T-SB-0016-13
Service Bulletin Details
Public Details for: T-SB-0016-13
Summary to be provided on a future date.
- 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 -
Models from 2012
2012 TOYOTA TACOMA |
Models from 2011
2011 TOYOTA TACOMA |
Models from 2010
2010 TOYOTA TACOMA |
Models from 2009
2009 TOYOTA TACOMA |
Models from 2008
2008 TOYOTA TACOMA |
Models from 2007
2007 TOYOTA TACOMA |
Models from 2006
2006 TOYOTA TACOMA |
Models from 2005
2005 TOYOTA TACOMA |
@TOYOTA Technical Service Bulletin February 1, 2013 T-SB-0016-13 4WD Rear Propeller Shaft {Driveshaft) Clunk/Thunk Noise Service Category Drivetrain Section Drive ShafUPropeller Shaft Market Toyota Supports ~ ASE Certification ~ USA Applicability YEAR{S) MODEL(S) ADDITIONAL INFORMATION 2005 - 2012 Tacoma Transmission(s): 4AT, 5AT Introduction Some 4WD 2005- 2012 model year Tacoma vehicles equipped with an automatic transmission may exhibit a clunk/thunk noise from the rear of the vehicle or a "bump-from-behind" sensation just before a stop or when accelerating from a stop. Improvements have been implemented on the rear propeller shaft (driveshaft) to reduce this condition. Utilize the following repair procedure to address this condition. Warranty Information OP CODE DESCRIPTION MY MODEL R & R Rear Propeller Shaft WHEEL BASE* ATM TIME OFP Short A340F 0.6 37110-04220 37110-04221 R & R Rear Propeller Shaft Assembly with Center Support Bearing '05-' 12 Tacoma Long 0.8 A750F Super Long T2 91 55 37 100-04390 37100-04391 A340F TC1103 T1 37 100-04340 37 100-04341 37 100-04360 37 100-04361 *Wheel Base Length: Short = 2785 mm (109.6 in.), Long = 3235 mm (127.4 in.), Super Long= 3570 mm (140.6 in.) APPLICABLE WARRANTY • This repair is covered under the Toyota Powertrain Warranty. This warranty is in effect for 60 months or 60,000 miles, whichever occurs first, from the vehicle's in-service date. • Warranty application is limited to occurrence of the specified condition described in this bulletin. © 201 3 Toyota Motor Sales, USA Page 1 of 3 .. @TOYOTA T-SB-0016-13 February 1, 2013 Page 2 of 3 4WD Rear Propeller Shaft (Driveshaft) Clunk/Thunk Noise Parts Information ATM WHEEL BASE" PREVIOUS PART NUMBER CURRENT PART NUMBER PART NAME QTY Short 37110-04220 37110-04221 37110-04222 Shaft Assy, Propeller 1 37100-04390 37100-04391 371 00-04392 37100-04340 37100-04341 37100-04342 37100-04360 37100-04361 37100-04362 A340F Long A750F Super Long 1 Shaft Assy, Propeller wlCenter Bearing 1 1 •Wheel Base Length: Short= 2785 mm (109.6 in.), Long= 3235 mm (127.4 in.), Super Long= 3570 mm (140.6 in.) Repair Procedure 1. Confirm that the condition is the rear propeller shaft (driveshaft) clunk/thunk noise. A. Test drive the vehicle and confirm the condition. B. Place the transfer case in 4WD High. Remove the rear propeller shaft (driveshaft) and test drive the vehicle. Refer to the Technical Information System (TIS), applicable model year Repair Manual: • 2005 Tacoma: Drivetrain - Drive Shaft/Propeller Shaft - "Propeller w/Center Bearing Shaft Assy (4WD Regular Cab Type) I (4WD Access Cab and Double Cab Tvpe): Overhaul" 2006 - 2012 Tacoma: Drivetrain - Drive Shaft/Propeller Shaft - "Propeller Shaft: Rear Propeller Shaft Assembly (for Regular Cab 4WD) I (forAccess Cab 4WD and Double Cab 4WD): Removal" • 2006: (for Regular Cab 4WD) I (for Access and Double Cab 4WD) • 2007: (for Regular Cab 4WDI I (for Access and Double Cab 4WD) • 2008 (for Regular Cab 4WD) I (for Access and Double Cab 4WD) • 2009 (for Regular Cab 4WDI I (for Access and Double Cab 4WD) • 201 O (for Regular Cab 4WD) I (for Access and Double Cab 4WD) • 2011 (for Regular Cab 4WD) I (for Access and Double Cab 4WD) 2012 (for Regular Cab 4WD) I (for Access and Double Cab 4WD) © 2013 Toyota Motor Sales, USA . @TOYOTA T-SB-0016-13 February 1, 2013 Page 3 of 3 4WD Rear Propeller Shaft (Driveshaft) Clunk/Thunk Noise Repair Procedure (Continued) C. Is the clunk/thunk noise eliminated when coming to a stop and/or when accelerating from a stop? • YES - Replace the rear propeller shaft (driveshaft) assembly. Go to step 2. • NO - This bulletin does NOT apply. Continue diagnosis to isolate the cause of the condition. 2. Install the NEW propeller shaft (driveshaft) assembly. Refer to TIS, applicable model year Repair Manual: 2005 Tacoma: Drivetrain - Drive Shaft/Propeller Shaft - "Propeller w/Center Bearing Shaft Assy (4WD Regular Cab Tvee) I (4WD Access Gab and Double Cab Type): Overhaul" • 2006 - 2012 Tacoma: Drivetrain - Drive Shaft/Propeller Shaft- "Propeller Shaft: Rear Propeller Shaft Assembly (for Regular Cab 4WD) I (for Access Cab 4WD and Double Cab 4WD): Installation" • 2006: (for Regular Cab 4WD) I (for Access and Double Cab 4WDJ • 2007: (for Regular Cab 4WD) I (for Access and Double Cab 4WDJ • 2008 (for Regular Cab 4WD) I (for Access and Double Cab 4WD) • 2009 (for Regular Cab 4WD) I (for Access and Double Cab 4WD) • 2010 (for Regular Cab 4WD) I (for Access and Double Cab 4WD) • 2011 (for Regular Cab 4WD) I (for Access and Double Cab 4WD) • 2012 (for Regular Cab 4WD) I (for Access and Double Cab 4WD) NOTE Re-use the spacers provided under the center support bearing to ensure the proper alignment of the center support bearing. 3. Test drive and confirm that NO abnormal vibrations or shudders occur while driving, and that the propeller shaft (driveshaft) clunk/thunk noise· is eliminated. © 2013 Toyota Motor Sales, USA