37K1 - BULLETIN

Service Bulletin Details

Public Details for: 37K1 - BULLETIN

On audi tt and tt roadster vehicles, with 2.0 ltr. Tfsi engine along with dq250 gearbox, manufactured within a specific period, it is not possible to readout event memory entries in mode 0a that have been saved in the engine control modul


- 2016 -

Technical Service Bulletin
Audi
37K1 UPDATE- TCM Software Update (FED_EMS)
June 14, 2016
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
TT, TTS and
TT Roadster
2016
See Campaign/Action screen in Elsa
None
Condition
This Update has been proactively released to prevent the following condition from occurring in the vehicle:
On Audi TT and TT Roadster vehicles, with 2.0 ltr. TFSI engine along with DQ250 gearbox, manufactured within a
specific period, it is not possible to readout event memory entries in "Mode 0A" that have been saved in the engine
control module.
This Update is in effect until removed.
Vehicle must meet all of the following criteria:
•
Procedure is valid only for vehicles that show the 37K1 code in the Elsa Campaign/Action Information screen
on the day of repair.
•
Vehicle must be within the Federal Emissions Warranty.
•
Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin.
•
Procedure must be performed on applicable vehicles in dealer inventory prior to sale.
Technical Background
On Audi TT and TT Roadster vehicles, with 2.0 ltr. TFSI engine along with DQ250 gearbox, manufactured within a
specific period, it is not possible to readout event memory entries in "Mode 0A" that have been saved in the engine
control module.
Page 1 of 4
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its liccnsors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Audi
Service
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Attach an appropriate battery charger to the vehicle.
3. Attach the scan tool to the vehicle using an USB cable.
4. Confirm that the scan tool is communicating with the diagnostic head by USB . If the Bluetooth
symbol is shown  then disconnect the diagnostic head from the vehicle and then reattach the USB
cable to the diagnostic head and then reattach to the vehicle.
Audi
O,pe;rating modes
~
....
5. Using Flashing, perform the update using the SVM action code, 37K1A231.
CD
AwARNING
NOTE
If the Bluetooth wireless VAS 5054A transmitter
head is used in conjunction with a VAS tester,
the transmitter head MUST BE connected with a
USB cable to the tester.
The Bluetooth function of the scan tool MUST
BE PHYSICALLY SWITCHED OFF prior to
performing this update. 
VAS:61-50 & VAS 6~ 50A
VAS 6150'8
VAS 616iOJ..VPC
(From pan.el1behind handle)
(Mlddte rf.ghl :side be:hri.d W]RELESS door)
(Upper lell sid'e behind sea door)
1
Page 2 of 4
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its liccnsors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Audi
Warranty
Claim Entry Instructions
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order.
If customer refused campaign work or vehicle is out of the specified warranty parameter for this Update:
,/
U.S. dealers: Submit the request through Audi Warranty Online under the Campaigns/Update option.
,/
Canada dealers: Fax repair order to Warranty at (905) 428-4811.
Service Number
37K1
Damage Code
0099
Parts Vendor Code
Claim Type
002
Sold vehicle: 7 10
Unsold vehicle: 7 90
Causal Indicator
Vehicle Wash/Loaner
Criteria I.D.
Mark Labor as causal part
Do not claim wash/loaner under this action
FV
Connect battery charger.
Labor operation: 2706 8950
10 T.U.
--AND-Perform software update via SVM
Labor operation: 3730 2599
Time state on diagnostic
protocol (max 40 TU)
Page 3 of 4
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its liccnsors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Audi
Additional Actions Some of the affected vehicles may be involved in additional Actions.
Please check your Elsa Campaign/Action Information screen so that any
additional required work can be done simultaneously.
Verifying Vehicle
Eligibility
To verify vehicle eligibility for this Update, always check the Elsa
Campaign/Action Information screen. The Elsa system is the only binding
inquiry and verification system; other systems are not valid and may
result in non-payment of a claim.
Help for Claim
Entry
For questions regarding claim entry, contact Audi Warranty.
Required
Customer
Notification
Inform your customer in writing by recording on the Repair Order any and
all work that was conducted on the vehicle, including any and all updates
completed under this Update.
Additional Information
All parts and service references provided in this Update are subject to change and/or removal. Always check Elsa
for the most current version of this document.
Page 4 of 4
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its liccnsors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.