T-SB-0166-13
Service Bulletin Details
Public Details for: T-SB-0166-13
Summary to be provided on a future date.
- 2014 -
Models from 2014
2014 TOYOTA RAV4 |
@TOYOTA T-SB-0166-13 Technical Service Bulletin November 11, 2013 2014 RAV4 Pre-Delivery Service (PDS) Service Category General Section Pre-Delivery Service Market Toyota Supports ~ ASE Certification - USA Applicability YEAR(S) MODEL(S) 2014 RAV4 ADDITIONAL INFORMATION Introduction Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: • Careful inspection for paint chips/scratches and body dents/dings. • Proper operation of electrical accessories (including interior light, clock, and radio reset). • Interior clean liness. • Proper function of mechanical systems. Customer retention and proper maintenance of vehicles has been a major focus for Toyota . To help remind customers that regular oil changes are essential to the proper maintenance of their vehicle, dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing this, customers will be reminded to return to your dealership for their first oil change. Your current oil change reminder sticker may be used. (See PDS Check Sheet item 8 of "Final Inspection & Cleaning.') A new PDS Check Sheet has been developed for the 2014 model year RAV4. Some check points have been added, expanded, or clarified. Bulletins are available for items in bold type. Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 00101 3 Pre-Delivery Service (PDS) 1.0 N/A - - Warranty Policy If the need for additional repairs or adjustment is noted during PDS, the required service should be performed under warranty. Reimbursement will be managed under the warranty policy. The Warranty Policy and Procedures Manual requires that you maintain the completed PDS check sheet in the customer's file. If you cannot produce a completed form for each retailed vehicle upon TMS and/or Region/Distributor audit, the PDS payment amount will be subject to debit. © 2013 Toyota Motor Sales, USA Page 1 of 6 @TOYOTA November 11, 2013 T-SB-0166-13 Page 2 of 6 2014 RAV4 Pre-Delivery Service (PDS) Warranty Policy (Continued) An additional Repair Order completed in conjunction with normal PDS must have time punch/flags for service. If multiple repairs are performed , separate time flags must be punched for each repair. Required Tools & Equipment REQUIRED EQUIPMENT SUPPLIER QTY TS2UN IT Techstream 2.0* TIS Techstream PART NUMBER ADE Techstream Lite TSPKG1 1 TSLITEDLR01 * Essential SST. NOTE • Only ONE of the Techstream units listed above is required. • Software version 8.30.023 or later is required. • Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE) at 1-800-368-6787. Before Inspection When performing new car PDS, install DIC Cut Fuse before moving vehicle from storage lot so that FUNCTIONAL OPERATION checks can begin as soon as vehicle is moved into service stall . 1. Install DIC Cut Fuse - see check sheet 2. Install antenna* Functional Operation Apply parking brake and cycle the ignition "IG-ON ," place gear selector in reverse, turn on lights and rear defogger. Unlock all doors, rel ease fuel door. 1. Check dome, courtesy, map, and sun visor lights 2. Check warning/indicator lights, gauges, and horn 3. Check windshield wipers and washers 4. Check headlights, instrument lights, turn signals, emergency flashers, and brake lights 5. Check inside/outside rear view mirror operation/adjustment* © 2013 Toyota Motor Sales, USA @TOYOTA November 11, 2013 T-SB-0166-13 Page 3 of 6 2014 RAV4 Pre-Delivery Service (PDS) Functional Operation (Continued) 6. Check cigarette lighter* and power outlets Check the power outlet using an electrical accessory designed for this use. 7. Check audio/navigation*/backup camera* systems and set clock For navigation, set the destination search area to local position 8. Check sliding roof* 9. Check Rear Seat Entertainment System operation* 10. Install shift-lock override button cover Walkaround Inspection Starting at the left front door, check window and door lock operation and the operation of all power windows and door locks from master switch , on vehicles so equipped. While walking around vehicle in a counterclockwise direction, open left rear door (if applicable) and check operation of window regulator and door lock, set child safety door locks to the normal (unlocked) position. Assure tightness of interior garnishes and check seat belts. Inspect lights at rear of vehicle. Repeat checks at right rear door. Inspect right front door window regulator and lock operation and garnishes. Check seats and seat belt operation . Continue on around to the front of the vehicle checking lights. 1. Check Smart Key System* - T-SB-0020-13 2. Check door and door lock operation , including each wireless remote control/theft deterrent system* 3. Check window operation 4. Check that engine starts with all keys 5. Check that child safety door locks are in normal (unlocked) position 6. Check seats and seat belt operation 7. Check rear defogger/rear view mirror defogger* 8. Check side marker, tail , backup, cargo*, and license plate lights 9. Check luggage compartment light* and trim appearance 10. Check jack and tool installation 11 . Check headlight aim Refer to the Repair Manual for procedures. © 201 3 Toyota Motor Sales, USA @TOYOTA November 11, 2013 T-SB-0166-13 Page 4 of 6 2014 RAV4 Pre-Delivery Service (PDS) Under Hood 1. Check engine oil level 2. Check brake fluid level Visually inspect using see-through reservoir. 3. Check engine coolant level 4. Check windshield washer fluid level 5. Check battery state-of-charge using Digital Battery System Analyzer Refer to Service Bulletin No. PG001-06, "Battery Maintenance for In-Stock Vehicles & Pre-Delivery." NOTE Battery SOC should be a minimum of 75% . Please enter the SOC Reading on the space provided on the check sheet and attach the printout to the check sheet. 6. Inspect for fuel , oil, coolant, and other fluid leaks Under Vehicle (On Hoist) 1. Remove disc brake anti-rust covers/anti-corrosion wheel ti Im* - PDO 17-04 Visually inspect rotors for rust. NOTE For best rotor rust prevention, retain wheel film on vehicle until just prior to customer delivery. 2. Inspect tires for defects/damage and adjust air pressure (including spare tire) The recommended tire inflation pressure changes with tire size, driving cond itions and vehicle model. For precise tire pressure information, refer to the Owner's Manual and/or tire information label located on the veh icle. Sidewa ll "Maximum" cold tire inflation pressure should not be used for normal driving. 3. Initialize Tire Pressure Warning System (TPWS) - see check sheet 4 . Install wheel covers/ca ps/spare tire wheel covers* 5. Inspect for fuel, oi l, coolant, and other fluid leaks 6. Inspect under the vehicle for damage, rust, etc. 7. Visually check bolts and nuts on chassis and powertrain for looseness 8. Install rubber body plugs* (stored in glove box or center console) © 2013 Toyota Motor Sales, USA @TOYOTA November 11, 2013 T-SB-0166-13 Page 5 of 6 2014 RAV4 Pre-Delivery Service (PDS) Road Test A complete road test helps assure customer satisfaction. Drive veh icle over a variety of road surfaces and driving conditions. Check for unusual noise and driving performance. 1. Check cold engine operation Check starting and fast idle operation performance. 2. Check engine operation during warm-up Check that engine operates smoothly during warm-up. Check for unusual noise, engine vibration , rough idle, etc. 3. Check engine at normal operating temperature Check engine performance over a broad range of driving conditions, including idle quality, acceleration , cruise, and deceleration. 4. Check automatic transmission operation Check automatic transmission operation , including operation in each range, neutral start switch , and shift lock system. 5. Check brake and parking brake operation Check brake function, including unusual noise, parking brake performance, and all related brake system indicator lights. 6. Check steering operation and off-center/vehicle pull/flutter Check steering function . Check steering off-center/vehicle pull/flutter. 7. Inspect for abnormal noise and vibration 8. Inspect for squeaks and rattles 9. Check front and rear* heater and A/C operation 10. Check cruise control operation* Check cruise control , including On-Off switch , "SET/COAST," "RESUME/ACCEL," and "CANCEL:' functions. 11 . Check front seat heater/ventilation operation* © 2013 Toyota Motor Sales, USA @TOYOTA T-SB-0166-13 November 11, 2013 Page 6 of 6 2014 RAV4 Pre-Delivery Service (PDS) Final Inspection & Cleaning 1. Remove interior protective covers, unnecessary labels, tags, etc. (Remove protective covers just before delivery to customer.) Remove plastic covers from door panels, seats, head restraints, and sun visors, as required. Remove labels, tags, and stickers (except those containing owner information). NOTE Consumer information labels, such as airbag information warning and bumper information labels, MUST be left on the vehicle until delivery to a retail customer. 2. Visually inspect all interior parts for installation, damage, fit, dirt, etc. 3. Verify floor mat application and install using retaining clips* - T-SB-0023-13 4. Remove Rapgard™ and clear protective bumper film* Ensure that ALL glue residue is removed. 5. Wash and clean vehicle 6. Inspect paint finish for scratches, chips, rust, dents, damage, etc. 7. Inspect exterior body parts for proper installation, damage, rust, etc. 8. Place oil change sticker on inside of windshield, top left corner Complete the mileage or date recommendation and apply the oil change reminder sticker to the inside of the windshield , top left corner. You may use your current oil change reminder sticker. 9. Place Owner's Guide and first aid kit portfolio* in glove box 10. Perform Techstream Health Check Perform Health Check to ensure that diagnostic trouble codes are not present. Health Check results can be printed for the customer at delivery, or for the dealer file, using the Diagnostic Report function . 11 . Install front license plate and mounting bracket* - see check sheet *Inspect or install when equipped or required © 201 3 Toyota Motor Sales, USA