C1598
Service Bulletin Details
Public Details for: C1598
This campaign addresses casting porosity on the variable geometry turbocharger (vgt) actuator on certain engines.
- 9999 -
Models from 9999
9999 CUMMINS ISB4.5 |
ISB4.5 CM2350 B104 - Variable Geometry Turbocharger Actuator Casting Porosity Cam... Page 1 of 4 Campaign Number Revision Level C1598 Date Group Number 16-JAN-2015 Expiration Date (U.S. and Canada) Expiration Date (International) 01-APR-2016 01-APR-2016 Engine Family Fuel System Plant Build Date From To Warranty Campaign ISB4.5 CM2350 B104 - Variable Geometry Turbocharger Actuator Casting Porosity Campaign Attention • Worldwide distr./ branches and Div./Reg Offices If additional information is required, contact your Cummins Warranty Operations Group Leader. Description This Campaign is being issued to address a casting porosity concern within the VGT actuator of the ISB4.5 CM2350 B104 engine. The Campaign requires the technician to replace ONLY the VGT actuator on selected engines. An actuator kit has been released specifically for this campaign, along with a service procedure to cover the work requirements. https://qsol2.cummins.com/qs3/pubsys2/xml/en/campaign/2015/c1598.html 2/2/2015 ISB4.5 CM2350 B104 - Variable Geometry Turbocharger Actuator Casting Porosity Cam... Page 2 of 4 NOTE: Should the actuator calibration process not complete successfully, the technician will need to replace the entire turbocharger. Please refer to the attached work instruction for details on this aspect of the Campaign. Action In order to qualify for repair under this field action, an engine: 1. will be covered In the Base Engine Warranty period, and 2. must be on the attached ESN list. After verifying that the engine meets the above requirements, perform the following actions: Please refer to Attachment B for work instructions needed to carry out this Campaign. Material Disposition Materials removed as a result of this field action must be scrapped. Reimbursements Parts NOTE: Where only the VGT Actuator is required, Kit number 4034163 should be used for both Truck or Bus applications. Where the entire Turbocharger is required, ensure to select the correct Turbocharger. Use part number 4309504 for all Truck applications, and use 4309505 for all Bus applications. The following parts are covered under this field action: Part Number Quantity Description 403416300 1 KIT,ACT 430950400 1 KIT,TUR (OPTIONAL) 430950500 1 KIT,TUR (OPTIONAL) NOTE: SRTs to gain access that are required to complete the repair, that are sufficiently explained in the claim narrative, may also be claimed on this action. NOTE: This Campaign authorizes the replacement of the turbocharger actuator. In some cases (where the calibration fails) this Campaign will also authorize the replacement of the entire turbocharger. The Labor should be claimed as follows: Scenario A) Where only the actuator replacement is carried out, use the following SRTs: 00-901-00 - Administrative time 00-117-00 - Perform Job Safety Assessment (JSA) 10-144-00 - Charge Air Pipe - remove and install, each 11-074-00 - Exhaust https://qsol2.cummins.com/qs3/pubsys2/xml/en/campaign/2015/c1598.html 2/2/2015 ISB4.5 CM2350 B104 - Variable Geometry Turbocharger Actuator Casting Porosity Cam... Page 3 of 4 Outlet Connection - remove and install 10-014-00 - Turbocharger Oil Supply Hose remove and install 10-021-00 - Actuator - Variable Geometry Turbocharger Electric remove and install. Scenario B) Where the entire turbocharger is replaced, the following ADDITIONAL SRTs may also be claimed: 10-020-00 - Variable Geometry Turbocharger - remove and install 13-004-00 - Starting Motor - remove and install (Required to allow clearance to remove the turbocharger). Labor using applicable Access Code and Time: SRT Code 00-90X 10-014 10-020 10-021 10-144 11-074 13-004 Time (hrs) Description Administrative time Turbocharger Oil Supply Hose - Remove and Install, (Common Rail Fuel System) VARIABLE GEOMETRY TURBO - REMOVE AND INSTALL (WITH EGR) (OPTIONAL) Actuator - Variable Geometry Turbocharger Electric - Remove and Install Charge Air Pipe - Remove and Install, Each Exhaust Outlet Connection-Remove and Install STARTING MOTOR - REMOVE AND INSTALL, ONE (COMMON RAIL FUEL SYSTEM) (OPTIONAL) Travel Travel is covered under this field action. Towing is not covered under this field action. NOTE: When filing claims for multiple ESNs, where travel is required, travel can be filed to ONLY one (1) ESN. Other Claimables Consumables are not covered under this field action. Claim Instructions For Cummins Dealers, claims for this Field Campaign must be filed via RAPIDSERVE™ Web (rsw.cummins.com). For information regarding RAPIDSERVE™ Web, please reference the "Warranty" tab in QuickServe® Online. If there are additional questions, please contact your local Cummins Distributor. Claim Codes Description Account Code: Code 65 https://qsol2.cummins.com/qs3/pubsys2/xml/en/campaign/2015/c1598.html 2/2/2015 ISB4.5 CM2350 B104 - Variable Geometry Turbocharger Actuator Casting Porosity Cam... Page 4 of 4 Claim Codes Description Pay Code: Pay Code: Pay Code: Failure Code: Code Distributor = X Dealer = D International = I WTHACB Attachments Click here to see c1598_esn-list.xls Click here to see c1598_isb4.5_cm2350_b104_turbocharger_actuator_replacement_procedureattach-b.pdf Last Modified: 16-Jan-2015 Copyright © 2000-2010 Cummins Inc. All rights reserved. https://qsol2.cummins.com/qs3/pubsys2/xml/en/campaign/2015/c1598.html 2/2/2015 § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § § §