T1706A

Service Bulletin Details

Public Details for: T1706A

This temporary repair practive is being issued to authorize the replacement of the lubricating oil filter bypass valve on certain isx12 and isx15 engines anytime the unit is in for maintenance or repairs, with certain restrictions on reimbu


- 9999 -

Models from 9999
9999 CUMMINS ISX12
9999 CUMMINS ISX15 
ISX/QSX CM2250/CM2350 Lubricating Oil Filter Bypass Valve TRP
TRP Number
T1706
Revision Level
A
Date
10-NOV-2015
Expiration Date (U.S. and Canada)
01-JUN-2016
Page 1 of 4
Group Number
Expiration Date (International)
01-JUN-2016
Temporary Repair Practice
ISX/QSX CM2250/CM2350 Lubricating Oil Filter
Bypass Valve TRP
Attention



Worldwide distr./ branches and Div./Reg Offices
U.S / Canadian Distr./Branches and Div. Offices
U.S / Canadian Dealers
This is to revise and replace TRP 1706, dated 16-Oct-2015. This revision is to:
1. Add clarifying narrative.
If additional information is required, contact your Cummins Warranty Operations Group
Leader.
Description
NOTE: The lubricating oil filter bypass valve retaining plug MUST be inspected prior to
starting this repair. If the face of retaining plug is painted with highly visible paint,
STOP. Do NOT perform this field action. The painted retaining plug indicates that the
new bypass valve is already installed. Do NOT proceed any further.
This Temporary Repair Practice (TRP) provides authorization to replace the lubricating oil filter
bypass valve on ISX12 and ISX15 CM2250, ISX12 and ISX15 CM2350, QSX12 and QSX15
CM2250ECF and CM2350, and ISXe5 engines anytime the unit is in for maintenance or
repairs, with certain restrictions on reimbursement.
https://qsol.cummins.com/qs3/pubsys2/xml/en/trp/2017/t1706.html
2/1/2016
ISX/QSX CM2250/CM2350 Lubricating Oil Filter Bypass Valve TRP
Page 2 of 4
The new bypass valve is based on a proven Cummins Midrange design which has more
effective sealing capability and provides better protection to fuel pump lubricated components.
The bypass valve is located in the lubricating oil filter head and is easy to install.
NOTE: This TRP does not reimburse for any SRTs, except those that are listed. It is
recommended, but not required, that this Field Action be performed as part of another
Cummins warrantable repair event to allow reimbursement for charges, such as travel,
troubleshooting or access issues, that are outside the scope of this document.
NOTE: The face of the bypass valve retaining plug MUST be clearly painted with a high
quality, highly visible paint marker (preferably white or yellow) to signify that the new
bypass valve has been installed.
Action
In order to qualify for repair under this field action, an engine:
1. must be within Base Engine Warranty, the Emissions Coverage period and/or within a
CAP Coverage period, and
2. must be on the attached ESN list.
NOTE: The attached ESN list is provided in a sequential table. ESNs are listed from the
smallest to largest, in four (4) columns. It is recommended that the Excel Find function
be utilized to verify ESN eligibility. Select the entire table (upper left hand corner), press
the CTRL and F keys, key in your targeted ESN. If the ESN is eligible, the dialog box will
provide the location of the ESN (by column and row).
After verifying that the engine meets the above requirements, perform the following actions:
1. Remove lubricating oil filter bypass valve. Please refer to Service Manual (4022250 for
ISX15 CM2250, 2883557 for QSX15 CM2250 ECF, 2883561 for QSX11.9 CM2250 ECF
and 2883445 for ISX12 CM2250, 4310641 for ISX15 CM2350, 4310646 for ISX12
CM2350, 4332712 for QSX15 CM2350, 4310736 for ISX15 CM2250SN) and Procedure
007-014.
2. Install bypass valve, Part Number 4357177. Please refer to Service Manual (4022250 for
ISX15 CM2250, 2883557 for QSX15 CM2250 ECF, 2883561 for QSX11.9 CM2250 ECF
and 2883445 for ISX12 CM2250, 4310641 for ISX15 CM2350, 4310646 for ISX12
CM2350, 4332712 for QSX15 CM2350, 4310736 for ISX15 CM2250SN) and Procedure
007-014.
3. Paint the face of the bypass valve retaining plug with high quality, highly visible paint
marker (preferably white or yellow) to signify that the new bypass valve has been
installed and the retaining plug properly torqued.
Material Disposition
Materials removed as a result of this field action must be scrapped.
NOTE: After the repair is completed, the face of the bypass valve retaining plug MUST
https://qsol.cummins.com/qs3/pubsys2/xml/en/trp/2017/t1706.html
2/1/2016
ISX/QSX CM2250/CM2350 Lubricating Oil Filter Bypass Valve TRP
Page 3 of 4
be clearly painted with a high quality, highly visible paint marker (preferably white or
yellow) to signify that the new bypass valve has been installed.
Reimbursements
Parts
The following parts are covered under this field action:
Part Number
Quantity
Description
435717700
1
VLV,RLF
NOTE: Lubricating Oil Filter Bypass Valve - Remove and Install SRT is the only labor
that should be claimed to this TRP. All listed SRTs are OPTIONAL. Select ONLY the
appropriate SRT. All other warrantable charges associated with the repair can be
claimed to the coverage that provides the most benefit to the customer including Base
Engine Warranty, Emissions Control System Warranty or CAP Coverage (if applicable)
under the appropriate failure code.
Labor using applicable Access Code and Time:
SRT
Description
Code
07-01Y Lubricating Oil Filter Bypass Valve - Remove and Install - ISX15 CM2350
X101 (OPTIONAL)
07-01Z Lubricating Oil Filter Bypass Valve - Remove and Install - ISX15 CM2250
(OPTIONAL)
07-02J Lubricating Oil Filter Bypass Valve - Remove and Install - ISX15 CM2250
SN (OPTIONAL)
07-02K
Lubricating Oil Filter Bypass Valve - Remove and Install - QSX15
CM2350 X106 (OPTIONAL)
07-02L
Lubricating Oil Filter Bypass Valve - Remove and Install - QSX15
CM2350 X105 (OPTIONAL)
07-02N
Lubricating Oil Filter Bypass Valve - Remove and Install - QSX15
CM2250 ECF (OPTIONAL)
07-02P Lubricating Oil Filter Bypass Valve - Remove and Install - ISX12 CM2350
X102 (OPTIONAL)
07-02Q Lubricating Oil Filter Bypass Valve - Remove and Install - ISX12/ISX11.9
CM2250 (OPTIONAL)
07-02R
Lubricating Oil Filter Bypass Valve - Remove and Install - QSX11.9
CM2250 ECF (OPTIONAL)
Time
(hrs)
Travel
https://qsol.cummins.com/qs3/pubsys2/xml/en/trp/2017/t1706.html
2/1/2016
ISX/QSX CM2250/CM2350 Lubricating Oil Filter Bypass Valve TRP
Page 4 of 4
Travel is not covered under this field action. Towing is not covered under this field action.
Other Claimables
Consumables are not covered under this field action.
Claim Instructions
For Cummins Dealers, claims for this TRP must be filed via RAPIDSERVE™ Web
(rsw.cummins.com). For information regarding RAPIDSERVE™ Web, please reference the
"Warranty" tab in QuickServe® Online. If there are additional questions, please contact your
local Cummins Distributor.
Claim Codes
Description
Account Code:
Pay Code:
Pay Code:
Pay Code:
Failure Code:
Code
65
Distributor = X
Dealer = D
International = I
WLCVHB
Attachments
Click here to see t1706-e_esn-list.xls
Last Modified: 15-Jan-2016
Copyright © 2000-2010 Cummins Inc. All rights reserved.
https://qsol.cummins.com/qs3/pubsys2/xml/en/trp/2017/t1706.html
2/1/2016

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.