A40165520243184

Service Bulletin Details

Public Details for: A40165520243184

This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).


- 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 -

Models from 2007
2007 AUDI A8
Models from 2006
2006 AUDI A8
Models from 2005
2005 AUDI A8
Models from 2004
2004 AUDI A8
Models from 2003
2003 AUDI A8
Technical Service Bulletin
Audi
40 Clicking noise from wheel bearing
40 16 55 2024318/4 June 30, 2016. Supersedes Technical Service Bulletin Group 40 number 12-27 dated
November 8, 2012 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A4
2008 - 2016
All
Not Applicable
A5
2008 - 2017
All
Not Applicable
A5 Cabriolet
2009 - 2017
All
Not Applicable
A6
2005 - 2017
All
Not Applicable
A7
2011 -2017
All
Not Applicable
AS
2003 - 2017
All
Not Applicable
Q5
2009 - 2017
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
4
-
Revised header data (Added models, model years, and removed VIN breaks)
Revised Warranty (Completely revised)
3
11/8/2012
Revised header data
2
9/26/2012
Revised Service (Updated repair instructions)
Clicking or clacking noise when maneuvering or parking.
Technical Background
Microscopic movements between the wheel bearing and wheel bearing housing may cause the noise. (Front left
and/or front right bearing can be affected.)
Production Solution
Not applicable.
Page 1 of 3
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Audi
Service
1.
On the affected side(s), remove any corrosion and dirt from the wheel bearing housing and the wheel bearing.
2.
Using a brush, apply a thin coat of paste (part number G
052109A2) on the wheel bearing housing as shown
(Figure 1). Make sure not to apply any paste on the
threads.
Figure 1. Area to apply paste.
[I) Tip: Wheel bearings replaced for this concern will not be reimbursed under warranty.
Page 2 of 3
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Audi
Warranty
Claim Type:
•
•
•
110 up to 48/50
G10 for CPO covered vehicles - verify owner
If vehicle is outside any warranty, this Technical Service Bulletin is informational only .
Service Number:
4057
Damage Code:
0010
Labor Operations:
Wheel hub with bearing remove+reinstall -or-
4067 19XX
2 Wheel hub with bearing remove+reinstall
4067 20XX
Modify wheel bearing(s)
4057 4999
10 TU
GFF
No allowance
0TU
Road test prior to service procedure
0121 0002
10 TU
Road test after service procedure
0121 0004
10 TU
Diagnostic Time:
See Elsa
Technical diagnosis at dealer's discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2024318/4
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Part Number
Part Description
Quantity
G 052109A2
Assembly paste
1
Additional Information
All parts and service references provided in this TSB (2024318) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
Page 3 of 3
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.