A70165420447632
Service Bulletin Details
Public Details for: A70165420447632
This technical service bulletin provides instructions for covering the trim of the head-up display to reduce a rattling noise.
- 2016 - 2015 - 2014 - 2013 - 2012 - 2011 -
Models from 2016
| 2016 AUDI A6 |
| 2016 AUDI A7 |
Models from 2015
| 2015 AUDI A6 |
| 2015 AUDI A7 |
Models from 2014
| 2014 AUDI A6 |
| 2014 AUDI A7 |
Models from 2013
| 2013 AUDI A6 |
| 2013 AUDI A7 |
Models from 2012
| 2012 AUDI A6 |
| 2012 AUDI A7 |
Models from 2011
| 2011 AUDI A6 |
| 2011 AUDI A7 |
Technical Service Bulletin 70 Rattle noise in left front dash from head-up display 70 16 54 2044763/2 July 19, 2016. Supersedes Technical Service Bulletin Group 70 number 16-53 dated July 7, 2016 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A6, A7 2011 - 2016 All Not Applicable Condition REVISION HISTORY Revision Date Purpose 2 - Revised Warranty (Updated Service Number and labor operation) 1 7/7/2016 Initial publication When the vehicle is driven over poor road surfaces, creaking or rattling noises can be heard from the upper dash panel on the driver’s side. Technical Background The upper and lower head-up display trim pieces are making contact, which causes the noise. Production Solution Not applicable. Service Cover the trim of the head-up display with textile tape (part number D 373125A2), as shown (Figure 1). Ensure that the tape completely covers the edge of the trim. Figure 1. Placement of textile tape. © 2016 Audi of America, Inc. Page 1 of 2 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Warranty Claim Type: • 110 up to 48/50 • If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 7018 Damage Code: 0020 Labor Operations: Instrument panel trim remove+reinstall 7018 9999 30 TU Road test prior to service procedure 0121 0002 10 TU Road test after service procedure 0121 0004 10 TU Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2044763/2 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools Part Number Part Description Quantity D 373125A2 Textile adhesive tape 0.1 Additional Information All parts and service references provided in this TSB (2044763) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. © 2016 Audi of America, Inc. Page 2 of 2 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.