T-TT-0288-14
Service Bulletin Details
Public Details for: T-TT-0288-14
Summary to be provided on a future date.
- 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -
Models from 2008
| 2008 TOYOTA AVALON |
| 2008 TOYOTA CAMRY |
Models from 2007
| 2007 TOYOTA CAMRY |
Tech Tip
T-TT-0288-14
March 26, 2014
APPLICABLE VEHICLES
2009-2014
2008-2014
2009-2014
Highlander
Avalon
Venza
2007-2014
2011-2014
Camry
Sienna
CONDITION
Prior to installing remanufactured U660 and U760 transaxles , it is necessary to remove the lower oil cooler tube
union from the original transaxle case and install it into the reman unit. A NEW 0-ring and printed installation
instructions are supplied in separate bag with the reman unit. An instruction tag is also affixed to the unit.
Fi ure 1
New 0-ring and Installation
Instruction Sheet
Instruction Tag
RECOMMENDATIONS
1. Remove the oil cooler tube union from the original transaxle case.
2. Remove the 0-ring from the oil cooler tube union.
3. Coat the NEW 0-ring with ATF and install it onto the oil cooler tube union .
4. Install the oil cooler tube union in the reman transaxle case . Torque: 27 N·m {275 kgf-cm , 20ft·lbf}
Note: During the transition period , dealerships may receive transmissions with the current or new process and
both can be utilized for repairs.
Figure 2
Lower Oil Cooler Tube Union
Installation Location
Expires on
Ver 2 3 01 /0112014 T
03/26/2015
© 201 4, Toyota Motor Sales, USA
Page 1 of 2
Tech Tip
T-TT-0288-14
March 26 , 2014
LINK REFERENCES
This Tech Tip does not contain any link references
Expires on
Ver 2.3 01101/2014 T
03/26/2015
© 2014 , Toyota Motor Sales , USA
Page 2 of 2