WE - A15-056
Service Bulletin Details
Public Details for: WE - A15-056
"service bulletin - american honda is extending the warranty coverage on all electronic power steering torque sensors to 5 years from the original date of purchase with no mileage limit. This only applies to vehicles with eps dtcs 53-01 tor
Models from 2014
2014 HONDA ACCORD PLUG-IN HYBRID |
Models from 2013
2013 HONDA ACCORD |
(g)HONDA Service Bulletin 15-056 August 21, 2015 02208 Version 1 Warranty Extension: EPS Torque Sensor (DTC 53-01 or DTC 53-02) AFFECTED VEHICLES Year Model 2013 Accord 2014 Accord Plug-In Trim ALL ALL VIN Range Check the iN VIN status for eligibility Check the iN VIN status for eligibility BACKGROUND American Honda is extending the warranty coverage on all electronic power steering torque sensors to 5 years from the original date of purchase with no mileage limit. This only applies to vehicles with EPS DTCs 53-01 torque sensor (low/high check) or OTC 53-02 torque sensor (average check). This warranty extension will not apply to any vehicle that has ever been declared a total loss or sold for salvage by a financial institution or insurer, or has a branded or similar title under any state's law. CUSTOMER NOTIFICATION Owners of affected vehicles will be sent a notification of this warranty extension in September 2015. Do an iN VIN status inquiry to make sure the vehicle is shown as eligible. CORRECTIVE ACTION Diagnose the vehicle, if OTC 53-01 or OTC 53-02 is stored, replace the power steering gear box assembly. Page 1 of 4 CUSTOMER INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely maintain your vehicle. These procedures should not be attempted by "do-it-yourselfers," and you should not assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Honda automobile dealer. © 2015 American Honda Motor Co., Inc. - All Rights Reserved PARTS INFORMATION NOTE: • American Honda expects very few (250 vehicles nationally) will require a gearbox replacement. • Replacement gearbox assemblies are available through the controlled parts ordering system. As American Honda expects very few vehicles will require gearbox replacement, please do not place orders unless you have a vehicle with DTC 53-01 or 53-02. Accord L4 Replacement Parts Part Name Part Number Quantity Power Steering Gear Box Assembly (Sedan and Coupe) 53601-T2F-A04 1 Power Steering Gear Box Assembly (Sport) 53601-T2F-A94 1 Split Pin 94201-30220 2 Gear Box Mounting Bolt 90108-T2A-A01 3 Flange Bolt (1 O mm x 30 mm) 90176-S5A-OOO 3 Mass Nut (12 mm) 90371-T2F-A01 2 Flange Bolt (1 O mm x 35 mm) 90163-SDA-A01 1 Flange Bolt (12 mm x 139 mm) (CVT) 90176-TAO-AO 1 1 Flange Bolt (10 mm x40 mm) 90169-TAO-AOO 3 Flange Bolt (12 mm x 150 mm) (MIT) 90162-TL 1-E01 1 Self-Locking Nut (10 mm) 90212-SA5-003 6 Exhaust Pipe Gasket 18212-T2F-A01 1 Pre-Chamber Gasket (Coupe) 18393-SSO-J30 1 Flange But (10 mm) 90371-S87-AOO 2 Flange Bolt (1 O mm x 34 mm) 90162-T2A-AOO 4 Flange Bolt (14 mm x 35 mm) 90176-SDA-AOO 2 Flange Bolt (14 mm x150 mm) 90177-SDA-AOO 2 Flange Bolt (12 mm x 33 mm) 90186-SDA-AOO 2 Tie Rod Lock Washer 53536-SJK-003 2 Part Name Part Number Quantity Power Steering Gear Box Assembly (Sedan) 53601-T2G-A02 1 Power Steering Rack Gear Box Assembly (Coupe) 53601-T2G-A92 1 Split Pin 94201-30220 2 Gear Box Mounting Bolt 90108-T2A-A01 3 Flange Bolt (1 O mm x 30 mm) 90176-S5A-OOO 3 Mass Nut (12 mm) 90371-T2F-A01 2 Flange Bolt (1 O mm x 35 mm) (A/T) 90163-SDA-A01 1 Accord VG Replacement Parts Page 2 of 4 Flange Nut (12 mm) (A/T) 90371-SEF-OOO 2 Flange Bolt (1 O mm x 90 mm) (A/T) 90162-T2G-AOO 4 Flange Bolt (12 mm x 139 mm) (MIT) 90176-TAO-AO 1 1 Flange Bolt (1 O mm x 105 mm) (MIT) 90162-S5C-OOO 2 Flange Bolt (1 O mm x 90 mm) (M/T) 90162-T2G ADO 2 Self-Locking Nut (10 mm) 90212-SA5-003 9 Exhaust Pipe Gasket 18212-SA7-003 2 Pre-Chamber Gasket 18393-SDB-AOO 1 Flange Nut (10 mm) 90371-S87-AOO 2 Flange Bolt (1 O mm x 34 mm) 90162-T2A-AOO 4 Flange Bolt (14 mm x 135 mm) 90176-SDA-AOO 2 Flange Bolt (14 mm x 150 mm) 90177-SDA-AOO 2 Flange Bolt (12 mm x33 mm) 90186-SDA-AOO 2 Tie Rod Lock Washer 53536-SDA-A02 2 Part Name Part Number Quantity Power Steering Gear Box Assembly 53601-T3V-A02 1 Split Pin (3 mm x 22 mm) 94201-30220 2 Gear Box Mounting Bolt 90108-T2A-A01 3 Flange Bolt (1 O mm x 30 mm) 90176-S5A-OOO 3 Mass Nut (12 mm) 90371-T2F-A01 2 Flange Bolt (1 O mm x 35 mm) 90163-SDA-A01 1 Flange Bolt (12 mm x 139 mm) (CVT) 90176-TAO-AO 1 1 Flange Bolt (1 O mm x 40 mm) 90169-T AO-AOO 3 Self-Locking Nut (10 mm) 90212-SA5-003 6 Exhaust Pipe Gasket 18212-T2F-A01 1 Flange Nut (10 mm) 90371-S87-AOO 2 Flange Bolt (1 O mm x 34 mm) 90162-T2A-AOO 4 Flange Bolt (14 mm x 135 mm) 90176-SDA-AOO 2 Flange Bolt (14 mm x 150 mm) 90177-SDA-AOO 2 Flange Bolt (12 mm x 33 mm) 90186-SDA-AOO 2 Tie Rod Lock Washer 53536-SDA-A02 2 Accord Plug-In Replacement Parts Page 3 of 4 WARRANTY CLAIM INFORMATION NOTE: • A template ID cannot be applied at this time for this bulletin due to the extensive number of required replacement parts. This concern will be resolved in the near future. • Make sure you enter DTC 53-01 or 53-02 into the DTC field in the warranty claim; failure to follow this process correctly may result in an error code to your warranty claim. Operation Number Description Flat Rate Time 5131 K9 Accord VG - Replace the power steering gear box assembly (includes alignment). 3.8 hrs 5131 K9 Accord L4 - Replace the power steering gear box assembly (includes alignment). 3.2 hrs Accord Plug-In - Replace the power steering gear box assembly (includes alignment). 3.2 hrs 5131 K9 Defect Code: 5Z200 Symptom Code: JT600 Skill Level: Repair Technician Failed Part Number 53601-T2G-A02 DIAGNOSIS 1. Connect the HDS and check if DTC 53-01 or 53-02 is stored. • • If OTC 53-01 or 53-02 is stored, go to REPAIR PROCEDURE. If OTC 53-01 or 53-02 is not stored, this Warranty Extension does not apply. Continue with normal troubleshooting. REPAIR PROCEDURE 1. Refer to service information to remove and install the new power steering gear box. NOTE: • Pay particular attention and care when disconnecting and reconnecting connectors. Do not damage the connectors and make sure they are fully seated • Make sure all must-replace nuts and bolts are replaced. • Make sure all nuts and bolts are properly torqued. • Make sure all re-writing is done. • Make sure an alignment is done. 2. Give your warranty clerk the RO that includes the OTC. END. Page 4 of 4