TIBU-7306

Advanced Full Text Search - TIBU7306 - ECM Mount Modification{7000}
SB-10054567-3323
Page 1 of 2
Shutdown SIS
Previous Screen
Welcome: chrismk2
Product: NO EQUIPMENT SELECTED
Model: NO EQUIPMENT SELECTED
Configuration: NO EQUIPMENT SELECTED
Technical Information Bulletin
ECM Mount Modification{7000}
Media Number -TIBU7306-00
Publication Date -30/09/2013
Date Updated -30/09/2013
Caterpillar: Confidential Yellow
i05477852
ECM Mount Modification{7000}
SMCS - 7000
On Highway Truck:
CT660 (S/N: TRK1-UP; TKL1-UP; TJS1-UP; TGT1-UP; TSW1-UP; TSY1-UP)
Introduction
The problem that is identified below has a known permanent solution. Use the solution that is
identified below.
Problem
The engine harness can rub on the harness mounting location of the ECM mount.
Solution
If the ECM mount is removed from the engine for any reason, perform the modification to the wire
harness mount and inspect the harness.
Modification
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
10/2/2013
Advanced Full Text Search - TIBU7306 - ECM Mount Modification{7000}
Illustration 1
Page 2 of 2
g03462056
1. Using a hack-saw or other acceptable method, cut off harness support bracket from bottom of
ECM bracket.
Illustration 2
g03462057
2. Using grinder or other acceptable method, grind off any remaining stock close to profile of
ECM bracket. Remove any burrs or sharp edges.
3. Inspect harness and repair harness if evidence of rubbing through to copper is observed.
Copyright 1993 - 2013 Caterpillar Inc.
Wed Oct 2 17:07:17 CDT 2013
All Rights Reserved.
chrismk2
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
10/2/2013