SB-12-BD-002

Service Bulletin Details

Public Details for: SB-12-BD-002

Summary to be provided on a future date.


- 9999 -

GROUP
HyunDRI I
NUMBER
nEWTHlnKlnG.
nEW POSSIBILITIES. 1----B_O_D_Y
_ _ _-+-_ _1_2_-B_D
_ -0_0_2_-----i
Technical Service Bulletin
DATE
MODEL(S)
DECEMBER 2012
TUCSON (LM)
OUTSIDE REAR VIEW MIRROR REPAIR
SUBJECT:
Description: Some Tucson (LM) may experience a sound from the left or right outside mirrors. This bulletin
describes the procedure to add Loctite to the outside mirror base mounting screw.
!Applicable Vehicles: SOP - March 31 , 2012
Warranty Information:
Op Code
Operation
Op Time
87610FOO
OUTSIDE REAR VIEW MIRROR
REPAIR(One side)
0.3 M/H
87610F01
OUTSIDE REAR VIEW MIRROR
REPAIR(Both sides)
0.5 M/H
Causal Part #
87610-2S030
87610-2S050
87610-2S060
87620-2S030
87620-2S050
87620-2S060
Nature
Code
Cause
Code
N29
C29
N29
C29
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians , Body Shop Manager, Fleet Repair
OUTSIDE REAR VIEW MIRROR REPAIR
SUBJECT:
Service Procedure:
1.
Remove speaker cover.
Be careful not to damage cover.
2.
Disconnect outside mirror wire harness.
TSB #: 12-BD-002
Page 2 of 6
OUTSIDE REAR VIEW MIRROR NOISE REPAIR
SUBJECT:
3.
Remove 3 mounting bolts.
*NOTE
Tightening torque: 0.7-1.1kgf.m
(6.86-10. 79N-m, 5.06-7 .96ib. ft)
4.
While holding the mirror housing remove
retaining screw and plastic anchor.
&
CAUTION
Be careful not to drop the
mirror.
TSB #: 12-BD-002
Page 3 of 6
SUBJECT:
OUTSIDE REAR VIEW MIRROR REPAIR
5.
Remove mirror pad.
6.
Remove base cover cap as shown in the
picture.
TSB #: 12-80-002
Page 4 of 6
OUTSIDE REAR VIEW MIRROR NOISE REPAIR
SUBJECT:
7.
Remove 3 screws.
8
Clean screws thoroughly.
9
Apply Loctite* to the screw as in the photo.
*NOTE
LOCTITE THREADLOCKER
BLUE 242 or equivalent.
*NOTE
Avoid the top threads.
TSB #: 12-BD-002
Page 5 of 6
SUBJECT:
OUTSIDE REAR VIEW MIRROR REPAIR
10.
Reinstall all three screws.
11.
Reinstall mirror in reverse order.
TSB #: 12-BD-002
Page 6 of 6


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.