T-SB-0128-14

@TOYOTA
T-SB-01 28-14
Technical Service Bulletin
Sept ember 19, 2014
Hole{s) in Driver's Side Floorboard Carpet
Service
Category
Vehicle Interior
Section
Inte ri or PanelsfTrim
Market
Toyota Supports ~
ASE Certification
W
USA
Applicability
YEAR(S)
MODEL(S)
ADDITIONAL INFORMATION
2009 - 2014
Venza
Drive Type(s): 2WD, 4WD, FF
Engine(s): 1AR, 2GR
Transmission(s): 6AT
VDS(s): BA3BB, BE11A, BK1 1A, BK3BB, ZA3BB,
ZE11A, ZK11A, ZK3BB
Introduct ion
Some 2009 - 20 14 model year Venza vehicles may exhibit a condition in which there are one or
two holes in the driver's side carpet near the brake pedal. In some cases, there may be one or two
bolt studs visible through the holes in the carpet. There are two stud bolts welded to the floorboard
in this area that are used to attach the parking brake cable bracket to the vehicle body. Over time,
these stud bolts may wear through the driver's side carpeting resulting in the holes (this condition is
only noticed when the driver's side floor mat is out of the vehicle). Follow the Repa ir Procedure in
this bulletin to address this condition .
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
743511
R & R Front Floor Carpet and/or Mat
1.4
58510-0T011-CO
58510-0T012-CO
58510-0T014-CO
94
19
APPLICABLE WARRANTY
• This repair is covered under th e Toyota Basic Warranty. This warranty is in effect for 36 months
or 36,000 miles, whichever occurs first, from th e vehicle's in-service date.
• Warra nty application is limited to occurrence of the specified condition described in
this bulletin.
© 20 14 Toyota Motor Sa les, USA
Page 1 of 3
@TOYOTA
T-SB-0 128-14
September 19, 2014
Page 2 of 3
Hole(s) in Driver's Side Floorboard Carpet
Parts Info rmation
PART NUMBER
PART NAME
QTY
58510-0TO 11-CO
58510-0T012-CO
58510-0TO 14-CO
Carpet Assy, Floor Front
1
90467-A0024
Clip
2
Required Tools & Equipment
SPECIAL SERVICE TOOLS (SST)
PART NUMBER
QTY
Plastic Pry Tool Kit*
00002-06020-01
1
• Essential SST.
NOTE
Additional SSTs may be ordered by calling 1-800-933-8335.
Repair Procedure
1. Remove all of the necessary vehicle components to remove the Front Floor Carpet Assembly.
2. Remove the Front Floor Carpet Assembly to
access the parking brake cable bracket.
Figure 1.
1
Stu d Bolts
2
Parking Brake Cable Bracket
3
Parking Brake Cabl e
© 2014 Toyota Motor Sales, USA
@TOYOTA
T-SB-0128-14
September 19, 2014
Hole(s) in Driver's Side Floorboard Carpet
Repair Procedure (Co ntinued)
3. Install the clips over the ends of both stud bolts by
pushing the clips onto the bolts.
Figure 2.
...,...,.......,......,....,
NOTE
• Ensure th at both clips are fully inserted
onto stud bolts .
• Do NOT alter the length of the stud bolts
during repair.
1
4. Install the NEW Front Floo r Carpet Assembly.
5. Reassemble vehicle in reverse order of disassembly.
© 2014 Toyota Motor Sales. USA
j
Clips Installed t o Stud B olts
Page 3 of 3