TSB-96-15-98
Service Bulletin Details
Public Details for: TSB-96-15-98
Audi: some vehicles, while driving, would receive false warnings lights of door mirrors, of vehicles in blind spot when no vehicle is present, from side assist. Software need to be updated. Model 2014-15 a5, s5, rs 5, cabriolet. *p
Models from 2015
2015 AUDI A5 |
Models from 2014
2014 AUDI A5 |
2014 AUDI RS 5 |
2014 AUDI S5 |
Technical Service Bulletin 96 Lane changing assist false warnings SB-10058589-5912 96 15 98 2039096/3 July 13, 2015. Supersedes Technical Service Bulletin Group 96 number 15-92 dated March 25, 2015 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A5, S5 2014 All Not Applicable A5, S5 2015 000001 - 055040 Not Applicable RS 5 2014 All Not Applicable RS 5 2015 900001 - 901650 Not Applicable A5 Cabriolet, S5 Cabriolet 2014 All Not Applicable A5 Cabriolet, S5 Cabriolet 2015 000001 - 004501 Not Applicable RS 5 Cabriolet 2014 All Not Applicable RS 5 Cabriolet 2015 900001 - 900210 Not Applicable Condition REVISION HISTORY Revision Date Purpose 3 - Revised header data (Updated VIN breaks) 2 3/25/2015 Revised header data (Added A5 Coupe) 1 11/25/2014 Initial publication • Customer may report that Audi side assist is providing false warnings (no vehicle is present in the blind spot). • No faults related to Audi side assist are stored. • This TSB does not refer to warning messages on the instrument cluster. It applies only to false displays of the warning lights in the door mirrors. Technical Background Incorrect software parameterization. © 2015 Audi of America, Inc. Page 1 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Production Solution Optimized software parameterization. Service SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the side assist control module, J769 (address word 3C) using the SVM action code as listed in the table below, if necessary. An update with remote control is only possible in USB operation when the USB cable is connected. Model All Old Software Part Number Old Software Version New Software Part Number 8T0907566B 0071 8T0907566B © 2015 Audi of America, Inc. New Software Version SVM Code Input (or higher) 0071 3CA013 Page 2 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Warranty Claim Type: Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 9635 Damage Code: 0039 Labor Operations: Update side assist control module 9635 2599 Time stated on diagnostic protocol (Max 100 TU) Diagnostic Time: GFF No allowance 0 TU Road test prior to service procedure 0121 0002 10 TU Road test after service procedure 0121 0004 10 TU Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2039096/3 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Additional Information The following Technical Service Bulletin will be necessary to complete this procedure: • TSB 2011732 00 Software Version Management (SVM), operating instructions. All part and service references provided in this TSB (2039096) are subject to change and/or removal. Always check with your Parts Dept. and service manuals for the latest information. © 2015 Audi of America, Inc. Page 3 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.