SSM-68237
Service Bulletin Details
Public Details for: SSM-68237
"issue: creak noise heard from rear edge of roof moving /opening panel in a closed position when driving over uneven surfaces. Between the vin range of v24464 to v59436 cause: moving panel rear edge interior tooth feature coming in to cont
- 2014 - 2013 - 2012 - 2011 - 2010 -
Models from 2014
2014 JAGUAR XJ |
Models from 2013
2013 JAGUAR XJ |
Models from 2012
2012 JAGUAR XJ |
Models from 2011
2011 JAGUAR XJ |
Models from 2010
2010 JAGUAR XJ |
TOPIx - SSM68237 - XJ Moving Panel Rear Edge Tooth Feature Removal Page 1 of 1 Panoramic Roof Opening Glass Tooth removal.pdf Reference SSM68237 Models XJ / X351 Title XJ Moving Panel Rear Edge Tooth Feature Removal Category Body Last modified 13-Sep-2013 00:00:00 Symptom 105000 Roof Options Issue: Creak noise heard from the rear edge of the roof moving / opening panel in a closed position when driving over uneven surfaces. Between the VIN range of V24464 to V59436 Cause: Moving panel rear edge interior tooth feature coming in to contact with the roof frame when closed. Each tooth on the rear edge of the moving panel is approximately 15mm in length Content Action: First confirm that the noise is from this area by partially opening the panel to the tilt position, does the noise disappear. If noise disappears then using the pictures in the attachment for reference and using a suitable tool remove one tooth from the outer rear edge (both Sides) as circled in the pictures. Should any other noise be heard after this operation please refer to the diagnostic section on TOPIx ref 501-17. Roof Opening Panel. http://topix.jaguar.jlrint.com/topix/service/archive/438726/index 9/17/2013 X