 closure date must be submitted for payment within 30 calendar days of completion of the
repair.
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and
equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are
not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar service facility to determine
whether this bulletin applies to a specific vehicle.
© Jaguar Land Rover North America, LLC
555 MacArthur Boulevard
Mahwah, NJ 07430
PROGRAM
CODE
OPTION
CODE
DESCRIPTION
SRO
K128
K128
TIME
(HOURS)
PART NUMBER
QTY.
B
Fit foam seal; replace right-hand rear fog lamp Coupe
86.94.41
0.50
C2P21456
C2P21458
1
1
C
Fit foam seal; replace right-hand rear fog lamp Coupe
Drive in / drive out
86.94.41
0.50
10.10.10
0.10
C2P21456
C2P21458
-
1
1
-
K128
B
Fit foam seal; replace right-hand rear fog lamp Convertible
86.94.41
0.30
C2P21456
C2P21458
1
1
0.30
C
Fit foam seal; replace right-hand rear fog lamp Convertible
Drive in / drive out
86.94.41
K128
10.10.10
0.10
C2P21456
C2P21458
-
1
1
-
Normal Warranty policies and procedures apply
REPAIR PROCEDURE
REPLACE RIGHT-HAND REAR FOG LAMP
1. Convertible only: refer to Workshop Manual section 501-05:
Interior Trim and Ornamentation, and remove the luggage
compartment lid trim panel.
2. Coupe only: refer to Workshop Manual, section 501-05:
Interior Trim and Ornamentation, and remove the liftgate
lower trim panel.
3. Remove the right-hand (RH) reverse / fog lamp:
•
Remove the three (3) plastic nuts.
•
Disconnect the electrical connector.
CAUTION: Clean the contact areas on the lamp making
sure all grease and dirt is removed before installing the
foam surround.
4. Fit foam seal surround to new RH reverse / fog lamp:
•
Starting at the top of the new lamp, peel back the
protection and apply foam surround to lamp.
•
Cut off and discard any excess seal.
5. Install the new right-hand (RH) reverse / fog lamp:
•
Connect the electrical connector.
• Install the three (3) plastic nuts.
6. Convertible only: refer to Workshop Manual section 501-05:
Interior Trim and Ornamentation, and install the luggage
compartment lid trim panel.
7. Coupe only: refer to Workshop Manual, section 501-05:
Interior Trim and Ornamentation, and install the liftgate lower
trim panel.
UPS0512-4bNAS1
Affected VIN List
Canada
RETAILER CODE / NAME
VIN
3306 John Scotti Jaguar
B47642
4495 Coventry North Jaguar
B47645
4498 Jaguar Thornhill
B47591
6058 Jaguar of Calgary
B47539
USA
RETAILER CODE / NAME
VIN
0486 Paretti Imports, Inc.
B47647
0518 San Jose British Motors
B47599
0696 Alpine Jaguar
B47644
5386 Jaguar Ventura
B47565
5398 Jaguar Greensboro
B47557
5581 Jaguar Palm Beach
B47636
B47573
5609 Jaguar Boise
B47533
5612 Jaguar Huntsville
B47537
5670 White Plains Jaguar
B47654
5684 Bergen Jaguar
B47632
5691 Jaguar of Sarasota
B47652
5708 THE COLLECTION
B47541
5727 Crest Jaguar of Woodbridge
B47613
B47641
5729 Gaudin Jaguar
B47530
B47611
5744 Jaguar Huntington
B47545
B47552
5755 Jaguar Anaheim Hills
B47605
5763 Jaguar Ft. Myers
B47551