L-SB-0082-15

L-SB-0082-15
October 27, 2015
Initialization of Advanced Parking Guidance System
Service
Category
General
Section
Pre-Delivery Service
Market USA
Applicability
YEAR(S)
MODEL(S)
2016
LS460, LS600H
ADDITIONAL INFORMATION
Introduction
The Advanced Parking Guidance System assists the driver during parking and parallel parking by
displaying an image of the area behind the vehicle and controlling the steering wheel with the
vehicle in reverse.
When the DCC fuses are removed or battery terminal disconnected, the power source to the
steering angle sensor is cut off. When the DCC fuses are reinstalled or the battery terminal is
reconnected, the rear view monitor will operate, but the steering angle sensor center position
must be set through system initialization before park assist will become operational.
Initialize the Advanced Parking Guidance System after installing the DCC fuses during
Pre-Delivery Service (PDS).
NOTE
Anytime the battery terminal has been disconnected, the Advanced Parking Guidance System
MUST be initialized.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
-
-
-
-
© 2015 Lexus, a division of Toyota Motor Sales, USA
Page 1 of 2
Page 2 of 2
Initialization of Advanced Parking Guidance System
Initialization Procedure
1. Start the engine.
Figure 1. Before Initialization
2. Check if the Advanced Parking Guidance
System is operative by moving the shift lever
to the “R” position. “System initializing.”
appears on the rear view monitor as shown in
Figure 1.
3. Move the shift lever to the “P” position and
turn the steering wheel lock to lock.
Figure 2. After Initialization
4. Move the shift lever to the “R” position.
When “Check surroundings for safety”
appears on the rear view monitor as shown in
Figure 2, the initialization of the Advanced
Parking Guidance System has been
completed.
© 2015 Lexus, a division of Toyota Motor Sales, USA