TB-286NAS1

Page 1 of 1
TECHNICAL BULLETIN
K286NAS1
20 JUL 2015
SB-10058423-9580
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge,
tools, and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on
some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by
'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an
authorized Jaguar service facility to determine whether this bulletin applies to a specific vehicle.
SECTION: 211-03
Service Action: Incorrect Tie Rod Adjustment Bar Locking Nut Torque
AFFECTED VEHICLE RANGE:
F-TYPE (X152)
Model Year:
2016
VIN:
K22185-K26513
Manufacturing Plant: Castle Bromwich
MARKETS:
NAS
CONDITION SUMMARY:
Situation: An issue has been identified on a limited number of 2016 model year F-TYPE (X152) vehicles
where the steering rack tie rod adjustment bar lock nuts are to the incorrect torque specification.
Action: Retailers are required to HOLD only affected new vehicles that are within your control and refrain
from releasing the vehicles for new vehicle sale pending completion of the Service Instruction detailed in this
Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI)
process but must have it completed prior to vehicle handover to the customer.
Affected vehicles already in the hands of customers should be updated at the next available opportunity.
PARTS:
No parts required.
SPECIAL TOOLS:
Refer to Workshop Manual/Service Instruction for any required tools.
WARRANTY:
NOTE: check DDW to ensure that a vehicle is affected by this program prior to undertaking any
rework action.
At the time of confirming a booking for vehicle repair, ensure that all outstanding Service Actions are identified to
ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one
visit.
Warranty claims must be submitted quoting Program Code 'K286' together with the relevant Option Code from
the table. SRO and parts information is included for information only. The Option Code(s) that allows for the drive
in / drive out allowance can only be claimed if the vehicle is brought back into the workshop for this action alone
to be undertaken.
http://topix.jaguar.jlrint.com/topix/service/procedure/556427/ODYSSEY_FSA/G1890149/e... 8/4/2015