2014 COROLLA

@TOYOTA COROLLA
2014 PRE-DELIVERY SERVICE CHECK SHEET
Augus~2013
•·DNDERVE.HICl.'.E(qNHOIS'f)·•.
01 Install DIC Cut Fuse• (see page 2)..................................
D
le~tt~:Q~!~N~~:~~J'.~~~~]~_~ff{:f;2jtl~~·t;~L~Ai·~~~~{f::~~~~~~¥~~:~
Apply parking brake and cycle ignition "JG-ON~· place gear selector in reverse;
tum on lights and rear defogger. Unlock doors; re/ease fuel door.
01 Check dome, courtesy, map, and sun visor lights• ......... .
02 Check warning/indicator lights, gauges, and horn .......... .
03 Check windshield wipers and washers ........................... .
04 Check headlights, instrument lights, turn signals,
emergency ftashers, and brake lights ............................. .
05 Check inside/outside rear view mirror operation/
adjustment .......................................................................
06 Check cigarette lighter* and power outlets ..................... .
07 Check audio/navigation• systems and set clock ............. .
08 Verify Entune/Navigation software version (Display
Audio, Non-HOD Type only)* ...................................... ..
09 Check sliding roof* ......................................................... .
10 lnsiall shift-lock override button cover ........................ .
DD
DD
DD
DO
DO
DD
DO
DD
LILI
LI
01 Remove disc brake anti-rust covers/anti-corrosion
wheel film•......................................................................
01 Inspect tires for defects/damage......................................
02 Initialize Tire Pressure Warning System (TPWS)
(see page 2) ....................................................................
01 Install wheel covers/caps/spare tire wheel covers• .........
02 Inspect for fuel, oil, coolant, and other ftuid leaks ...........
03 Inspect under the vehicle for damage, rust, etc...............
04 Visually check bolts and nuts on chassis and powertrain
for looseness ............. .... ....... ..... ...•.. .... ..... ..... ...... .. ..........
05 Install rubber body plugs• (stored in glove box or
center console) .... .. .... ......... ...... .... . .... ..... ...... ... ........ .... ....
checking each door and window operation, child door locks, seat belts, interior
condition, all lights, luggage compartment contents. Finish by checking headlight
aim and continue into UNDER HOOD checks.
01 Check Smart Key System* ................................... .
DLI
02 Check door and door lock operation, including each
wireless remote control/theft deterrent system* .............. .
03 Check window operation ................................................. .
04 Check that engine starts with all keys ............................ .
05 Check that child safety door locks are in normal
(unlocked) position ......................................................... .
06 Check seats and seat belt operation .............................. .
07 Check rear defogger/rear view mirror defogger* ............. .
08 Check side marker, tail, backup, and license plate lights
09 Check luggage compartment light* and trim appearance
10 Adjust spare tire pressure, inspect for damage, and
check jack and tool installation ....................................... .
11 Check headlight aim ....................................................... .
DLI
DD
DD
LID
LILI
DD
LID
LID
DD
DD
01 Check engine oil and ATM* ftuid levels .......................... .
03 Check engine coolant level ............................................ .
04 Check windshield washer ftuid level. .............................. .
05 Check battery state-of-charge using Digital Battery
System Analyzer (SOC Reading:
%) .... .
06 Inspect for fuel, oil, coolant, and otherftuid leaks .......... .
Reading Before Test:
DD
Reading After Test:
02 Check engine operation during warm-up ....................... ..
03 Check engine at normal operating temperature .............. .
04 Check clutch or transmission operation .......................... .
05 Check brake and parking brake operation ...................... .
06 Check steering operation & off-center/vehicle pull/ftutter.
07 Inspect for abnormal noise and vibration ........................ .
08 Inspect for squeaks and rattles ....................................... .
09 Check heater and NC operation ..................................... .
10 Check cruise control operation• ............................... .
11 Check front seat heater operation• ................................ ..
12 Set/calibrate compass• (see page 2) .............................. .
DD
DD
DD
DLI
LI LI
LILI
DD
LI LI
DD
DD
LID
DD
rJ7'..1~~~!1~$PE:¢ff:IQ.f\l]~~·[it;~~~~rtJ:l~~~~'';;l(i~;~rf~~!
01 Remove interior protective covers, unnecessary labels,
tags, etc. (Remove just before delivery to customer).......
02 Visually inspect all interior parts for installation,
damage, fit, dirt, etc. ........................................................
03 Verify floor mat application and install using
retaining clips*...............................................................
damage, etc. ....................................................................
damage, rust, etc.............................................................
08 Place oil change sticker on inside of windshield, top
left corner.........................................................................
09 Place Owner's Guide and first aid kit portfolio* in
glove box ........ .... ... ...... ..... .... .. ...... ...... .. .... ........ ...... .. ......
10 Perform Techstream Health Check .................................
11 Install front license plate and mounting bracket• (see
COMMENTS:
DD
Enter Odometer Readings
07 Inspect exterior body parts for proper installation,
LILI
DLI
DD
DD
variety of road surfaces and driving conditions. Check for unusual noise and
driving performance.
04 Remove Rapgard™ and clear protective bumper film*....
05 Wash and clean vehicle...................................................
06 Inspect paint finish for scratches, chips, rust, dents,
02 Check brake and clutch* ftuid levels ............................... .
DD
DD
A complete road test helps assure customer satisfaction. Drive vehicle over a
01 Check cold engine operation ........................................... .
start at left. front door. Check window and door lock operation (from master power
switch, if equipped). Continue around vehicle in a counterclockwise direction
LI
DD
page2) ...........................................................................
* Inspect or install when equipped/required.
D
DD
DD
D
D
DD
DD
D
LI
DD
D
Completion and retention of this from is required to comply with Toyota's Warranty Policy.
TECHNICIAN'S SIGNATURE
SERVICE MANAGER'S SIGNATURE
NAME (PLEASE PRINT)
NAME (PLEASE PRINT)
Date
Dealer Name
Dealer Code
We hereby certify that all items
on this form have been checked
and corrected for proper
operation as required.
Vehicle Identification Number (Sticker)
DIC CUT FUSE INSTALLATION
To minimize battery discharge the DI C Cut Fuse has been removed and is stored in the
engine compartment Relay Block. Install the DIC Cut Fuse and confirm all related DTCs
are cleared.
~]DODO O
= -~
OTC Clearing Procedure
1. Connect Techstream.
2. Cycle the ignition switch to the "IG-ON" position.
3. Using Techstream, check any other codes being output.
4. Erase DTCs (81247) and Freeze Frame Data .
oo
D
§~rnD
0
2l
DD 0=o
~§ DD
B
DODO
~
D
~D
oQ
§ Cl
D
1 Remove This D/C Cut Fuse (30A)
2 Install DIC CUT Fuse (30A) Here (Original Location)
TPWS INITIALIZATION
Initialization Procedure
Refer to the Repair Manual for the Initialization procedure . Please note the spare tire does not have a TPWS sensor.
NOTE
To adjust the tire pressure correctly when the outside temperature is significantly colder than shop temperature, perform a
Health Check using Techstream and select the "Compensation Tire Pressure" checkbox. Compensation pressures w ill be
displayed on th e Health Check results screen. Adjust the tire pressure when the tires are cold.
COMPASS CALIBRATION
Refer to the Repair Manual for the Calibration procedure for vehicles equipped with a compass in the rear view mirror.
NOTE
• Do NOT perform calibration of the compass in a place where the Earth's magnetic field is subject to interference
(underground parking, under a steel tower, between buildings, roof parking, near a railroad crossing, near a large
vehicle, etc.).
• During calibration, do NOT operate electric systems (moon roof, power windows, etc.) as they may interfere with the
calibration.
FRONT LICENSE PLATE & MOUNTING BRACKET* INSTALLATION
1. Insert the front license plate into the tabs on the bracket.
2. Attach the clip of bracket to the upper lip of second air intake and rotate bracket upwards.
3. Align the holes on the li cense plate and license plate
bracket with the dimples on the lower grille.
4 . Screw the 2 self-tapping screws directly into the dimples to
install the front license plate and the front license plate
bracket.
NOTICE
• Do NOT pre-drill holes into the bumper.
• Do NOT overtighten the self-tapping
screws.
5~
~
...__
3
I
J
i~
:, ~ /
~/~
©
1
2
3
4
5
6
Dimples
Second A ir Intak e
Front License Plate Bracket
license Plate
Clip
Rotate Brack et
/
1 Self-tappi ng Screw