A20166520415947
Service Bulletin Details
Public Details for: A20166520415947
This technical service bulletin informs the reader that there is a pending service solution (pss) for mil on with dtc P046100 in vehicles with 4-cylinder engines.
Technical Service Bulletin PSS 20 MIL on (DTC P046100 - Fuel level sensor, circuit range/performance), 2.0 TFSI 20 16 65 2041594/7 April 7, 2016. Supersedes Technical Service Bulletin Group 20 number 16-59 dated January 25, 2016 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A4, A5, Q5 2013 - 2016 All 2.0L engines Condition REVISION HISTORY Revision Date Purpose 7 - Revised header data (Updated models) 6 1/25/2016 Revised header data (Added model code) 5 12/8/2015 Revised header data (Corrected Elsa display error) In vehicles with 2.0 TFSI engines only: • MIL on. • DTC P046100 (Fuel level sensor, circuit range/performance) is stored in the engine control module (ECM), J623 (address word 01). When: Normal driving conditions, city or highway. Speed: Any speed Temperature: Not applicable DTC: P046100 Technical Background Not applicable. Production Solution Not applicable. © 2016 Audi of America, Inc. Page 1 of 2 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Service 1. Explain to the customer that a solution is forthcoming and that no repairs are necessary at this point. Do not replace any components for this condition since this will not resolve the customer’s concern. Clear the DTC and release the vehicle. 2. Create a PSS record in the PSS application via the Pending Service Solutions link in AccessAudi (under Related Links>>Service), or through the Technical Assistance page in Elsa. Warranty Claim Type: 1EB Service Number: DADP Damage Code: 0010 Diagnostic Time: Check and clear fault 0132 0000 20 TU Road test prior to service procedure No allowance 0 TU Road test after service procedure No allowance 0 TU Technical diagnosis at dealer’s discretion. (Refer to Section 2.2 of the Audi Warranty Policies and Procedures Manual and Audi Warranty Online/Resource Center for DADP allowance details.) Claim Comment: As per PSS TSB #2041594/7 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Additional Information All parts and service references provided in this TSB (2041594) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. © 2016 Audi of America, Inc. Page 2 of 2 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.