REHS-9187
Service Bulletin Details
Public Details for: REHS-9187
Caterpillar: procedure information on adding/installing support brackets, to bottom of hood, to prevent cracking. *pe updated 10/21/14. *pe
Models from 2014
2014 CATERPILLAR CT660 |
Models from 2013
2013 CATERPILLAR CT660 |
Models from 2012
2012 CATERPILLAR CT660 |
Models from 1982
1982 CATERPILLAR CATERPILLAR |
SB-10055694-5536 Advanced Full Text Search - REHS9187 - Procedure to Install the Bottom Side Hood Sup... Page 1 of 4 SB-10055694-1383 Previous Screen Welcome: davidaa Product: NO EQUIPMENT SELECTED Model: NO EQUIPMENT SELECTED Configuration: NO EQUIPMENT SELECTED Special Instruction Procedure to Install the Bottom Side Hood Support Bracket on the CT660{7000} Media Number -REHS9187-02 Publication Date -2014/06/18 Date Updated -2014/06/18 i05833475 Procedure to Install the Bottom Side Hood Support Bracket on the CT660{7000} SMCS - 7000 On Highway Truck: CT660 (S/N: TGA1-UP; TGD1-UP; TEJ1-UP; TRK1-UP; TKL1-UP; TEM1-UP; TEP1UP; TJS1-UP; TGT1-UP; TSW1-UP; TSY1-UP; TGZ1-UP) Introduction The procedure below explains the process to add a support bracket to the bottom side of the hood. This bracket will help prevent hood cracks. Parts Required Table 1 Item QTY New Part Number Part Name Where Used 1 1 453-3613 Support-Hood 122 inch BBC Hood 2 1 453-3614 Support-Hood 116 inch BBC Hood 3 2 Obtain Locally Rivets 4 1 Obtain Locally Adhesive Note: Please use one of the following adhesives to attach the hood bracket. https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/1/2014 Advanced Full Text Search - REHS9187 - Procedure to Install the Bottom Side Hood Sup... Page 2 of 4 • "ITW Plexus" - AO420, MA420, MA1021 (used in production) • "Pilogrip" - 6600, 7525 A/B · • "Hysol" - EA9460 • "Arathane" - 8680, 5541 • "Fusor" - 7525 A/B Work Procedure Illustration 1 g03670555 1. Remove the hood damper. https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/1/2014 Advanced Full Text Search - REHS9187 - Procedure to Install the Bottom Side Hood Sup... Page 3 of 4 Illustration 2 2. Remove the bolts from the hood damper bracket to remove the bracket Illustration 3 g03670561 https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/1/2014 Advanced Full Text Search - REHS9187 - Procedure to Install the Bottom Side Hood Sup... Page 4 of 4 3. Put adhesive bead at shown locations for attaching T-bracket to rest of hood assembly and mount T-bracket (working time of adhesive = 4-6 minutes time when adhesive is applied until T-bracket is placed) with help of C-clamps to hold pressure. Put rivets at shown locations. Wait for at least hour and half for adhesive to cure. Note: Mounting locations for damper bracket should not be covered in adhesive and must be open for attaching bolts. Illustration 4 g03670566 4. Attach the damper mounting bracket and the damper back to hood assembly with bolts Note: Make sure when you reinstall the hood strut that the barrel end is down (mounted on radiator) rod end is up (on hood). Copyright 1993 - 2014 Caterpillar Inc. All Rights Reserved. Tue Jul 1 16:08:32 CDT 2014 davidaa Private Network For SIS Licensees. https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/1/2014