MY 2017 TT-TTS R

Service Bulletin Details

Public Details for: MY 2017 TT-TTS R

New document


- 2017 -

2017
TT/TTS Roadster
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Deactivate vehicle transport mode*
This step must be performed with the engine off, and ignition on
 Verify tool kit is installed securely in luggage compartment
 Set spare tire pressure*
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
 Verify tire repair kit and compressor are present
 Set service reminder*
Interior
 Perform any open campaigns*
 Verify operation of all seat belts and latches
Under the Hood Inspection
 Check battery clamps for proper torque*
 Perform a battery test*
 Check engine oil level*
 Check all fluid levels and top off if necessary
 Check operation of window, lock, and seat controls*
 Check rear view mirror operation*
 Inspect mirrors for proper operation*
 Verify operation of all interior lights
 Check heated steering wheel operation (if equipped)
 Verify operation heated seats
Exterior
 Verify proper operation of climate control*
 Check all key buttons and features*
 Inspect operation of all power outlets*
Lighting and Windshield
 Verify operation of front Passenger Occupant Detection
System
 Test exterior lighting functions
 Install wiper blades
 Test windshield washers
Settings
 Verify operation of MMI touch pad
Trunk Inspection
 Set Time source setting to “GPS” and set Auto daylight
savings time to “on.”*
 Verify trunk is operational
 Verify and set language and Measurement Units*
 Verify operation of emergency release handle
 Verify speech dialogue system is operating*
 Set dealership location in navigation (if equipped)*
Effective 7-15-2016-US
Version 1.0
PRE-DELIVERY INSPECTION (PDI) | 1
Audi Service
2017
TT/TTS Roadster
Audi Pre-Delivery Inspection
Media/ Radio/ SAT
Driving Performance (continued)
0 Verify operation of both USB ports and aux. input
D Test drive vehicle applying brakes several times*
D Check steering/tire alignment
0 Verify operation of CD/DVD player
D Insert SD card and test function of all slots
D Program the presets to local stations
0 Verify rear spoiler functionality
D Check for squeaks, rattles and wind noise
D Calibrate rear view mirror*
D Verify quality of radio reception in AM/FM/SiriusXM bands
Audi connect (USA ONLY) (if equipped)
0 Verify Audi connect Information Packet is present (if
equipped)*
Driver Assistance
D Connect the dealer demo SIM card to verify system connects
to mobile network*
0 Verify all cruise control functions
0 Verify Audi side assist functionality (if equipped)
D Turn on the wireless network (if equipped)*
D Check Wi-Fi hotspot functionality*
D Enable Google Earth (if equipped)*
0 Verify operation of parking system*
0 Activate NAV and follow directions back to dealership (if
equipped)
On-Hoist Inspection
Convertible Functionality (if equipped)
D Remove transport suspension blocks (follow ELSA instruc-
D Test operation of power folding top*
tion)
D Check steering, boots, brake system, hoses, tires and wheels
for damage
0 Verify convertible top manual closing tools are present
Post-Road Test Inspection
D Check underside of vehicle for fluid leaks and loose compo-
D Interrogate fault memory and print Diagnostic Log
D Ensure the yellow tire pressure tag is installed on the steer-
nents
D Inspect wheel bolts for proper torque*
D Install wheel locks (if equipped)
D Install wheel bolt covers and center caps as supplied*
D Set and store tire pressures for either sold vehicle OR stock
ing wheel
0 Apply Inventory Maintenance Sticker
D Install showroom charger to ensure battery remains
charged at all times
inventory vehicle*
Driving Performance
D Check horn operation
0 Verify hold and release of electronic parking brake
0 Verify engine performance and acceleration*
0 Verify transmission operation, including shift paddles
~,~
~
~
Technician
I certify that all opecat;oas ha,e beeo rnmpteted aod th;, ,ehkte has beeo pee pared ;, acrn,dao
		

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.