PI0785B

File in Section:
Service Bulletin
Bulletin No.:
Date:
PI0785B
May, 2013
PRELIMINARY INFORMATION
Subject:
DTC C027B, Low Brake Pedal Feel After Master Cylinder Repairs
Models:
2009-2014 Buick Enclave
2010-2012 Buick LaCrosse
2011-2014 Buick Regal
2012-2014 Buick Verano
2013-2014 Buick Encore
2009-2014 Cadillac CTS, SRX
2013-2014 Cadillac ATS, XTS
2009-2012 Chevrolet Colorado
2009-2014 Chevrolet Corvette, Impala, Malibu, Traverse
2010-2014 Chevrolet Camaro, Equinox
2011-2014 Chevrolet Cruze
2012 Chevrolet Captiva Sport
2012-2014 Chevrolet Sonic
2013-2014 Chevrolet Spark
2009-2012 GMC Canyon
2009-2014 GMC Acadia
2010-2014 GMC Terrain
This PI is being revised to add the 2014 model year, include Encore model and update the
Parts and Warranty Information. Please discard PI0785A.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern
Some customers may comment on a low brake pedal during brake pedal apply. During diagnosis, a DTC C027B may
be found stored in the EBCM. This concern may have started after the master cylinder was unbolted from the brake
booster for any reason.
This may be caused by a small vacuum leak between the master cylinder and the brake booster. There is an O-ring
between the master cylinder and the brake booster that may have fallen off during the prior repairs.
Recommendation/Instructions
2515865
Inspect for the O-ring (1) between the master cylinder and the brake booster before performing any other diagnostics
for the low brake pedal or the DTC C027B. Replace the O-ring if missing or damaged.
Tip: Exhaust the booster vacuum by either pumping the brake pedal or pulling the check valve out prior to removing
the master cylinder. The suction may be helping to dislodge the O-ring when pulling the master cylinder out.
Parts Information
Refer to the Parts Catalog for the appropriate part number and availability. In some cases the brake master cylinder
O-ring seal may not be serviceable separately.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation
Description
Labor Time
2480008*
Replacing the Brake Master Cylinder O-ring Seal
0.3 hr
2440100**
Master Cylinder Replacement
Use Published
Labor
Operation Time
*This is a unique labor operation for bulletin use only. It will not be published in the Labor Time Guide.
** Vehicles that come without O-ring seal separate from master cylinder.