MY 2017 Q5 PDI T

Service Bulletin Details

Public Details for: MY 2017 Q5 PDI T

Removed from title and content removed from title


- 2017 -

2017
Q5/SQ5
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
Vehicle Preparation
Trunk Inspection
 Check Elsa for open campaigns and updates
 Verify power tailgate is operational and set default opening
height*
 Deactivate vehicle transport mode*
This step must be performed with the engine off, and ignition on
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
 Set service reminder*
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify tool kit is installed securely in luggage compartment
 Verify inflatable spare tire and compressor are present
 Verify operation of luggage cover
 Perform any open campaigns *
Under the Hood Inspection
 Check battery clamps for proper torque*
 Perform a battery test*
 Check engine oil level*
 Check all fluid levels and top off if necessary
Interior
 Verify operation of all seat belts and latches
 Check operation of window, lock, and seat controls*
 Check rear view mirror operation*
 Inspect mirrors for proper operation*
 Verify operation of all interior lights
Exterior
 Verify operation heated seats (if equipped)
 Check all key buttons and features*
 Verify operation heated/ventilated seats (if equipped)*
 Prepare the base bars for customer delivery (install bars
only upon customer request)*
 Verify proper operation of climate control*
Lighting and Windshield
 Test exterior lighting functions
 Inspect operation of all power outlets
 Check panoramic sunroof and sunshade operation*
 Verify operation of front Passenger Occupant Detection
System
 Install wiper blades
 Test front washers (and headlight washers if equipped)*
Settings
 Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*
 Verify and set language and Measurement Units*
Effective 8-16-2016-US
Version 1.1
PRE-DELIVERY INSPECTION (PDI) | 1
2017
Q5/SQ5
Audi Pre-Delivery Inspection
Settings (continued)
Driving Performance
 Verify speech dialog system is operating*
 Check horn operation
 Load Onboard Video Tutorials*
 Verify hold and release of electronic parking brake
 Set “Music volume while parking” to 6 lines*
 Verify engine Start-Stop System functionality*
 Set dealership location in navigation (if equipped)*
 Verify engine performance and acceleration*
Media / Radio / SAT
 Verify transmission operation, including shift paddles (if
equipped)
 Verify operation of AMI or aux. input (if equipped)
 Test drive vehicle applying brakes several times*
 Verify operation of CD/DVD player (if equipped)
 Check steering/tire alignment
 Insert SD card and test function of all slots
 Check for squeaks, rattles and wind noise
 Program the presets to local stations
 Calibrate rear view mirror*
 Verify HD Radio is turned “off”*
 Verify quality of radio reception in AM/FM/SiriusXM bands
Audi connect (USA ONLY) (if equipped)
Driver Assistance
 Verify Audi connect Information Packet is present (if
equipped)*
 Verify cruise control/ACC functionality (if equipped)
 Connect the dealer demo SIM card to verify system connects
to mobile network*
 Verify operation of parking system (if equipped)*
 Verify Audi side assist functionality (if equipped)
 Activate NAV and follow directions back to dealership (if
equipped)
 Turn on the wireless network (if equipped)*
 Check Wi-Fi hotspot functionality*
Post-Road Test Inspection
 Enable Google Earth (if equipped)*
 Interrogate fault memory and print Diagnostic Log
On-Hoist Inspection
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Remove transport suspension blocks (follow ELSA instruction)
 Apply Inventory Maintenance Sticker
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Install showroom charger to ensure battery remains
charged at all times
 Check underside of vehicle for fluid leaks and loose components
 Inspect wheel bolts for proper torque*
 Install wheel locks (if equipped)
 Install wheel bolt covers and center caps as supplied*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 8-16-2016-US
Version 1.1
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2

2017
Q5/SQ5
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test
as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI
function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
Vehicle Preparation
Trunk Inspection
 Check Elsa for open campaigns and updates
 Verify power tailgate is operational and set default opening
height*
 Deactivate vehicle transport mode*
This step must be performed with the engine off, and ignition on
 Set adaption channel to enable CD Ripping (if equipped with
NAV)*
 Set service reminder*
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify tool kit is installed securely in luggage compartment
 Verify inflatable spare tire and compressor are present
 Verify operation of luggage cover
 Perform any open campaigns *
Under the Hood Inspection
 Check battery clamps for proper torque*
 Perform a battery test*
 Check engine oil level*
 Check all fluid levels and top off if necessary
Interior
 Verify operation of all seat belts and latches
 Check operation of window, lock, and seat controls*
 Check rear view mirror operation*
 Inspect mirrors for proper operation*
 Verify operation of all interior lights
Exterior
 Verify operation heated seats (if equipped)
 Check all key buttons and features*
 Verify operation heated/ventilated seats (if equipped)*
 Prepare the base bars for customer delivery (install bars
only upon customer request)*
 Verify proper operation of climate control*
Lighting and Windshield
 Test exterior lighting functions
 Inspect operation of all power outlets
 Check panoramic sunroof and sunshade operation*
 Verify operation of front Passenger Occupant Detection
System
 Install wiper blades
 Test front washers (and headlight washers if equipped)*
Settings
 Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*
 Verify and set language and Measurement Units*
Effective 8-16-2016-US
Version 1.1
PRE-DELIVERY INSPECTION (PDI) | 1
Audi Service
2017
QS/SQS
Audi Pre-Delivery Inspection
Settings (continued)
Driving Performance
D Verify speech dialog system is operating*
D Load Onboard Video Tutorials*
D Set "Music volume while parking" to 6 lines*
D Set dealership location in navigation (if equipped)*
D Check horn operation
D Verify hold and release of electronic parking brake
D Verify engine Start-Stop System functionality*
D Verify engine performance and acceleration*
D Verify transmission operation, including shift paddles (if
Media / Radio/ SAT
equipped)
D Verify operation of AMI or aux. input (if equipped)
D Verify operation of CD/DVD player (if equipped)
D Insert SD card and test function of all slots
D Program the presets to local stations
D Verify HD Radio is turned "off"*
0Verify quality of radio reception in AM/FM/SiriusXM bands
Audi connect (USA ONLY) ( if equipped)
Driver Assistance
D Verify Audi connect Information Packet is present (if
D Verify cruise control/AC( functionality (if equipped)
D Verify Audi side assist functionality (if equipped)
D Verify operation of parking system (if equipped)*
D Activate NAV and follow directions back to dealership (if
D Test drive vehicle applying brakes several times*
D Check steering/tire alignment
D Check for squeaks, rattles and wind noise
D Calibrate rear view mirror*
equipped)*
D Connect the dealer demo SIM card to verify system connects
to mobile network*
D Turn on the wireless network (if equipped)*
D Check Wi-Fi hotspot functionality*
D Enable Google Earth (if equipped)*
equipped)
Post-Road Test Inspection
D Interrogate fault memory and print Diagnostic Log
D Ensure the yellow tire pressure tag is installed on the steer-
On-Hoist Inspection
D Remove transport suspension blocks (follow ELSA instruc-
ing wheel
tion)
D Apply Inventory Maintenance Sticker
D Check steering, boots, brake system, hoses, tires and wheels D Install showroom charger to ensure battery remains
for damage
charged at all times
D Check underside of vehicle for fluid leaks and loose components
D Inspect wheel bolts for proper torque*
D Install wheel locks (if equipped)
D Install wheel bolt covers and center caps as supplied*
D Set and store tire pressures for either sold vehicle OR stock
inventory ve hide*
~,~
~
~
Technician
I certify that all opecat;oas ha,e beeo rnmpteted aod th;, ,ehkte has beeo pee pared ;, acrn,dao
		

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.