TT225

Volume 225 - November, 2016
1970 Colt Galant GTO
REPROGRAMMING SYSTEM
IDENTIFICATION CHART — All models.
Proper cable selection is required in order to
reprogram a vehicle correctly. Refer to the chart
on page 6 in this Tech Talk for proper cable
selection for each vehicle. This chart can also be
found on MDL under service -> service tech
resources -> Service Related Items -> Worksheets,
Questionnaires, Job Aids, under Job Aids.
Vehicle Technical Info................. page 1
Training News............................. page 7
Techline Information................... page 8
MEDIC Information.................... page 8
Bulletin Review............................ page 8
CAN Cable
mark indicates an article is being
NOTE: The
repeated from a previous issue of Tech Talk due
to the subject's importance.
Blue End
TT
K−Line Cable
GROUP 00 − General
FAX NUMBERS DISCONTINUED FOR
TECHLINE, VIN LABEL REQUEST FORMS —
All models.
Due to system improvements at MMNA, certain
fax numbers are being discontinued as of
November 7, 2016. The previous Techline fax
number (714-934-4279 ), and the former fax
number on the VIN Plate/Label request form
and FMVSS label request form for SR-04-005
(714-934-4202 ) will no longer receive faxes.
DIFFICULTY REGISTERING
REMOTES — 2017 Outlander.
For Techline, technicians are asked to scan or
photograph any hand-printed documents, save
as a pdf or jpg file, and attach to the Techline case,
or email files to: [email protected]. Be
sure to include the Techline case number in the
subject line of the email.
Some technicians have reported difficulty in
registering the non-FAST remotes on 2017
Outlander vehicles. In these cases, try the
following steps, using MUT-III SE, after
reprogramming the Immobilizer.
For all VIN label requests, technicians can scan
and email files to: [email protected],
or mail all relevant documents to:
Technical Compliance
Mitsubishi Motors North America, Inc.
P.O. Box 6400
Cypress, CA 90630-6400
1
TT
GROUP 42A − Keyless Entry System
NON-FAST
1. On the System Select menu, select
“F.A.S.T./IMMO/Keyless” from the System
List menu. Under Vehicle Information, select
appropriate class. If VIN does not populate,
or does not match the current vehicle, click on
the car icon.
5. REMOVE the non-FAST key from the
ignition.
IMPORTANT: Key MUST be removed
from the ignition cylinder to program the
remote keyless entry (RKE) function.
6. With the non-FAST remote removed from
ignition, press and hold the LOCK and
UNLOCK buttons for 1-1.5 seconds, release
both, then press and release UNLOCK.
2. From the F.A.S.T./IMMO/Keyless menu,
select Special Function.
LOCK
UNLOCK
3. From the Special Function menu, select
“Keyless ID Reg.” to register the transmitter
(RKE) portion of the key (key and transmitter
are one unit).
7. Confirm the scan tool shows one remote
registered.
8. Repeat steps 6 and 7 to register additional
non-FAST remotes. After all transmitters are
registered, click the check mark to complete
registration.
4. Input password and click the check mark at
the bottom of the page.
2
NG: Seat Belt Inside Both Adjustment Levers
9. Click the check mark in the pop-up window
to end registration mode.
OK: Seat Belt Outside Adjustment Levers
TT
GROUP 54A − Chassis Electrical
10. Operate all remotes to verify proper operation
and confirm all doors LOCK and UNLOCK
with the newly registered remotes.
TT
GROUP 52A − Interior
FRONT SEAT BELTS FRAYED ON EDGES —
2013-15 Outlander Sport/RVR.
Should you encounter a front seat belt that has
been frayed or damaged along the edges, inspect
to see if the area of damage aligns with
adjustment levers on the side of the seat when
the seat belt is in use. If the damaged area is near
an adjustment lever, please ensure the seat belt is
not being placed inside an adjustment lever as
this is not the proper position for the seat belt and
can cause the seat belt to become frayed.
SOFTWARE UPDATES AVAILABLE FOR
HANDS-FREE/BLUETOOTH ISSUES — All
applicable models.
Dealers are reminded to check MDL for TSBs
with the latest software to address issues with
the FUSE Hands Free Link System. The software
addresses issues with Bluetooth connection,
Apple products, and USB devices. The latest
software contains all available countermeasures
and is the only one that should be installed.
For more detail and instructions, refer to the
TSBs below:


TSB-16-54-001: FUSE Hands Free Link
System: Unstable Bluetooth Connection
TSB-15-54-001: Hands Free Module
Software Update for “Phonebook Is Empty”
Message
RIGHT HAND TAILLIGHT AND FRONT
MARKER LIGHTS NOT ILLUMINATED —
2011 and newer Outlander Sport/RVR.
NG: Seat Belt Inside One Adjustment Lever
If diagnosing both the RH taillight and RH front
marker light (part of the headlight assembly) for
a “not illuminated” condition, but the left side
lamps are working, consider inspecting the
glove box illumination bulb for a short to
ground. This circuit also affects the RH Daytime
Running Light (DRL) for 2015 Outlander
Sport/RVR.
3
necessary programming fixes for this
Service Campaign.
 If a vehicle has both SC-15-003 and
SR-16-006 open, and the customer does not
inform the dealer that they had experienced
a shudder or surge condition, complete
SR-16-006 only.
 If a vehicle has both SC-15-003 and
SR-16-006 open, and in the rare case that the
customer informs the dealer that they had
experienced a shudder or surge condition,
complete
SR-16-006,
then
follow
SC-15-003's procedure for shudder/surge
condition.
The revised Service Campaign bulletin will be
available today on MEDIC and MDL.
CALIBRATION
OF
MULTI
AROUND
MONITOR (MULTI-VIEW CAMERA) SYSTEM
— 2017 Outlander.
After performing any of the following actions,
camera calibration must be completed.
Calibration is performed using MUT-III SE and
two calibration targets (MB993003).
 Replacement of the Camera-ECU.
 Removal and installation/replacement of
one of the four cameras.
 Left front door, right front door or the
liftgate is aligned.
 Front bumper center cover is deformed or
loosened due to collision.
The calibration targets are available to
dealerships under the Special Service Tool
Loaner Program.
Complete the Loaner
Agreement* on MDL and email to
and
[email protected]
[email protected] .
When checking for applicability of SC-15-003
(C1512Z) and SR-16-006 (C1606Z), please check
for and complete any other open campaigns.
Always get the customer's approval before
completing a campaign on a customer owned
vehicle.”
* The Loaner Agreement can be found on MDL, under
service -> service tech resources -> Special Service
Tool Loaner Program.
IMPORTANT
TT
To maximize customer satisfaction with the quality
of their vehicle, affected new or used inventory
vehicles should be remedied before the vehicle is
delivered. Dealers must check their inventory
vehicles' VINs on the Warranty Superscreen to
verify whether the vehicle is involved in this
service campaign.
GROUP 60 − Recalls
TIN-15-SC-003-B: BULLETIN REVISION POTENTIAL TRANSMISSION SHUDDER /
SURGE SERVICE CAMPAIGN — Certain 2015
Outlander Sport Equipped with 2.0L Engine and
CVT-8 Automatic Transaxle.
IMPORTANT
TIN-15-SC-003-B was released recently and
states:
Affected new or used inventory vehicles must be
repaired before the vehicle is delivered. Dealers
must check their inventory vehicles' VINs on the
Warranty Superscreen to verify whether the vehicle
is involved in a recall campaign. It is a violation of
Federal law for a dealer to deliver a new motor
vehicle or any new or used item of motor vehicle
equipment (including a tire) covered by the
notification under a sale or lease until the defect or
noncompliance is remedied.
“A revised Service Campaign bulletin will be
released today to address vehicles covered by
SC-15-003
“Potential
Transmission
Shudder/Surge – Service Campaign” and
SR-16-006 “CVT Hesitation – Safety Recall
Campaign” in certain 2015 Outlander Sport
vehicles.
The revised service campaign bulletin includes
the following instructions that dealers need to
follow when encountering a vehicle included in
both SC-15-003 and SR-16-006:

TIN-15-SC-004-B: BULLETIN REVISION POTENTIAL TRANSMISSION SHUDDER /
SURGE SERVICE CAMPAIGN — Certain 2016
Outlander Equipped with 2.4L Engine and CVT-8
Automatic Transaxle.
If the CVT-ECU was previously
reprogrammed as part of SR-16-006 “CVT
Hesitation - Safety Recall Campaign” and
the customer did not inform the dealer that
they had experienced a shudder or surge
condition,
this
Service
Campaign
(SC-15-003) does not apply. The CVT-ECU
reprogram for SR-16-006 includes all the
TIN-15-SC-004-B was released recently and
states:
“A revised Service Campaign bulletin will be
released today to address vehicles covered by
SC-15-004
“Potential
Transmission
4
Shudder/Surge – Service Campaign” and
SR-16-006 “CVT Hesitation – Safety Recall
Campaign” in certain 2016 Outlander vehicles.
The revised service campaign bulletin includes
the following instructions that dealers need to
follow when encountering a vehicle included in
both SC-15-004 and SR-16-006:
 If the CVT-ECU was previously
reprogrammed as part of SR-16-006 “CVT
Hesitation - Safety Recall Campaign” and
the customer did not inform the dealer that
they had experienced a shudder or surge
condition,
this
Service
Campaign
(SC-15-004) does not apply. The CVT-ECU
reprogram for SR-16-006 includes all the
necessary programming fixes for this
Service Campaign.
 If a vehicle has both SC-15-004 and
SR-16-006 open, and the customer does not
inform the dealer that they had experienced
a shudder or surge condition, complete
SR-16-006 only.
 If a vehicle has both SC-15-004 and
SR-16-006 open, and in the rare case that the
customer informs the dealer that they had
experienced a shudder or surge condition,
complete
SR-16-006,
then
follow
SC-15-004's procedure for shudder/surge
condition.
The revised Service Campaign bulletin will be
available today on MEDIC and MDL.
When checking for applicability of SC-15-004
(C1513R) and SR-16-006 (C1607Z), please check
for and complete any other open campaigns.
Always get the customer's approval before
completing a campaign on a customer owned
vehicle.”
IMPORTANT
Affected new or used inventory vehicles must be
repaired before the vehicle is delivered. Dealers
must check their inventory vehicles' VINs on the
Warranty Superscreen to verify whether the vehicle
is involved in a recall campaign. It is a violation of
Federal law for a dealer to deliver a new motor
vehicle or any new or used item of motor vehicle
equipment (including a tire) covered by the
notification under a sale or lease until the defect or
noncompliance is remedied.
TT
GROUP 66 − Accessories

SHIFT LEVER BINDING: ACCESSORY
SHIFT
GATE
LED
INSTALLATION
(MZ360248EX) — 2014-17 Outlander.
NOTE: This article is being reprinted to add 2015-17
model year Outlander vehicles.
When removing the CVT or A/T shift indicator
panel for LED installation, it is possible to
dislodge the shifter dust shield slide from its run
channel. As a result, the slider will contact other
shifter components when the transmission is
shifted from park (P), reverse (R) or neutral (N)
to drive (D) and be dislodged from its run
channels. Significant damage to the shifter dust
shield will result and the shifter assembly must
be replaced.
Shift
Indicator
Panel
Run
Channels
Dust
Shield
IMPORTANT
To maximize customer satisfaction with the quality
of their vehicle, affected new or used inventory
vehicles should be remedied before the vehicle is
delivered. Dealers must check their inventory
vehicles' VINs on the Warranty Superscreen to
verify whether the vehicle is involved in this
service campaign.
Dust
Shield
To reduce the possibility of damaging the dust
shield, set the parking brake and move the shift
lever to the N position prior to removing the shift
indicator panel. Make sure the wheels are
chocked to prevent the vehicle moving.
If the dust shield is dislodged from its run
channel during LED light kit installation,
reinstall it, then, confirm free movement of the
shield when shifting to D, prior to reassembly.
TT
5
Reprogramming System Identification Chart
Engine or
Transmission
Model
Diamante
1998
1999
2000
2001
Eclipse
2003
2004
2005
2006
2007
2008
2.4L SOHC
K-Line
ELC‐4AT
K-Line
3.0L SOHC
K-Line
ELC‐4AT
K-Line
2.4L SOHC MIVEC
K-Line
ELC‐4AT
K-Line
3.8L SOHC
K-Line
2.0L DOHC T/C
K-Line
ELC‐4AT
K-Line
3.0L SOHC
K-Line
ELC‐4AT
K-Line
2.4L SOHC
K-Line
ELC‐4AT
K-Line
CAN
ELC‐4AT
CAN
3.8L SOHC
CAN
K-Line
ELC‐4AT
K-Line
2.0L T/C
K-Line
ELC‐4AT
K-Line
3.0L SOHC
K-Line
ELC‐4AT
K-Line
2.4L SOHC
K-Line
ELC‐4AT
K-Line
2.4L SOHC MIVEC
CAN
ELC‐4AT
CAN
3.8L SOHC
CAN
Lancer Sportback (2010‐ )
3.8L SOHC
K-Line
CAN
ELC‐4AT
K-Line
CAN
Mirage (2014‐ )
Mirage G4 (2017)
Montero
CAN
K-Line
2.0L SOHC
K-Line
ELC‐4AT
K-Line
2.0L DOHC
CAN
CVT
CAN
2.4L DOHC MIVEC
CAN
CAN
2.4L SOHC MIVEC
K-Line
ELC‐4AT
K-Line
CAN
2.0L DOHC
CAN
1.8L SOHC
K-Line
ELC‐4AT
K-Line
1.5L SOHC
K-Line
ELC‐4AT
K-Line
CAN
1.2L‐DOHC
CAN
1.2L‐DOHC
K-Line*
3.8L SOHC
K-Line*
3.5L SOHC
K-Line
ELC‐4AT
K-Line
K-Line*
K-Line*
K-Line K-Line*
K-Line
3.5L SOHC
K-Line
ELC‐4AT
K-Line
3.0L SOHC
K-Line
ELC‐4AT
Outlander (2007 ‐13)
2.4L SOHC
K-Line
ELC‐4AT
K-Line
2.4L SOHC
K-Line*
ELC‐CVT
K-Line*
2.4L SOHC MIVEC
K-Line*
ELC‐4AT
K-Line*
CAN
2.4L DOHC
CAN
CVT
Outlander (2014‐ )
CAN
K-Line
2.4L SOHC MIVEC
ELC‐5AT
Outlander ( ‐2006)
2017
K-Line
2.0L DOHC T/C
ELC‐5AT
Montero Sport
2016
CAN
EV‐ECU
2.0L DOHC T/C MIVEC
Mirage ( ‐2002)
2015
CAN
2.0L DOHC T/C MIVEC
Lancer Sportback (2004)
2014
CAN
K-Line
ELC‐4AT
Lancer (2008‐ )
2013
CAN
2.4L
2.0L DOHC T/C MIVEC
Lancer ( ‐2007)
2012
CAN
2.4L SOHC MIVEC
ELC‐4AT
i‐MiEV
Lancer Evolution
2011
CAN
ELC‐5AT
Endeavor
2010
CAN
ELC‐5AT
Eclipse Spyder
2009
K-Line
ELC‐4AT
Galant
2002
K-Line
3.5L SOHC
3.0L SOHC
CAN
ELC‐6AT
CAN
2.4L DOHC
CAN
CVT
CAN
3.0L SOHC
CAN
CAN
ELC‐6AT
CAN
Outlander Sport
2.4L SOHC MIVEC
3000GT
3.0L SOHC
K-Line
ELC‐4AT
K-Line
3.0L DOHC
K-Line
ELC‐4AT
K-Line
3.0L T/C
K-Line
ELC‐4AT
K-Line
CAN
CVT
CAN Cable
K-Line Cable
Blue End
© 2016 Mitsubishi Motors North America, Inc.
* Requires additional Adapter Harness MB991855.
6
Technical Training Schedule
December 2016 − January 2017
Always check MDL for schedule updates. Since Mobile Training does not appear on the calendars below,
contact your District Parts & Service Manager for information about Mobile Training in your area.
EASTERN ZONE
New Jersey Technical Training Center
Atlanta Technical Training Center
WESTERN ZONE
California Technical Training Center
Dallas Technical Training Center
TT
7
TECHLINE
HOURS OF OPERATION:
Monday — Friday 6:30 am - 3:30 pm
Pacific Time
Techline is closed every THURSDAY
9:30 - 10:30 A.M for a staff meeting.
(800) 446-6064
TT
HOURS OF OPERATION:
Monday — Friday 7:00 am - 4:00 pm
Pacific Time
MEDIC Hotline will assist with MEDIC &
Scan Tool hardware or software issues.
MEDIC Hotline (800) 846-7575
TT
Since Tech Talk 224, the following
bulletins have been released.
2016 Technical Service Bulletins, Safety Recalls, & Service Campaigns
Date Posted
Publication Number
Publication Title
Applicable Models
10/17/2016
TSB-16-42A-001
Improper Door Glass Function
2013-15 Outlander Sport/RVR
10/17/2016
TSB-16-54-005
Unable to Re-register Immobilizer ID After
Replacing ETACS ECU
2014-16 Outlander
10/26/2016
SC-15-003REV
Potential Transmission Shudder/Surge - Service
Campaign - Revised
2015 Outlander Sport/RVR
10/26/2016
SC-15-004REV
Potential Transmission Shudder/Surge - Service
Campaign - Revised
2016 Outlander
11/8/2016
TSB-16-51-003
Tailgate Garnish Contacting Rear Combination Lamps
2014-15 Outlander
11/10/2016
TSB-16-35-001
Hydraulic Unit Removal & Installation: Clamping
Torque of Brake Tube Flare Nuts - SMR
2014-16 Outlander, 2014-17
Outlander Sport/RVR
11/21/2016
TSB-16-11-003
Oil Leakage from Front Oil Seal of Crankshaft
2008-11 Lancer,/Sportback/Ralliart,
models, Lancer Evolution, Outlander
TT
Since Tech Talk 224, the following
TINs/ATINs have been released.
2016 Technical Information Notices, Advance Technical Information Notices
Date Posted
Publication Number
Publication Title
Applicable Models
10/26/2016
TIN-15-SC-003-B
Potential Transmission Shudder/Surge Service Campaign - Revised
2015 Outlander Sport/RVR
10/26/2016
TIN-15-SC-004-B
Potential Transmission Shudder/Surge Service Campaign - Revised
2016 Outlander
TT
 2016 Mitsubishi Motors North America, Inc.
The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi Dealer Link,
MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
8