NTB-14-072

Service Bulletin Details

Public Details for: NTB-14-072

Nissan: use corrected specification (sd) for positioning targets when performing the calibration for rear view camera, that monitors traveling lane. Model 2014 rogue.

- 2014 -

Models from 2014

2014 NISSAN ROGUE

SB-10056134-4570
Classification:
Reference:
EL14-034
Date:
NTB14-072
July 30, 2014
2014 ROGUE; TARGET BOARD PLACEMENT FOR
REAR CAMERA CALIBRATION
APPLIED VEHICLES:
2014 Rogue (T32)
SERVICE INFORMATION
When performing Rear View Camera calibration, use the corrected specification (Sd) for
positioning the targets.
NOTE:

The Rear View Camera monitors the traveling lane. It transmits the camera image
signal to around view monitor control unit for the Lane Departure Warning (LDW)
system.

The specification in the Electronic Service Manual (ESM), Section DAS – Driver
Assistance Systems, for positioning the Rear View Camera Targets are incorrect.
Use the corrected specification (Sd) listed below.
Side distance (Sd): “B”–“E” (“D”–“F”): 2194 mm (86.38 in)
Left distance (Ld): “Ct”–“Lt”: 1500 mm (59.06 in)
Right distance (Rd): “Ct”–“Rt”: 1500 mm (59.06 in)
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/1