TSB100031-092116
Service Bulletin Details
Public Details for: TSB100031-092116
This technical servivce bulletin describes an issue where the malfunction indicator lamp (mil) will be illuminated with no fault codes present in the engine control module (ecm). The resolution for the issue is described.
- 9999 -
Models from 9999
9999 CUMMINS B6.7 |
9999 CUMMINS ISB6.7 |
9999 CUMMINS ISL9 |
9999 CUMMINS ISX12 |
9999 CUMMINS ISX15 |
Malfunction Indicator Lamp (MIL) Illuminated with No Fault Codes Present Page 1 of 2 Technical Service Bulletin Number TSB100031 Technical Service Bulletin Subject Malfunction Indicator Lamp (MIL) Illuminated with No Fault Codes Present Original Early Field Notification Number: e10031. Issue This document describes an issue where the malfunction indicator lamp (MIL) will be illuminated with no fault codes present in the engine control module (ECM). Verification Product Affected ISB6.7 CM2350 B101 B6.7 CM2350 B121B ISL9 CM2350 L101 ISX15 CM2250 ISX15 CM2350 X101 ISX12 CM2350 X102 The MIL will be illuminated with no fault codes present in the ECM. The use of the “Reset Inactive Faults” command in INSITE™ electronic service tool does not extinguish the MIL when it clears the fault codes from the ECM. Do not use the “Reset Inactive Faults” command in INSITE™ on On-Board Diagnostics products. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2010/tsb100031.html 10/3/2016 Malfunction Indicator Lamp (MIL) Illuminated with No Fault Codes Present Page 2 of 2 Resolution If the MIL is illuminated with no fault codes present in the ECM, a fault code will need to be created in order to use the “Reset All Faults” feature in INSITE™ electronic service tool. Follow these instructions: Turn the keyswitch to the OFF position. Disconnect the wiring harness from the coolant temperature sensor. Turn the keyswitch to the ON position. Use INSITE™ electronic service tool to monitor fault codes to see Fault Code 144 go active. Reconnect the wiring harness to the coolant temperature sensor. Use INSITE™ electronic service tool to monitor fault codes to see Fault Code 144 go inactive Use INSITE™ electronic service tool to perform the “Reset All Faults” function to clear the inactive Fault Code 144 and to extinguish the MIL. Warranty Statement The information in this document has no effect on present warranty coverage or repair practices, nor does it authorize TRP or Campaign actions. Document History Date 2013-2-14 2016-9-21 Details Adding 2013 Product to existing TSB. Added B6.7 CM2350 B121B. Last Modified: 23-Sep-2016 Copyright © 2000-2010 Cummins Inc. All rights reserved. https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2010/tsb100031.html 10/3/2016