JTB00275NAS2

Page 1 of 3
TECHNICAL BULLETIN
JTB00275NAS2
24 OCT 2013
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools,
and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some
vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-ityourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized
Jaguar service facility to determine whether this bulletin applies to a specific vehicle.
This reissue replaces all previous versions. Please destroy all previous versions. Only refer to the
electronic version of this Technical Bulletin in TOPIx.
Changes are highlighted in gray
SECTION: 501-10
Folding Tray Latch Broken
AFFECTED VEHICLE RANGE:
XJ Range (X351)
Model Year:
2012-2013
VIN:
V25520-V59157
MARKETS:
NAS
CONDITION SUMMARY:
Situation: The folding tray latch may not latch closed and/or the latch may be broken.
Cause: This may be caused by washers fitted behind latch, resulting in increased force at latch fixing point.
Action: Should a customer express this concern, follow the Service Instruction outlined below.
PARTS:
C2D13489XXX
Picnic Tray Latch
Quantity: 2
C2D38514
Spacer
Quantity: 2
TOOLS:
No Tools Required
WARRANTY:
NOTE: Repair procedures are under constant review, and therefore times are subject to change;
those quoted here must be taken as guidance only. Always refer to TOPIx to obtain the latest repair
time.
NOTE: DDW requires the use of causal part numbers. Labor only claims must show the causal part
number with a quantity of zero.
DESCRIPTION
SRO
TIME (HOURS)
CONDITION CODE
CAUSAL PART
Folding tray latch - Pair - Renew
76.14.16
0.2
01
C2D13489
NOTE: Normal Warranty policies and procedures apply.
SERVICE INSTRUCTION:
1. Open the left-side folding tray.
http://topix.jaguar.jlrint.com/topix/service/document/442168
10/28/2013
Page 2 of 3
2.
NOTE: Discard any washers found behind
the fixing.
Remove and discard the folding tray latch.

 Remove the fixing.
3. Install the new spacer on to the new folding tray
latch.
4. Install the new folding tray latch.
http://topix.jaguar.jlrint.com/topix/service/document/442168
10/28/2013
Page 3 of 3

 Install the fixing.
5. Close the folding tray.
6. Carry out steps 1-5 to the right-side folding tray latch.
http://topix.jaguar.jlrint.com/topix/service/document/442168
10/28/2013