NTB14-015B
Service Bulletin Details
Public Details for: NTB14-015B
Nissan 2014-2015 rogue(t32): information involving tpms configuration, when a bcm is replaced, tire pressure monitor system configuration must be performed. *lj
Models from 2015
2015 NISSAN ROGUE |
Models from 2014
2014 NISSAN ROGUE |
SB-10058046-8015 Classification: Reference: WT14-002b Date: NTB14-015b April 9, 2015 2014-2015 ROGUE; TPMS CONFIGURATION This bulletin has been amended. The Applied Vehicles section has been revised. Please discard previous versions of this bulletin. APPLIED VEHICLES: 2014-2015 Rogue (T32) NOTE: This bulletin does not apply to Rogue Select (S35) SERVICE INFORMATION When a BCM is replaced for any reason, TPMS (Tire Pressure Monitor System) configuration must be performed. TPMS configuration is in addition to any other BCM configurations that may be performed. If TPMS configuration is not performed, TPMS transmitter ID registration will not complete. Follow the SERVICE PROCEDURE in this bulletin to perform TPMS configuration. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/6 SERVICE PROCEDURE 1. Connect the CONSULT-III plus (C-III plus) Vehicle Interface (plus VI) to the vehicle. 2. Turn the ignition ON. 3. Open / start C-III plus. 4. Wait for the plus VI to be recognized. The serial number will display when the plus VI is recognized. 5. Select Re/programming, Configuration. Step 4: plus VI is recognized Step 5 Figure 1 2/6 NTB14-015b 6. Use arrows (if needed) to view and read all precautions. 7. Check the box confirming the precautions have been read. 8. Select Next. Step 6 Step 7 Step 8 Figure 2 9. Select Nissan, Vehicle Name, correct Model Year, and then Select. If the screen in Figure 3 does not display, skip to step 10. Example Step 9 Figure 3 3/6 NTB14-015b 10. Make sure VIN or Chassis # matches the vehicle’s VIN. 11. Select Confirm. Step 10 Step 11 Figure 4 12. Select Confirm. Step 12 Figure 5 4/6 NTB14-015b 13. Select Air Pressure Monitor. Step 13 Figure 6 14. Select Manual Configuration. Step 14 Figure 7 5/6 NTB14-015b 15. Select the DATA PART NO. that matches your vehicle’s configuration – with 2-row or 3-row seating. Use the scroll arrows to scroll and find the correct DATA PART NO. / BCM part number. 16. Select Next. Example Step 15 Always ignore P/Ns 4CL0A and 4CB0A 40711 40711 4CU0A: With 3-row seating 40711 4BA0A: With 2-row seating 40711 Step 16 Figure 8 Step 15: Scroll arrows 17. Confirm the correct DATA PART NO. is selected. 18. Select OK. TPMS configuration is complete. Step 19 40711 Step 17 Step 18 Figure 9 19. Select Home, and then close and disconnect C-III plus from the vehicle. 6/6 NTB14-015b