MY 2017 A7-S7 PD

2017
A7 / A7 competition / S7 / RS 7 / RS 7 performance
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Deactivate vehicle transport mode
This step must be performed with the engine off, and ignition ON*
 Deactivate air suspension loading mode (if equipped)*
 Verify tool kit is installed securely in luggage compartment
 Set spare tire pressure*
 Verify operation of luggage cover
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
Interior
 Set service reminder*
 Verify operation of all seat belts and latches
 Perform any open campaigns*
 Check operation of window, lock, and seat controls*
Under the Hood Inspection
 Check battery clamps for proper torque*
 Perform a battery test*
 Check engine oil level*
 Check rear view mirror operation*
 Inspect mirrors for proper operation*
 Verify operation of all interior lights
 Check heated steering wheel operation (if equipped)
 Check all fluid levels and top off if necessary
 Verify operation heated/ventilated and massaging seats (if
equipped)*
Exterior
 Verify proper operation of climate control*
 Check all key buttons and features*
 Inspect operation of all power outlets
 Check all doors for proper power closing (if equipped)*
 Check panoramic sunroof and sunshade operation*
Lighting and Windshield
 Verify operation of front Passenger Occupant Detection
System
 Test exterior lighting functions
 Install wiper blades
 Test front washers (and headlight washers if equipped)*
Settings
 Verify operation of MMI touch pad
Trunk Inspection
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”
 Verify trunk is operational
 Verify and set language and Measurement Units*
Effective 8-16-2016-US
Version 1.1
PRE-DELIVERY INSPECTION (PDI) | 1
2017
A7 / A7 competition / S7 / RS 7 / RS 7 performance
Audi Pre-Delivery Inspection
Settings (continued)
Driving Performance
 Verify speech dialog system is operating*
 Check horn operation
 Load Onboard Video Tutorials*
 Verify hold and release of electronic parking brake
 Set “Music volume while parking” to 6 lines*
 Verify engine Start-Stop System functionality*
 Set dealership location in navigation (if equipped)*
 Verify engine performance and acceleration*
Media / Radio / SAT
 Verify transmission operation, including shift paddles (if
equipped)
 Verify operation of both USB ports
 Test drive vehicle applying brakes several times*
 Verify operation of CD/DVD player (if equipped)
 Check adaptive air suspension in all positions (if equipped)
 Insert SD card and test function of all slots
 Check steering/tire alignment
 Program the presets to local stations
 Verify rear spoiler functionality
 Verify HD Radio is turned “off”*
 Check for squeaks, rattles and wind noise
 Calibrate rear view mirror*
Audi connect (USA ONLY) (if equipped)
 Verify quality of radio reception in AM/FM/SiriusXM bands
 Verify Audi connect Information Packet is present (if
equipped)*
Driver Assistance
 Connect the dealer demo SIM card to verify system connects
to mobile network*
 Verify cruise control/ACC with Stop & Go functionality (if
equipped)
 Turn on the wireless network (if equipped)*
 Verify Audi side assist functionality (if equipped)
 Check Wi-Fi hotspot functionality*
 Verify Audi active lane assist functionality (if equipped)
 Enable Google Earth *
 Verify operation of night vision camera (if equipped)
 Verify operation of parking system (if equipped)*
On-Hoist Inspection
 Verify all vehicle Head-up Display functionality (if
equipped)*
 Remove transport suspension blocks (follow ELSA instruction)
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check underside of vehicle for fluid leaks and loose components
 Inspect wheel bolts for proper torque*
 Install wheel locks (if equipped)
 Install wheel bolt covers*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
 Activate NAV and follow directions back to dealership (if
equipped)
Post-Road Test Inspection
 Interrogate fault memory and print Diagnostic Log
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Apply Inventory Maintenance Sticker
 Install showroom charger to ensure battery remains
charged at all times
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 8-16-2016-US
Version 1.1
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2

2017
A7 / A7 competition / S7 / RS 7 / RS 7 performance
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Deactivate vehicle transport mode
This step must be performed with the engine off, and ignition ON*
 Deactivate air suspension loading mode (if equipped)*
 Verify tool kit is installed securely in luggage compartment
 Set spare tire pressure*
 Verify operation of luggage cover
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
Interior
 Set service reminder*
 Verify operation of all seat belts and latches
 Perform any open campaigns*
 Check operation of window, lock, and seat controls*
Under the Hood Inspection
 Check battery clamps for proper torque*
 Perform a battery test*
 Check engine oil level*
 Check rear view mirror operation*
 Inspect mirrors for proper operation*
 Verify operation of all interior lights
 Check heated steering wheel operation (if equipped)
 Check all fluid levels and top off if necessary
 Verify operation heated/ventilated and massaging seats (if
equipped)*
Exterior
 Verify proper operation of climate control*
 Check all key buttons and features*
 Inspect operation of all power outlets
 Check all doors for proper power closing (if equipped)*
 Check panoramic sunroof and sunshade operation*
Lighting and Windshield
 Verify operation of front Passenger Occupant Detection
System
 Test exterior lighting functions
 Install wiper blades
 Test front washers (and headlight washers if equipped)*
Settings
 Verify operation of MMI touch pad
Trunk Inspection
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”
 Verify trunk is operational
 Verify and set language and Measurement Units*
Effective 8-16-2016-US
Version 1.1
PRE-DELIVERY INSPECTION (PDI) | 1
Audi Service
2017
A7 / A7 competition/ 57 / RS 7 / RS 7 performance
Audi Pre-Delivery Inspection
Settings (cont inued)
Driving Performance
D Verify speech dialog system is operating*
D Load Onboard Video Tutorials*
D Set "Music volume while parking" to 6 lines*
D Set dealership location in navigation (if equipped)*
D Check horn operation
D Verify hold and release of electronic parking brake
D Verify engine Start-Stop System functionality*
D Verify engine performance and acceleration*
D Verify transmission operation, including shift paddles (if
equipped)
Media / Radio / SAT
D Test drive vehicle applying brakes several times*
D Check adaptive air suspension in all positions (if equipped)
D Check steering/tire alignment
D Verify rear spoiler functionality
D Check for squeaks, rattles and wind noise
D Calibrate rear view mirror*
D Verify quality of radio reception in AM/FM/SiriusXM bands
D Verify operation of both USB ports
D Verify operation of CD/DVD player (if equipped)
D Insert SD card and test function of all slots
D Program the presets to local stations
D Verify HD Radio is turned "off"*
Audi connect (USA ONLY) ( if equipped)
D Verify Audi connect Information Packet is present (if
Driver Assistance
equipped)*
D Connect the dealer demo SIM card to verify system connects D Verify cruise control/AC( with Stop & Go functionality (if
equipped)
to mobile network*
D Verify Audi side assist functionality (if equipped)
D Verify Audi active lane assist functionality (if equipped)
D Verify operation of night vision camera (if equipped)
D Verify operation of parking system (if equipped)*
D Verify all vehicle Head-up Display functionality (if
D Turn on the wireless network (if equipped)*
D Check Wi-Fi hotspot functionality*
D Enable Google Earth *
On-Hoist Inspecti on
equipped)*
D Remove transport suspension blocks (follow ELSA instruction)
D Activate NAV and follow directions back to dealership (if
D Check steering, boots, brake system, hoses, tires and wheels
equipped)
for damage
D Check underside of vehicle for fluid leaks and loose components
D Inspect wheel bolts for proper torque*
D Install wheel locks (if equipped)
D Install wheel bolt covers*
D Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Post-Road Test Inspection
D Interrogate fault memory and print Diagnostic Log
D Ensure the yellow tire pressure tag is installed on the steering wheel
D Apply Inventory Maintenance Sticker
D Install showroom charger to ensure battery remains
charged at all times
~,~
~
Technician
~
I c,rtffy that all opmt;oos ha~ b,eo completed aod th;s ~h;ct, has b,eo pcepared ;o acco,dao