T-SB-0048-13
Service Bulletin Details
Public Details for: T-SB-0048-13
Summary to be provided on a future date.
- 2013 - 2012 - 2011 - 2010 - 2009 -
Models from 2013
2013 TOYOTA COROLLA |
2013 TOYOTA MATRIX |
Models from 2012
2012 TOYOTA COROLLA |
2012 TOYOTA MATRIX |
Models from 2011
2011 TOYOTA COROLLA |
2011 TOYOTA MATRIX |
Models from 2010
2010 TOYOTA COROLLA |
2010 TOYOTA MATRIX |
Models from 2009
2009 TOYOTA COROLLA |
2009 TOYOTA MATRIX |
@TOYOTA Technical Service Bulletin March 25, 2013 T-SB-0048-13 Uneven Rear Brake Pad Wear Service Category Brake Section Brake (rear) Market Toyota Supports ~ ASE Certification ¥ USA Applicability YEAR(S) MODEL(S) 2009- 2013 Corolla 2009 - 2013 Matrix ADDITIONAL INFORMATION Introduction Some 2009 - 201 3 model year Corolla and Matrix vehicles may exhibit uneven brake pad wear on the rear disc brake pads. The vehicle may also exhibit a grinding or scraping noise due to the uneven brake pad wear. An updated rear disc brake pad kit has been developed to address this condition . Production Change Information This bulletin applies to vehicles produced BEFORE the Production Change Effective VINs shown below. MODEL Corolla PLANT DRIVETRAIN PRODUCTION CHANGE EFFECTIVE VIN Takaoka JTDBU4EE#DJ11 2296 TM MC 2T1 BU4EE#DC028654 TMM MS FWD 5YEBU4EE#DP 143363 2T1KE4EE#DC051047 Matrix TMMC 2T1 KU4EE#DC037631 Warranty Information OP CODE DESCRIPTION TIME 473061 R & R Pad Kit 0.6 Combo A Opposite Side 0.3 OFP T1 T2 04466-02210 87 19 APPLICABLE WARRANTY • This repair is covered under the Toyota Basic Warranty. This warranty is in effect for 36 months or 36,000 miles , whichever occurs first, from the vehicle's in-service date. • Warranty application is limited to occurrence of the specified condition described in this bulletin. © 2013 Toyota Motor Sales, USA Page 1 of 3 @TOYOTA March 25, 2013 T-SB-0048-13 Page 2 of 3 Uneven Rear Brake Pad Wear Parts Information PREVIOUS PART NUMBER CURRENT PART NUMBER PART NAME QTY 04466-02210 04466-02270 04466-02260 Pad Kit, Disc Brake, Rear 1 Required Tools & Equipment PART NUMBER QTY Variable Pin Wrench Set* 09960-10010 1 Rear Disc Brake Tool Set* 09719-14020 1 Companion Flange Holding Tool* 09330-00021 1 SPECIAL SERVICE TOOLS (SST) * Essential SST. NOTE Additional SSTs may be ordered by calling 1-800-933-8335. Repair Procedure 1. Remove the rear brake pads. Refer to the Technical Information System (TIS), applicable model and model year Repair Manual: • 2009 I 2010 I 2011 I 2012 I 2013 Corolla : Brake - Brake (Rear) - "Brake (Rear) : Rear Brake (for Disc Type) : Removal" • 2009 I 2010 I 2011 I 2012 I 2013 Matrix: Brake - Brake (Rear) - "Brake (Rear): Rear Brake (for Torsion Beam Type Suspension): Removal" 2. Inspect the rotor and pads. Refer to TIS, applicable model and model year Repair Manual: • 2009 I 2010 I 2011 I 2012 I 2013 Corolla: Brake - Brake (Rear) - "Brake (Rear) : Rear Brake (for Disc Type): Inspection" • 2009 I 2010 I 2011 I 2012 I 2013 Matrix : Brake - Brake (Rear) - "Brake (Rear): Rear Brake (for Torsion Beam Type Suspension): Inspection" © 2013 Toyota Motor Sales, USA r .. ' @TOYOTA March 25, 2013 T-SB-0048-13 Uneven Rear Brake Pad Wear Repair Procedure (Continued) 3. Install the NEW brake pads. Refer to TIS, applicable model and model year Repair Manual: • 2009 I 2010 I 2011 I 2012 I 2013 Corolla: Brake - Brake (Rear) - "Brake (Rear): Rear Brake (for Disc Type): Installation " • 2009 I 2010 I 2011 I 2012 I 2013 Matrix: Brake - Brake (Rear) - "Brake (Rear): Rear Brake (for Torsion Beam Type Suspension): Installation" © 20 13 Toyota Motor Sales, USA Page 3 of 3