A15110F

Service Bulletin Details

Public Details for: A15110F

Service news article - do you have a fairly low mileage vehicle in your shop with the mil on, the gear position indicator blinking, and a/t dtc P2638 (torque feedback signal a range/performance)? Chances are the idle learn procedure wasnt


- 2016 -

Models from 2016
2016 HONDA PILOT 
ServiceNews Article
November 2015
A15110F Version 1
Do Idle Learn Correctly at PDI to Avoid A/T DTC P2638
AFFECTED VEHICLES
2016 Pilot with 9-speed A/T
Do you have a fairly low mileage vehicle in your shop with the MIL on, the Gear Position indicator blinking, and A/T DTC
P2638 (torque feedback signal A range/performance)? Chances are the idle learn procedure wasn’t done right at PDI.
To fix this problem, reset the PCM with the HDS, then do the idle learn procedure exactly as shown in the service
information.
© 2015 American Honda Motor Co., Inc. – All Rights Reserved
Page 1 of 1

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.