A17167220381196

Service Bulletin Details

Public Details for: A17167220381196

This technical service bulletin instructs the reader to test for and replace a defective oil level sensor.


- 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 -

Technical Service Bulletin
Audi
17 "Oil minimum warning, add one quart of oil" message appears, but oil level is above minimum
17 16 72 2038119/6 April 26, 2016. Supersedes Technical Service Bulletin Group 17 number 16-71 dated April 20,
2016 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A4
2011 - 2018
All
3.0T engine
A5
2013 - 2018
All
3.0T engine
A5 Cabriolet
2011 - 2018
All
3.0T engine
A6
2012 - 2015
All
3.0T engine
A7
2012 - 2015
All
3.0T engine
AS
2013 - 2015
All
3.0T engine
Q5
2013 - 2017
All
3.0T engine
Q7
2011 -2016
All
3.0T engine
Condition
REVISION HISTORY
Revision
Date
Purpose
6
-
Revised header data (Added engines)
5
4/20/2016
Revised header data (Added engines)
4
3/7/2016
Revised header data (Added model years)
•
The message "Oil minimum warning, add one quart of oil" appears in the instrument cluster, but the oil level is
above the minimum level (when measured with special tool T40178).
•
There are no DTCs related to oil level stored in the ECM memory.
Technical Background
The oil level sensor is defective.
Page 1 of 3
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Audi
Production Solution
Updated oil level sensor.
Service
1. Use special tool T 40178 to verify that the oil level
is not below the minimum level:
•
Adjust the tool to 132 (Figure 1).
•
The oil level needs to be above "0" (minimum).
A00- 10331
Figure 1. Adjusting the tool.
2. Replace the oil level sensor.
Make sure that the oil level is at max (at 13 with
T 40178) with engine oil at operating temperature.
(I) Note:
Do not perform an oil consumption test.
Page 2 of 3
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Audi
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin
is informational only.
Service Number:
1711
Damage Code:
0010
Labor Operations: Replace oil level sensor (For A6, A7, A8, Q7)
Diagnostic Time:
1711 1900
90 TU
Replace oil level sensor (For A4, AS, QS)
1711 1900
70 TU
GFF
No allowance
0TU
Road test prior to service procedure
No allowance
0TU
Road test after service procedure
0121 0004
10 TU
Technical diagnosis at dealer's discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB # 2038119/6
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Part number
Part Description
Quantity
03C907660S
Oil level sensor
1
Tool number
Tool Description
T 40178
Oil level measuring tool
Additional Information
All parts and service references provided in this TSB (2038119) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
Page 3 of 3
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.