A46163620386473
Service Bulletin Details
Public Details for: A46163620386473
This bulletin explains how to replace front brake pads, discs, and sensor to resolve a noise concern.
Models from 2014
2014 AUDI A8 |
2014 AUDI S8 |
Models from 2013
2013 AUDI A8 |
2013 AUDI S8 |
Technical Service Bulletin 46 3.0T & 3.0TDI Brake noise (PR-1LL) 46 16 36 2038647/3 May 10, 2016. Supersedes Technical Service Bulletin Group 46 number 16-35 dated April 25, 2016 for reasons listed below. Model(s) Year VIN Range A8 2013 - 2014 All Vehicle-Specific Equipment Condition REVISION HISTORY Revision Date Purpose 3 - Revised Required Parts and Tools (Updated part numbers) 2 04/25/2016 Revised Required Parts and Tools (Updated part numbers) 1 10/20/2014 Initial publication Customer may report hearing brake squeal when the vehicle comes to a stop at slow speeds. In some cases, the noise may be intermittent and difficult to reproduce. Technical Background Not applicable. Production Solution Improved front brake pads and discs. Service 1. Road test to verify concern. 2. Replace front brake pads, discs, and sensors (using the part numbers listed in this TSB) according to the instructions in Elsa at: Repair manual >> Chassis >> 46 Mechanical Components >> Front Brakes >> Brake Rotor, Removing and Installing >> Brake Rotor, Removing and Installing Steel Brakes 1LL/1LJ and 1LN/1LX. © 2016 Audi of America, Inc. Page 1 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin 3. Embed the brakes: A. Use medium pedal pressure to slow the car from approximately 35 mph to 10 mph. Repeat this process ten times. B. Next, drive for approximately 5 minutes at maximum allowable speeds, without braking, to allow the brakes to cool down. C. Repeat steps A and B if necessary. Note: Do not perform ABS stops as a way of embedding the brakes. Brake pads and discs may be permanently damaged if brakes are overheated prior to being properly embedded. © 2016 Audi of America, Inc. Page 2 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Warranty Claim Type: Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 4617 Damage Code: 0020 Labor Operations: 2 wheels removed + reinstalled 4405 2000 20 TU 2 front brake discs remove + reinstall 4650 2050 50 TU 2 brake pads, front remove + reinstall 4636 2050 70 TU GFF No allowance 0 TU Road test prior to service procedure 0121 0002 10 TU Road test after service procedure 0121 0004 10 TU Diagnostic Time: Technical diagnosis at dealer’ s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2038647/3 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools Part Number Part Description Quantity 4G0615301K Front brake disc 2 4G0698151M Front brake pads 1 set 4G0615121D Front brake wear indicators 2 N 91147601 Caliper bolts (M14X1,5X48) 4 © 2016 Audi of America, Inc. Page 3 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Additional Information All parts and service references provided in this TSB (2038647) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. © 2016 Audi of America, Inc. Page 4 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.