JTB00346NAS1

Page 1 of 2
TECHNICAL BULLETIN
JTB00346NAS1
28 APR 2014
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools,
and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some
vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-ityourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized
Jaguar service facility to determine whether this bulletin applies to a specific vehicle.
SECTION: 501-00
Transit Protection / Wrapguard Staining
AFFECTED VEHICLE RANGE:
F-TYPE (X152)
Model Year:
VIN:
2014 Onwards
K00001 Onwards
XF (X250)
Model Year:
VIN:
2014 Onwards
U09026 Onwards
XJ Range (X351)
Model Year:
2014 Onwards
VIN:
V58603 Onwards
XK Range (X150)
Model Year:
2014 Onwards
VIN:
B52041 Onwards
MARKETS:
NAS
CONDITION SUMMARY:
Situation: At Pre-Delivery Inspection (PDI) upon removal of the transit protection / wrapguard, there may be
paint stains underneath the wrapguard. This staining can be described as 'bloom' or a 'milky' type of stain.
Cause: This may be caused by moisture being trapped under the transit protection / wrapguard. .
Action: To remove the stain, follow the Service Instruction outlined below.
PARTS:
No Parts Required
TOOLS:
No Tools Required
WARRANTY:
NOTE: Repair procedures are under constant review, and therefore times are subject to change;
those quoted here must be taken as guidance only. Always refer to TOPIx to obtain the latest repair
time.
NOTE: DDW requires the use of causal part numbers. Labor only claims must show the causal part
number with a quantity of zero.
DESCRIPTION
Transit protection and staining - Rectification -
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
76.96.26
0.5
D4
T2R8822
http://topix.jaguar.jlrint.com/topix/service/document/474572
4/28/2014
Page 2 of 2
F-TYPE
Transit protection and staining - Rectification XF
76.96.26
0.6
D4
C2Z16958
Transit protection and staining - Rectification XJ
76.96.26
0.5
D4
C2D20215
Transit protection and staining - Rectification XK
76.96.26
0.6
D4
C2P21670
NOTE: Normal Warranty policies and procedures apply.
SERVICE INSTRUCTION:
1. Fully remove the transit protection / wrapguard from the vehicle.
2. Inspect vehicle for 'bloom' or a 'milky' type of
stain.
3.
CAUTION: When using an infrared curing unit, appropriate actions must be taken to protect
plastic components from heat damage.
Subject the vehicle to a 30-minute bake cycle at 140°F / 60°C in a conventional spray booth.

 If a conventional spray booth is not available, apply localized heat from an infrared curing unit.
4. Once cool, polish the affected area.
http://topix.jaguar.jlrint.com/topix/service/document/474572
4/28/2014