A19167220431422
Service Bulletin Details
Public Details for: A19167220431422
This technical service bulletin instructs the reader to replace the auxiliary coolant pump if certain dtcs are stored.
- 2016 - 2015 - 2014 - 2013 - 2012 -
Technical Service Bulletin 19 MIL on; DTC related to coolant pump is stored in ECM (P261A00, P261B00, P261C00) 19 16 72 2043142/2 July 13, 2016. Supersedes Technical Service Bulletin Group 19 number 16-66 dated January 27, 2016 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A4, A5, A5 Cabriolet, Q5 2012 - 2016 All 2.0TFSI Condition REVISION HISTORY Revision Date Purpose 2 - Revised Warranty (Updated service number, claim type, and labor op) 1 1/27/2016 Initial publication • MIL sporadically on. • One or more of the following DTCs is stored in the engine control module (ECM), J623 (address word 01): • DTC P261A00 (Coolant Pump “B” Control Circuit/Open) • DTC P261B00 (Coolant Pump “B” Control Circuit Range/Performance) • DTC P261C00 (Coolant Pump “B” Control Circuit Low) Technical Background The continued coolant circulation pump sporadically fails. Production Solution Not applicable. Service 1. Confirm that one or more of the DTCs listed in the Condition are stored. 2. Replace the auxiliary coolant pump (part number 059121012B) with the updated part (part number 06D121601). Use the bracket with part number 06H121079N. © 2016 Audi of America, Inc. Page 1 of 2 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Warranty Claim Type: • 110 up to 48/50 • G10 for CPO covered vehicles - verify owner • If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 1947 Damage Code: 0040 Labor Operations: Additional coolant pump remove+reinstall 1947 1913 70 TU Diagnostic Time: GFF 0150 0000 Time stated on diagnostic protocol (Max 30 TU) Road test prior to service procedure No allowance 0 TU Road test after service procedure No allowance 0 TU Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2043142/2 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools Part Number Part Description Quantity 06D121601 Additional water pump 1 06H121079N Bracket for additional water pump 1 Additional Information All parts and service references provided in this TSB (2043142) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. © 2016 Audi of America, Inc. Page 2 of 2 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.