NTB16-078A
Service Bulletin Details
Public Details for: NTB16-078A
"voluntary service campaign 2016 titan xd; dual wall bedliner and cargo tie down kit this bulletin has been amended. The parts information section has been revised. No other changes have been made. Please discard previous versions of th
- 2016 -
Models from 2016
2016 NISSAN TITAN |
Reference: Date: NTB16-078a September 6, 2016 VOLUNTARY SERVICE CAMPAIGN 2016 TITAN XD; DUAL WALL BEDLINER AND CARGO TIE DOWN KIT This bulletin has been amended. The PARTS INFORMATION section has been revised. No other changes have been made. Please discard previous versions of this bulletin. CAMPAIGN ID #: PC423 APPLIED VEHICLES: 2016 Titan XD (A61) Check Service COMM to confirm campaign eligibility. INTRODUCTION Nissan is conducting this voluntary service campaign on certain specific 2016 Titan XD vehicles to install a dual wall bedliner and a cargo tie down kit that should have been installed on the vehicle from the factory, but were not. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PC423 to this campaign. This number must appear on all communications and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a dealer’s inventory. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/11 SERVICE PROCEDURE 1. Apply the parking brake. 2. Install the dual wall bedliner using the accessory installation instructions starting on page 3. Order required parts using the Parts Information below. 3. Install the cargo tie down kit using the accessory installation instructions starting on page 7. Order required parts using the Parts Information below. PARTS INFORMATION DESCRIPTION PART NUMBER QUANTITY TITAN BOX 6.5 SIDE WALL RH - TPO KIT (Storage Box) 999T1-W3781 (1) 1 TITAN BOX 6.5 SIDE WALL LH - TPO KIT (Storage Box) 999T1-W3782 (1) 1 Cleat – Cargo Tie Down Kit 999T7-W3800 (2) 1 (1) Order the Titan Box from OE Liner™/Penda at 800-635-4637. (2) Order the Cargo Tie Down Kit from your local PDC. 2/11 NTB16-078a Dual Wall Bedliner Order parts using the Parts Information on page 2. 1 of 4 3/11 NTB16-078a Dual Wall Bedliner – continued 2 of 4 4/11 NTB16-078a Dual Wall Bedliner – continued 3 of 4 5/11 NTB16-078a Dual Wall Bedliner – continued 4 of 4 6/11 NTB16-078a Cargo Tie Down Kit Order parts using the Parts Information on page 2. These part numbers are for installation instruction reference only. 1 of 4 7/11 NTB16-078a Cargo Tie Down Kit – continued 2 of 4 8/11 NTB16-078a Cargo Tie Down Kit – continued 3 of 4 9/11 NTB16-078a Cargo Tie Down Kit – continued 4 of 4 10/11 NTB16-078a CLAIMS INFORMATION Submit a Campaign (CM) line claim using the following claims coding: CAMPAIGN (CM) I.D. # DESCRIPTION OP CODE FRT PC423 Install Dual Wall Bed Liner (Storage Box) and Cargo Tie Down Kit PC4230 0.8 hrs. 11/11 NTB16-078a