S-SB-0019-14

Technical Service Bulletin
rl SC:::IClrl
CD
Au g ust 7, 2014
S-SB-0019-14
Front Wheel Opening Extension Pad Installation During
PDS
Service
Category
General
Section
Pre-Delivery Service
Market
Scion Supports ~
ASE Certification-
USA
Applicability
YEAR(S)
MODEL(S)
2015
iQ
ADDITIONAL INFORMATION
Introduction
The front wheel opening extension pad set (right and left front wheel opening extension pads,
4 screw clips) is loaded in the luggage compartment at the assembly plant to avoid damage in transit.
Install the front wheel opening extension pads to the vehicle during Pre-Delivery Service (PDS) .
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
NIA
Not Applicable to Warranty
-
-
-
-
Installation Procedure
1. Remove the 2 tapping screws from the engine
under cover, and remove the 2 screw clips from
the front bumper and the fender liner.
Figure 1.
HINT
• Do NOT dispose of the screws, they will
be reused.
• The clips can be disposed of, they will not
be reused.
© 2014 Toyota Motor Sales, USA
Page 1 of 2
S-SB-0019-14
Aug ust 7, 2014
Page 2 of 2
Front Wheel Opening Extension Pad Installation During PDS
Installat ion Procedure (Continued)
2. Install the new screw clips to the front bumper
cover and the fender liner.
Figure 2.
r
HINT
I
Be sure to install the extension pads using the
NEW clips supplied.
3. Align the front wheel opening extension pad
holes with the screw clips and secure it w ith
2 tapp ing screws.
Figure 3.
HINT
There is a distinguishable mark on each pad.
4 . Repeat steps 1 - 3 to install the other front wheel opening extension pad.
© 2014 Toyota Motor Sales, USA