A2016720433572

Service Bulletin Details

Public Details for: A2016720433572

This technical service bulletin provides a software code for correcting an issue that causes dtc P046100.


- 2016 - 2015 - 2014 - 2013 -

Technical Service Bulletin
20 MIL on (DTC P046100 - Fuel level sensor, circuit range/performance)
20 16 70 2043357/2 May 26, 2016. Supersedes Technical Service Bulletin Group 20 number 16-67 dated April 22,
2016 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A4, A5, A5
Cabriolet, Q5
2013 - 2016
All
2.0 TFSI
S4, S5, S5
Cabriolet
2014 - 2015
All
3.0 TFSI
Q5
2015 - 2016
All
Hybrid
Q5
2014 - 2015
All
3.0 TFSI
A6, A7
2014 - 2015
All
3.0 TFSI
A8
2015
All
3.0 TFSI
Condition
REVISION HISTORY
Revision
Date
Purpose
2
-
Revised header data (Added models)
Revised Service (Added models to SVM table)
1
4/22/2016
Initial publication
• MIL on.
• DTC P046100 (Fuel level sensor, circuit range/performance) is stored in the engine control module (ECM
J623).
Technical Background
DTC P046100 can be caused by miscalculations within the ECM software when the vehicle is being filled with
gasoline while the ignition is on.
Production Solution
New ECM software implemented to correct the condition.
© 2016 Audi of America, Inc.
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Service
IMPORTANT: The following instructions apply to vehicles with 2.0TFSI and 3.0TFSI engines only.
SVM Update Instructions
1. Follow all instructions in TSB 2011732, 00 Software Version Management (SVM), operating instructions.
2. Update the ECM (J623) using the SVM action code as listed in the table below.
3. After SVM update, cycle the ignition.
4. Start the engine. If engine runs rough and then surges, cycle the ignition once again.
5. Reset TPMS.
Model
Engine
Old Software
Part Number
Old Software
Version
New Software
Part Number
New Software
Version
A4,A5,A5
cabriolet
2.0 TFSI
8K5907115N
0001 / 0002 /
0003
8K5907115N
0004
A4,A5,A5
cabriolet
2.0 TFSI
8K5907115J
0001 / 0002
8K5907115N
0004
A4,A5,A5
cabriolet
2.0 TFSI
8K5907115P
0001
8K5907115P
0002
A4,A5,A5
cabriolet
2.0 TFSI
8K5907115M
0001 / 0002 /
0003
8K5907115M
0004
A4,A5,A5
cabriolet
2.0 TFSI
8K5907115Q
0001
8K5907115Q
0002
Q5
2.0 TFSI
8R1907115N
0001
8R1907115N
0002
Q5
2.0 TFSI
8R1907115P
0001
8R1907115P
0002
Q5
2.0 TFSI H
8R1907115L
0001 / 0002 /
0003
8R1907115L
0004
Q5
2.0 TFSI H
8R1907115M
0001 / 0002
8R1907115M
0003
Q5
2.0 TFSI
8R1907115F
0001
8R1907115L
0004
S4,S5,S5
cabriolet
3.0 TFSI
8K5907551G
0001 / 0002 /
0003 / 0004 /
0005
8K5907551G
0006
Q5
3.0 TFSI
8R0907551F
0001 / 0002 /
8R0907551F
0006
© 2016 Audi of America, Inc.
SVM
Code
Input
01A203
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
0003 / 0004 /
0005
SQ5
3.0 TFSI
8R0907551G
0001 / 0002 /
0003 / 0004 /
0005
8R0907551G
0006
A8
3.0 TFSI
4H2907551A
0001 / 0003 /
0004
4H2907551A
0005
A6,A7
3.0 TFSI
4G0907551J
0001 / 0002 /
0003
4G0907551J
0004
02A210
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service
Bulletin is informational only.
Service Number:
2470
Damage Code:
0039
Labor Operations:
Check software level in ECM and perform
update
2470 2599
Max 40 TU
Diagnostic Time:
GFF
No allowance
0 TU
Road test after service procedure
0121 0004
10 TU
Technical diagnosis at dealer’s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2043357/2
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
The following Technical Service Bulletin will be necessary to complete this procedure:
• TSB 2011732 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB (2043357) are subject to change and/or removal. Always
check with your Parts Dept. and service manuals for the latest information.
© 2016 Audi of America, Inc.
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.