MY 2017 AUDI TEC

Audi Service
2017
Pre-Delivery Inspection
Technician Reference Document
Effective 9-26-2016-US
Version 1.9
Audi Service
Table of Contents
Technician Reference Document
Technician Reference Document Overview
The Pre-Delivery Inspection Technician Reference Document is designed to be a resource used in hand with
the Pre-Delivery Inspection Checklist (POI). The POI Checklist has been simplified to make the process more
efficient, and in doing so, this document has been created to be used as a reference for checklist items that
may have additional information. On the POI Checklist, you find that certain items have been notated with an
asterisk symbol(*), this lets you know that additional information can be found in this Technician Reference
Document.
Below you will find a list of each model, with the page numbers to their left. After navigating to the desired
page, you will notice each model page is formatted similarly to the POI Checklists. After each section title is the
original checklist item, followed by any additional information specific to that model.
Table of Contents
3-4
A3/S3 Sedan & Cabriolet
5-6
A4 Sedan/A4 allroad
7-8
AS Sport/55 Cabriolet
9-10
AS Sport/55 Coupe
11-12
A6/A6 competition/56
13-14
A7 /A7 competition/57 /RS 7 /RS 7 performance
15-16
A8 L/58 plus
17-18
Q3
19-20
QS/SQS
21-23
Q7
24-25
R8 Coupe
26-27
TT/TTS Coupe
28-29
TT Roadster
Effective 9-26-2016-US
Version 1.9
Model Year 2017 1 Audi Pre-Delivery Reference Document 1 2
Audi Service
A3/S3 Sedan & Cabriolet
Technician Reference Document
Vehicle Preparation
Trunk Inspection
., Deactivate vehicle transport mode
., Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
This step must be performed with the ignition on/engine
off or the 03 brake module may remain in transport mode.
See TSB 2042954 for resolution.
Deactivate vehicle transport mode (via Special functions>
POI service> 19-Transport mode activating/deactivating.)
., Set adaption channel to enable CD Ripping (if equipped
with NAV)*
Using ODIS, right click the SF-Information control unit 1,
and select "Guided Functions> SF-Adaptations> Storage of
music activating/deactivating (option 2) and when prompted
for the Optical drive, choose option 1 for "On"
., Set service reminder
via Special functions-> POI service-> 17-PDI-resetting SRI
at POI, counter reset, etc
., Perform any open campaigns
Follow instructions listed in campaign documentation
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit
., Set spare tire pressure (Sedan only)
See separate "2017 Normal Load Condition Tire Pressure
Table" posted on ServiceNet
Interior
., Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating
., Check rear view mirror operation
Check self-dimming function/lighting
., Verify proper operation of climate control
Under the Hood Inspection
., Check battery clamps for proper torque
Re-torque if required
., Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis-> Special functions-> POI service. Select
option 2, the battery test for new batteries as part of the
pre-delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting "ok" when tester wants
to send the current generated diagnosis protocol on line.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
., Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Ensure proper heating and A/C cooling and open all panel
vents for all zones
., Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
., Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
., Verify and set language and Measurement Units
This can be changed in the Settings menu by going to Menu>
Vehicle> Vehicle settings
., Verify Speech dialog system is operating
Press the "Talk" button and verify several commands
., Set "Entertain. Fad." in Parking aid to Medium
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Effective 9-26-2016-US
Version 1.9
Via "Menu->Vehicle->Left Option->Driver Assistance->Parking
Aid"
., Load Onboard Video Tutorials
Load On board Video Tutorials> Turn ignition on> Insert the
On board DVD into the DVD Drive> Select Menu> Vehicle>
Left Option> Vehicle Settings> Owner's manual and with
the CD/DVD inserted select "Yes" to start the update> Turn
off ignition to start update (the update will take approx. S
minutes)> Once completed, remove the disk and place back
into the case for the next vehicle
Model Year 2017 1 Audi Pre-Delivery Reference Document
I3
Audi Service
A3/S3 Sedan & Cabriolet
Technician Reference Document
Settings (continued)
On-Hoist Inspection
., Set dealership location in navigation (if equipped)
., Perform a coolant reservoir cap pressure test
Set dealership location for following back to dealership
during road test
., Turn off Manual Speed Warning
This can be changed in the Driver Assistance settings by
going to Menu> Vehicle> Driver Assistance> Speed Warning
> Manual->Select Off
Media/ Radio/ SAT
., Verify HD Radio is turned "off"
This can be found in the Radio/Settings Menu
via ELSA-> Enter VIN#-> Repair manual Engine-> 4-Cylinder
Direct Injection 1.8L; 2.0L 4VTFSI Engine (Generation III)
-> 19 Cooling System-> Coolant System/Coolant-> Cooling
System, Checking for Leaks-> Pressure Relief Valve in Cap,
Checking. Only the procedure "Pressure Relief Valve in Cap,
Checking" should be performed in the document Cooling
System, Checking for Leaks
., Inspect wheel bolts for proper torque
Use torque wrench to verify
., Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the POI kit
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present (if
equipped)
Verify Audi connect Information Packet is present, including
Audi brochure, AT&T brochure, AT&T Terms & Conditions
(T&C) (if applicable)
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
., Verify system connects to mobile network (if equipped).
Review TSB 2042942 for additional information
Make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
., Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (Telephone> Options > Wi-Fi options > Wi-Fi Mode "Hotspot")
., Check Wi-Fi hotspot Visibility. No data available at PDI (if
equipped)
Check Wi-Fi hotspot functionality is enabled and verify the
Access point (SSID) is set to "Audi_MMI_XXXX," where XXXX
is the last four digits of VIN. via Telephone> Options> Wi-Fi
options > Wi-Fi Mode "Hotspot" > Hotspot settings > Access
point (SSID)
., Enable Google Earth (if equipped)
Enable Google Earth in the Navigation> Map Settings and
verify the white Google logo appears in the bottom right
hand corner of the MMI screen
Effective 9-26-2016-US
Version 1.9
Driving Performance
., Verify engine performance and acceleration
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/vibration/pulsation
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
., Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
Model Year 2017 1 Audi Pre-Delivery Reference Document 14
Audi Service
A4 Sedan/A4 allroad
Technician Reference Document
Vehicle Preparation
Trunk Inspection
., Deactivate vehicle transport mode
., Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
This step must be performed with the ignition on/engine
off or the 03 brake module may remain in transport mode.
See TSB 2042954 for resolution.
Deactivate vehicle transport mode (via Special functions>
POI service> 19-Transport mode activating/deactivating.)
., Set adaption channel to enable CD Ripping (if equipped
with NAV)*
Using ODIS, right click the SF-Information control unit 1,
and select "Guided Functions> SF-Adaptations> Storage of
music activating/deactivating (option 2) and when prompted
for the Optical drive, choose option 1 for "On"
., Set service reminder
via Special functions-> POI service-> 17-PDI-resetting SRI
at POI, counter reset, etc
., Perform any open campaigns
Follow instructions listed in campaign documentation
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit
., Set spare tire pressure
See separate "2017 Normal Load Condition Tire Pressure
Table" posted on ServiceNet
Interior
., Check operation of windows and locks
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating
., Check rear view mirror operation
Check self-dimming function/lighting
., Verify proper operation of climate control
Under the Hood Inspection
., Check battery clamps for proper torque
Re-torque if required
., Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis-> Special functions-> POI service. Select
option 2, the battery test for new batteries as part of the
pre-delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting "ok" when tester wants
to send the current generated diagnosis protocol on line.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
., Check engine oil level
Fill oil to the max level when the vehicle is at operating
temperature
Ensure proper heating and A/C cooling and open all panel
vents for all zones
., Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
., Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
., Verify and set language and Measurement Units
This can be changed in the Settings menu by going to Menu>
Vehicle> Vehicle settings
., Verify Speech dialog system is operating
Press the "Talk" button and verify several commands
., Set "Entertain. Fad." in Parking aid to Medium
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Effective 9-26-2016-US
Version 1.9
Via "Menu->Vehicle->Left Option->Driver Assistance->Parking Aid"
., Load Onboard Video Tutorials
Load On board Video Tutorials> Turn ignition on> Insert the
On board DVD into the DVD Drive> Select Menu> Vehicle>
Left Option> Vehicle Settings> Owner's manual and with
the CD/DVD inserted select "Yes" to start the update> Turn
off ignition to start update (the update will take approx. S
minutes)> Once completed, remove the disk and place back
into the case for the next vehicle
Model Year 2017 1 Audi Pre-Delivery Reference Document
I5
Audi Se r v ice
A4 Sedan/A4 allroad
Technician Reference Document
Settings (continued)
On-Hoist Inspection
., Set dealership location in navigation (if equipped)
., Perform a coolant reservoir cap pressure test
Set dealership location for following back to dealership
during road test
., Turn off Manual Speed Warning
This can be changed in the Driver Assistance settings by
going to Menu> Vehicle> Driver Assistance> Speed Warning
> Manual->Select Off
Media/ Radio/ SAT
., Verify HD Radio is turned "off"
This can be found in the Radio/Settings Menu
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present (if
equipped)
Verify Audi connect Information Packet is present, including
Audi brochure, AT&T brochure, AT&T Terms & Conditions
(T&C) (if applicable)
., Verify system connects to mobile network (if equipped).
Review TSB 2042942 for additional information
Make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
., Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (Telephone> Options > Wi-Fi options > Wi-Fi Mode "Hotspot")
., Check Wi-Fi hotspot Visibility. No data available at PDI (if
equipped)
Check Wi-Fi hotspot functionality is enabled and verify the
Access point (SSID) is set to "Audi_MMI_XXXX," where XXXX
is the last four digits of VIN. via Telephone> Options> Wi-Fi
options > Wi-Fi Mode "Hotspot" > Hotspot settings > Access
point (SSID)
., Enable Google Earth (if equipped)
Enable Google Earth in the Navigation> Map Settings and
verify the white Google logo appears in the bottom right
hand corner of the MMI screen
via ELSA-> Enter VIN#-> Repair manual Engine-> 4-Cylinder
Direct Injection 1.8L; 2.0L 4VTFSI Engine (Generation III)
-> 19 Cooling System-> Coolant System/Coolant-> Cooling
System, Checking for Leaks-> Pressure Relief Valve in Cap,
Checking. Only the procedure "Pressure Relief Valve in Cap,
Checking" should be performed in the document Cooling
System, Checking for Leaks
., Inspect wheel bolts for proper torque
Use torque wrench to verify
On-Hoist Inspecti
., Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the POI kit
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
Driving Performance
., Verify engine performance and acceleration
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/vibration/pulsation
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
., Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
., Verify all vehicle Head-up display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
Effective 9-26-2016-US
Version 1.9
Model Year 2017 1 Audi Pre-Delivery Reference Document
I6
Audi Service
AS Sport/55 Cabriolet
Technician Reference Document
Vehicle Preparation
Trunk Inspection
., Deactivate vehicle transport mode
., Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Deactivate vehicle transport mode (via Special functions->
Service work-> 19-Transport mode activating/deactivating)
., Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Special functions-> Service
work-> : SF-Activating/deactivating storage of music). Also
referred to as CD Ripping. Perform 3 button reset of the MMI
to complete the activation. Refer to the owners manual for
model specific button sequence
., Set service reminder
via Special functions-> POI service-> 17-PDI-resetting SRI
at POI, counter reset, etc.
., Perform any open campaigns
Follow instructions listed in campaign documentation
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit
., Set spare tire pressure
See separate "2017 Normal Load Condition Tire Pressure
Table" posted on ServiceNet
Interior
., Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
., Check rear view mirror operation
Under the Hood Inspection
., Check battery clamps for proper torque
Re-torque if required
., Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis-> POI Service. Select option 2, the battery
test for new batteries as part of the pre-delivery inspection
and act according to the test result (ok, recharge, replace).
Ensure diagnosis log is uploaded to the GFF paperless server
by selecting "ok" when tester wants to send the current
generated diagnosis protocol on line. (Note: Do not use Guided Function. The diagnosis log will not be uploaded to GFF
paperless)
., Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Check self-dimming function/lighting (if equipped)
., Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
., Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
., Set Time source setting to "GPS" and set Auto daylight
savings time to "on."
Change time zone appropriate to the dealer location
., Verify and set language and Measurement Units
This can be changed in the Setup/Settings menu
., Verify speech dialog system is operating
Press the "Talk" button and verify several commands
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
., Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Effective 9-26-2016-US
Version 1.9
., Load Onboard Video Tutorials
Load On board Video Tutorials> Turn ignition on> Insert the
On board DVD into the DVD Drive> Select the CAR function
button. System will initialize>Selectthe Owner's Man.
function by selecting the upper right control button> Select
"Yes"> Select "CD/DVD"> Select "Start update"> Turn off
ignition to start update (the update will take approx. 5 minutes)> Once completed, remove the disk and place back into
the case for the next vehicle
Model Year 2017 1 Audi Pre-Delivery Reference Document 1 7
Audi Service
AS Sport/55 Cabriolet
Technician Reference Document
Settings (continued)
On-Hoist Inspection (continued)
., Set "Music volume while parking" to 6 lines
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
Accessed via MMI rear view camera display, Settings> Music
volume while parking (applies to vehicles with park assist or
rear view camera)
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
., Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
Media/ Radio/ SAT
., Verify HD Radio is turned "off"
Driving Performance
., Verify engine performance and acceleration
Listen for abnormal noise/vibrations
This can be found in the Radio/Settings Menu
., Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present (if
equipped)
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Verify Audi connect Information Packet is present including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile Terms & Conditions (T&C)(if applicable)
., Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the dealer demo SIM card to the vehicle and make
sure the system fully connects to 2G or 3G (2G or 3G symbol
with Box surrounding it) (only applies if in a T-Mobile service
area)
., Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function
button > Settings Ctrl button > Wi-Fi settings > Wi-Fi active >
select "Visible")
Convertible Functionality (if equipped)
~
Test operation of power folding top
Perform with engine running to conserve battery power
Driver Assistance
., Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
., CheckWi-Fi hotspot functionality
Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to "AU DIXXXXX," where XXXXX = the last five digits of VIN that are automatically preset in the system
., Enable Google Earth
Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 2G or 3G symbol
On-Hoist Inspection
., Inspect wheel bolts for proper torque
Use torque wrench to verify
., Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the POI kit
Effective 9-26-2016-US
Version 1.9
Model Year 2017 1 Audi Pre-Delivery Reference Document
I8
Audi Service
AS Sport/55 Coupe
Technician Reference Document
Vehicle Preparation
Trunk Inspection
., Deactivate vehicle transport mode
., Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Deactivate vehicle transport mode (via Special functions->
Service work-> 19-Transport mode activating/deactivating)
., Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Special functions-> Service
work-> : SF-Activating/deactivating storage of music). Also
referred to as CD Ripping. Perform 3 button reset of the MMI
to complete the activation. Refer to the owners manual for
model specific button sequence
., Set service reminder
via Special functions-> POI service-> 17-PDI-resetting SRI
at POI, counter reset, etc.
., Perform any open campaigns
Follow instructions listed in campaign documentation
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit
., Set spare tire pressure
See separate "2017 Normal Load Condition Tire Pressure
Table" posted on ServiceNet
Interior
., Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
., Check rear view mirror operation
Under the Hood Inspection
., Check battery clamps for proper torque
Re-torque if required
., Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis-> POI Service. Select option 2, the battery
test for new batteries as part of the pre-delivery inspection
and act according to the test result (ok, recharge, replace).
Ensure diagnosis log is uploaded to the GFF paperless server
by selecting "ok" when tester wants to send the current
generated diagnosis protocol on line. (Note: Do not use Guided Function. The diagnosis log will not be uploaded to GFF
paperless)
., Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Check self-dimming function/lighting (if equipped)
., Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
., Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
., Set Time source setting to "GPS" and set Auto daylight
savings time to "on."
Change time zone appropriate to the dealer location
., Verify and set language and Measurement Units
This can be changed in the Setup/Settings menu
., Verify speech dialog system is operating
Press the "Talk" button and verify several commands
., Load Onboard Video Tutorials
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
., Test front washers (and headlight washers if equipped)
Load On board Video Tutorials> Turn ignition on> Insert the
On board DVD into the DVD Drive> Select the CAR function
button. System will initialize>Selectthe Owner's Man.
function by selecting the upper right control button> Select
"Yes"> Select "CD/DVD"> Select "Start update"> Turn off
ignition to start update (the update will take approx. 5 minutes)> Once completed, remove the disk and place back into
the case for the next vehicle
Headlights must be on to test functionality of the headlight
washers
Effective 9-26-2016-US
Version 1.9
Model Year 2017 1 Audi Pre-Delivery Reference Document
I9
Audi Service
AS Sport/55 Coupe
Technician Reference Document
Settings (continued)
On-Hoist Inspection (continued)
., Set "Music volume while parking" to 6 lines
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
Accessed via MMI rear view camera display, Settings> Music
volume while parking (applies to vehicles with park assist or
rear view camera)
., Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
Media/ Radio/ SAT
., Verify HD Radio is turned "off"
This can be found in the Radio/Settings Menu
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
Driving Performance
., Verify engine performance and acceleration
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present (if
equipped)
Verify Audi connect Information Packet is present including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile Terms & Conditions (T&C)(if applicable)
., Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the dealer demo SIM card to the vehicle and make
sure the system fully connects to 2G or 3G (2G or 3G symbol
with Box surrounding it) (only applies if in a T-Mobile service
area)
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
., Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
., Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function
button > Settings Ctrl button > Wi-Fi settings > Wi-Fi active >
select "Visible")
., CheckWi-Fi hotspot functionality
Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to "AU DIXXXXX," where XXXXX = the last five digits of VIN that are automatically preset in the system
., Enable Google Earth
Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 2G or 3G symbol
On-Hoist Inspection
., Inspect wheel bolts for proper torque
Use torque wrench to verify
., Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the POI kit
Effective 9-26-2016-US
Version 1.9
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 10
Audi Service
A6/A6 competition/56
Technician Reference Document
Vehicle Preparation
Exterior (continued)
., Deactivate vehicle transport mode
., Check all doors for proper power closing (if equipped)
Deactivate vehicle transport mode (via Special functions->
Service work-> 19-Transport mode activating/deactivating)
For vehicles equipped with the power door closing feature,
check all doors for proper closing
., Deactivate air suspension loading mode (if equipped)
via Special Functions-> Service Work-> 34-Loading mode
activating/deactivating Warning! Car body may lower!
., Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Control Module list-> SF->
Guided Functions-> SF Adaption). Also referred to as CD
Ripping. Perform 3 button reset of the MMI to complete the
activation. Refer to the owners manual for model specific
button sequence
., Set service reminder
via Special functions-> POI Service-> 17-PDI-resetting SRI
at POI, counter reset, etc.
., Perform any open campaigns
Follow instructions listed in campaign documentation
Lighting and Windshield
., Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
., Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit
., Set spare tire pressure
See separate "2017 Normal Load Condition Tire Pressure
Table" posted on ServiceNet
Under the Hood Inspection
Interior
., Check battery clamps for proper torque
., Check operation of window, lock, and seat controls
Re-torque if required
., Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis-> Special functions-> POI service. Select
option 2, the battery test for new batteries as part of the
pre-delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting "ok" when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
., Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Effective 9-26-2016-US
Version 1.9
Check operation of all switches: Locks, windows, seat adjustment, seat ventilation and massage (if equipped), heated
seats and child safety features
., Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
., Verify operation heated/ventilated and massaging seats (if
equipped)
Check both front and rear. Massaging feature is in the front
seats only (if equipped)
., Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
., Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Model Year2017
I Audi
Pre-Delivery Reference Document
I 11
Audi Service
A6/A6 competition/56
Technician Reference Document
Settings
Audi connect (USA ONLY) (if equipped) (continued)
., Set Time source setting to "GPS" and set Auto daylight
savings time to "on"
., CheckWi-Fi hotspot functionality
Change time zone appropriate to the dealer location
., Verify and set language and Measurement Units
This can be changed in the Setup/Settings menu
., Verify speech dialog system is operating
Press the "Talk" button and verify several commands
., Load Onboard Video Tutorials
Load On board Video Tutorials> Turn ignition on> Insert the
On board DVD into the DVD Drive> Select the CAR function
button. System will initialize>Selectthe Owner's Man.
function by selecting the upper right control button> Select
"Yes"> Select "CD/DVD"> Select "Start update"> Turn off
ignition to start update (the update will take approx. 5 minutes)> Once completed, remove the disk and place back into
the case for the next vehicle
., Set "Music volume while parking" to 6 lines
Accessed via MMI rear view camera display, Settings> Music
volume while parking (applies to vehicles with park assist or
rear view camera)
., Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
Media/ Radio/ SAT
., Verify HD Radio is turned "off"
This can be found in the Radio/Settings Menu
Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to "AU DIXXXXX," where XXXXX = the last five digits of VIN that are automatically preset in the system
., Enable Google Earth (if equipped)
Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 2G or 3G symbol
On-Hoist Inspection
., Inspect wheel bolts for proper torque
Use torque wrench to verify
., Install wheel bolt covers
Wheel bolt covers can be found in the POI kit
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
Driving Performance
., Verify engine Start-Stop System functionality
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner's manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
., Verify engine performance and acceleration
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present (if
equipped)
Verify Audi connect Information Packet is present, including
Audi brochure, AT&T brochure, customer SIM card, AT&T
Terms & Conditions (T&C)(if applicable)
., Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
., Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function
button > Settings Ctrl button > Wi-Fi settings > Wi-Fi active >
select "Visible")
Effective 9-26-2016-US
Version 1.9
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
., Verify operation of parking system (if equipped)
Verify operation of Audi parking system with rear view camera and top and/or corner view cameras
., Verify all vehicle Head-up Display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 12
Audi Service
A7/A7 competition/57/RS 7/RS 7 performance
Technician Reference Document
Vehicle Preparation
Lighting and Windshield
., Deactivate vehicle transport mode
., Test front washers (and headlight washers if equipped)
Deactivate vehicle transport mode (via Special functions->
Service work-> 19-Transport mode activating/deactivating)
Headlights must be on to test functionality of the headlight
washers
., Deactivate air suspension loading mode (if equipped)
via Special Functions-> Service Work-> 34-Loading mode
activating/deactivating Warning! Car body may lower!
., Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Control Module list-> SF->
Guided Functions-> SF Adaption). Also referred to as CD
Ripping. Perform 3 button reset of the MMI to complete the
activation. Refer to the owners manual for model specific
button sequence
Trunk Inspection
., Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit
., Set spare tire pressure
See separate "2017 Normal Load Condition Tire Pressure
Table" posted on ServiceNet
., Set service reminder
via Special functions-> POI Service-> 17-PDI-resetting SRI
at POI, counter reset, etc.
., Perform any open campaigns
Follow instructions listed in campaign documentation
Under the Hood Inspection
., Check battery clamps for proper torque
Re-torque if required
., Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis-> Special functions-> POI service. Select
option 2, the battery test for new batteries as part of the
pre-delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting "ok" when tester wants
to send the current generated diagnosis protocol on line.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
., Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
., Check all doors for proper power closing (if equpped)
For vehicles equipped with the power door closing feature,
check all doors for proper closing
Effective 9-26-2016-US
Version 1.9
Interior
., Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, seat ventilation and massage (if equipped), heated
seats and child safety features
., Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
., Verify operation heated/ventilated & massaging seats (if
equipped)
Check both front and rear. Massaging feature is in the front
seats only (if equipped)
., Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
., Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
., Set Time source setting to "GPS" and set Auto daylight
savings time to "on"
Change time zone appropriate to the dealer location
., Verify and set language and Measurement Units
This can be changed in the Setup/Settings menu
., Verify speech dialog system is operating
Press the "Talk" button and verify several commands
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 13
Audi Service
A7/A7 competition/57/RS 7/RS 7 performance
Technician Reference Document
Settings (continued)
On-Hoist Inspection
., Load Onboard Video Tutorials
., Inspect wheel bolts for proper torque
Load On board Video Tutorials> Turn ignition on> Insert the
On board DVD into the DVD Drive> Select the CAR function
button. System will initialize>Selectthe Owner's Man.
function by selecting the upper right control button> Select
"Yes"> Select "CD/DVD"> Select "Start update"> Turn off
ignition to start update (the update will take approx. 5 minutes)> Once completed, remove the disk and place back into
the case for the next vehicle
., Set "Music volume while parking" to 6 lines
Accessed via MMI rear view camera display, Settings> Music
volume while parking (applies to vehicles with park assist or
rear view camera)
., Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
Media/ Radio/ SAT
., Verify HD Radio is turned "off"
This can be found in the Radio/Settings Menu
Use torque wrench to verify
., Install wheel bolt covers
Wheel bolt covers can be found in the POI kit
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
Driving Performance
., Verify engine Start-Stop System functionality
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner's manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
., Verify engine performance and acceleration
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present (if
equipped)
Verify Audi connect Information Packet is present, including
Audi brochure, AT&T brochure, customer SIM card, AT&T
Terms & Conditions (T&C)(if applicable)
., Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
., Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function
button > Settings Ctrl button > Wi-Fi settings > Wi-Fi active >
select "Visible")
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
., Verify operation of parking system (if equipped)
Verify operation of Audi parking system with rear view camera and top and/or corner view cameras
., Verify all vehicle Head-up Display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
., CheckWi-Fi hotspot functionality
Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to "AU DIXXXXX," where XXXXX = the last five digits of VIN that are automatically preset in the system
., Enable Google Earth (if equipped)
Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 2G or 3G symbol
Effective 9-26-2016-US
Version 1.9
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 14
Audi Service
AB L/58 plus
Technician Reference Document
Vehicle Preparation
Lighting and Windshield
., Deactivate vehicle transport mode
., Test front washers (and headlight washers if equipped)
Deactivate vehicle transport mode (via Special functions->
Service work-> 19-Transport mode activating/deactivating)
Headlights must be on to test functionality of the headlight
washers
., Deactivate air suspension loading mode (if equipped)
via Special Functions-> Service Work-> 34-Loading mode
activating/deactivating Warning! Car body may lower!
., Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Special functions-> Service
work-> : SF-Activating/deactivating storage of music). Also
referred to as CD Ripping. Perform 3 button reset of the MMI
to complete the activation. Refer to the owners manual for
model specific button sequence
Trunk Inspection
., Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit
., Set spare tire pressure
See separate "2017 Normal Load Condition Tire Pressure
Table" posted on ServiceNet
., Set service reminder
via Special functions-> POI Service-> 17-PDI-resetting SRI
at POI, counter reset, etc.
., Perform any open campaigns
Follow instructions listed in campaign documentation
Under the Hood Inspection
., Check battery clamps for proper torque
Re-torque if required
., Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis-> Special functions-> POI service. Select
option 2, the battery test for new batteries as part of the
pre-delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting "ok" when tester wants
to send the current generated diagnosis protocol on line.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
., Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Interior
., Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, seat ventilation and massage (if equipped), heated
seats and child safety features
., Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
., Verify operation heated/ventilated & massaging seats (if
equipped)
Check both front and rear.
., Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
., Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
., Check all doors for proper power closing (if equpped)
., Set Time source setting to "GPS" and set Auto daylight
savings time to "on"
Change time zone appropriate to the dealer location
., Verify and set language and Measurement Units
This can be changed in the Setup/Settings menu
., Verify speech dialog system is operating
Press the "Talk" button and verify several commands
For vehicles equipped with the power door closing feature,
check all doors for proper closing
Effective 9-26-2016-US
Version 1.9
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 15
Audi Service
AB L/58 plus
Technician Reference Document
Settings (continued)
Audi connect (USA ONLY) (if equipped) (continued)
., Load Onboard Video Tutorials
., CheckWi-Fi hotspot functionality
Load On board Video Tutorials> Turn ignition on> Insert the
On board DVD into the DVD Drive> Select the CAR function
button. System will initialize>Selectthe Owner's Man.
function by selecting the upper right control button> Select
"Yes"> Select "CD/DVD"> Select "Start update"> Turn off
ignition to start update (the update will take approx. 5 minutes)> Once completed, remove the disk and place back into
the case for the next vehicle
., Set "Music volume while parking" to 6 lines
Accessed via MMI rear view camera display, Settings> Music
volume while parking (applies to vehicles with park assist or
rear view camera)
., Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
Media/ Radio/ SAT
., Verify operation of Rear Seat Entertainment (if equipped)
Rear Seat Entertainment/Rear MMI: Verify operation. Verify
the wireless headphones are present and pair them to the
RSE system (refer to RSE manual). When pairing the headphones, press and hold the on/off button for 4-5 seconds
until the light starts flashing quickly. Also verify the DVD
units operate
., Verify HD Radio is turned "off"
This can be found in the Radio/Settings Menu
Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to "AU DIXXXXX," where XXXXX = the last five digits of VIN that are automatically preset in the system
., Enable Google Earth (if equipped)
Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 2G or 3G symbol
On-Hoist Inspection
., Inspect wheel bolts for proper torque
Use torque wrench to verify
., Install wheel bolt covers
Wheel bolt covers can be found in the POI kit
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
Driving Performance
., Verify engine Start-Stop System functionality
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner's manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
., Verify engine performance and acceleration
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present (if
equipped)
Verify Audi connect Information Packet is present including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile Terms & Conditions (T&C)(if applicable)
., Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the dealer demo SIM card to the vehicle and make
sure the system fully connects to 2G or 3G (2G or 3G symbol
with Box surrounding it) (only applies if in a T-Mobile service
area)
., Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function
button > Settings Ctrl button > Wi-Fi settings > Wi-Fi active >
select "Visible")
Effective 9-26-2016-US
Version 1.9
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
., Verify operation of parking system (if equipped)
Verify operation of Audi parking system with rear view camera and top and/or corner view cameras
., Verify all vehicle Head-up Display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 16
Audi Service
UM
Technician Reference Document
Vehicle Preparation
Lighting and Windshield
., Deactivate vehicle transport mode
., Test front washers (and headlight washers if equipped)
Deactivate vehicle transport mode (via Special functions->
Service work-> 19-Transport mode activating/deactivating )
., Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Special functions-> Service
work-> : SF-Activating/deactivating storage of music). Also
referred to as CD Ripping. Perform 3 button reset of the MMI
to complete the activation. Refer to the owners manual for
model specific button sequence
., Set service reminder
via Special functions-> POI Service-> 17-PDI-resetting SRI
at POI, counter reset, etc
., Perform any open campaigns
Follow instructions listed in campaign documentation
Under the Hood Inspection
., Check battery clamps for proper torque
Re-torque if required
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
., Verify power tailgate is operational and set default opening
height
If equipped with power rear tailgate, adjust the opening
height to 75 inches (190 cm) from the ground to the close
button in the rear lid. Press and hold the close button in the
rear lid for at least four seconds to program the opening
height
., Install wheel bolt cover removal tool from PDI kit into
trunk lid toolkit
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit to the right of the
spare tire
., Set spare tire pressure
See separate "2017 Normal Load Condition Tire Pressure
Table" posted on ServiceNet .
., Check engine oil level
Check engine oil level via the MMI - fill oil to the max level
when the vehicle is at operating temperature
., Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis-> Special functions-> POI service. Select
option 2, the battery test for new batteries as part of the
pre-delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting "ok" when tester wants
to send the current generated diagnosis protocol on line.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
., Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Interior
., Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
., Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
., Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
., Inspect operation of all power outlets
Inspect operation of outlet in front of center console and
behind center console
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors
and trunk manually and remotely lock/unlock with all keys,
including all door handle sensors with Advanced Key (if
equipped)
., Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
., Set Time source setting to "GPS" and set Auto daylight
savings time to "on."
Change time zone appropriate to the dealer location
Effective 9-26-2016-US
Version 1.9
Model Year2017
I Audi
Pre-Delivery Reference Document
I 17
Audi Service
UM
Technician Reference Document
Settings (continued)
Audi connect (USA ONLY) (if equipped) (continued)
., Verify and set language and Measurement Units
., Turn on the wireless network (if equipped)
This can be changed in the Setup/Settings menu
., Verify speech dialog system is operating
Press the "Talk" button and verify several commands
., Load Onboard Video Tutorials from SD card
Requirements: 1 SD card at least 2GB in size.
1.
2.
Website: Download Installation content from http://
www.audiiqs.com/ . Select In-Car Video Tutorials from
the main screen. Choose 2017 and Select "Download
Tutorial" for the 2017 Q3. Refer to the File Extraction
Document for instructions to copy data to SD Card.
Car: Load On board Video Tutorials> Turn ignition on>
Insert the Created SD Card for 2017 Q3 into SDl slot>
Select the CAR function button. System will initialize>
Select the Owner's Man. function by selecting the upper
right control button> Select "Yes"> Select SDl"> Select
"Start update"> Turn off ignition to start update (the
update will take approx. 5 minutes)> Once completed,
remove the SD Card and store to be used again for the
next vehicle.
., Set "Music volume while parking" to 6 lines
Accessed via MMI rear view camera display, Settings> Music
volume while parking (applies to vehicles with park assist or
rear view camera)
., Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
Ensure the wireless network is turned on (TEL function
button > Settings Ctrl button > Wi-Fi settings > Wi-Fi active >
select "Visible")
., CheckWi-Fi hotspot functionality
Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to "AU DIXXXXX," where XXXXX = the last five digits of VIN that are automatically preset in the system
., Enable Google Earth (if equipped)
Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 2G or 3G symbol
On-Hoist Inspection
., Inspect wheel bolts for proper torque
Use torque wrench to verify
., Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the POI kit
On-Hoist Inspection (continued)
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
Media/ Radio/ SAT
Driving Performance
., Verify HD Radio is turned "off"
., Verify engine performance and acceleration
This can be found in the Radio/Settings Menu
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present
Verify Audi connect Information Packet is present including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile Terms & Conditions (T&C)(if applicable)
., Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the dealer demo SIM card to the vehicle and make
sure the system fully connects to 2G or 3G (2G or 3G symbol
with Box surrounding it) (only applies if in a T-Mobile service
area)
Effective 9-26-2016-US
Version 1.9
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
., Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 18
Audi Service
QS/SQS
Technician Reference Document
Vehicle Preparation
Exterior (continued)
., Deactivate vehicle transport mode
., Prepare the base bars for customer delivery (install bars
only upon customer request)
Deactivate vehicle transport mode (via Special functions->
Service work-> 19-Transport mode activating/deactivating )
., Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Special functions-> Service
work-> : SF-Activating/deactivating storage of music). Also
referred to as CD Ripping. Perform 3 button reset of the MMI
to complete the activation. Refer to the owners manual for
model specific button sequence
., Set service reminder
via Special functions-> POI Service-> 17-PDI-resetting SRI
at POI, counter reset, etc
Install the rubber strips to the top of the base carrier bars
(do not install the carrier bars on the vehicle unless customer
has requested). Repackage the bars into the box if they are
not being installed on the vehicle. Retrieve the paper with
the torque wrench key code from the base carrier bar box.
Insert the paper with the key code into the owner's literature
wallet. Record torque wrench key code in the VDF to ensure
it's documented in the event the paper with the code is
misplaced
., Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
., Perform any open campaigns
Follow instructions listed in campaign documentation
Under the Hood Inspection
., Check battery clamps for proper torque
Re-torque if required
., Check engine oil level
Check engine oil level via the MMI - fill oil to the max level
when the vehicle is at operating temperature
., Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis-> Special functions-> POI service. Select
option 2, the battery test for new batteries as part of the
pre-delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting "ok" when tester wants
to send the current generated diagnosis protocol on line.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
., Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors
and trunk manually and remotely lock/unlock with all keys,
including all door handle sensors with Advanced Key (if
equipped)
Effective 9-26-2016-US
Version 1.9
Trunk Inspection
., Verify power tailgate is operational and set default opening
height
Adjust the trunk lid opening height to 77.7 inches (197 cm)
from the ground to the close button in the rear lid. Press and
hold the close button in the rear lid for at least four seconds
to program the opening height
., Install wheel bolt cover removal tool from PDI kit into
trunk lid toolkit
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit to the right of the
spare tire
Interior
., Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
., Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
., Verify operation heated/ventilated seats (if equipped)
Check both front and rear (if equipped)
., Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 19
Audi Service
QS/SQS
Technician Reference Document
Interior (continued)
Audi connect (USA ONLY) (if equipped) (continued)
., Check panoramic sunroof and sunshade operation
., Turn on the wireless network
Verify open/close/vent/deflector at edge and sunshade
operation
Settings
., Set Time source setting to "GPS" and set Auto daylight
savings time to "on."
Change time zone appropriate to the dealer location
., Verify and set language and Measurement Units
This can be changed in the Setup/Settings menu
., Verify speech dialog system is operating
Press the "Talk" button and verify several commands
., Load Onboard Video Tutorials
Load On board Video Tutorials> Turn ignition on> Insert the
On board DVD into the DVD Drive> Select the CAR function
button. System will initialize>Selectthe Owner's Man.
function by selecting the upper right control button> Select
"Yes"> Select "CD/DVD"> Select "Start update"> Turn off
ignition to start update (the update will take approx. 5 minutes)> Once completed, remove the disk and place back into
the case for the next vehicle
., Set "Music volume while parking" to 6 lines
Accessed via MMI rear view camera display, Settings> Music
volume while parking (applies to vehicles with park assist or
rear view camera)
., Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
Media/ Radio/ SAT
., Verify HD Radio is turned "off"
This can be found in the Radio/Settings Menu
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present
Verify Audi connect Information Packet is present including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile Terms & Conditions (T&C)(if applicable)
., Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the dealer demo SIM card to the vehicle and make
sure the system fully connects to 2G or 3G (2G or 3G symbol
with Box surrounding it) (only applies if in a T-Mobile service
area)
Effective 9-26-2016-US
Version 1.9
Ensure the wireless network is turned on (TEL function
button > Settings Ctrl button > Wi-Fi settings > Wi-Fi active >
select "Visible")
., CheckWi-Fi hotspot functionality
Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to "AU DIXXXXX," where XXXXX = the last five digits of VIN that are automatically preset in the system
., Enable Google Earth
Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 2G or 3G symbol
On-Hoist Inspection
., Inspect wheel bolts for proper torque
Use torque wrench to verify
., Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the POI kit
., Set and store tire pressures for either sold vehicle OR
stock inventory vehicle (See separate "2016 Normal Load
Condition Tire Pressure Table" posted on ServiceNet)
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
Driving Performance
., Verify engine Start-Stop System functionality
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner's manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
., Verify engine performance and acceleration
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
., Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 20
Audi Service
Technician Reference Document
Vehicle Preparation
Exterior (continued)
~
~
Deactivate vehicle transport mode
Deactivate vehicle transport mode (via Special functions->
POI service-> 19-Transport mode activating/deactivating)
This step must be performed with the engine off, ignition
on, or the 03 brake module may remain in transport mode.
See TSB 2042954 for resolution
~
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
~
Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set service reminder
~
via Special functions-> POI service-> 17-PDI-resetting SRI
at POI, counter reset, etc.
~
Perform any open campaigns
Follow instructions listed in campaign documentation
Verify power tailgate is operational and set default opening
height
Adjust the trunk lid opening height to 75 inches (190 cm)
from the ground to the close button in the rear lid. Press and
hold the close button in the rear lid for at least four seconds
to program the opening height. Verify operation of handsfree release (if equipped)
Using ODIS, right click the SF-Information control unit 1,
and select "Guided Functions> SF-Adaptations> Storage of
music activating/deactivating (option 2) and when prompted
for the Optical drive, choose option 1 for "On"
~
Test front washers (and headlight washers if equipped)
Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit
~
Set spare tire pressure
See separate "2017 Normal Load Condition Tire Pressure
Table" posted on ServiceNet
Under the Hood Inspection
~
Check battery clamps for proper torque
Re-torque if required
~
~
Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis-> Special functions-> POI service. Select
option 2, the battery test for new batteries as part of the
pre-delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting "ok" when tester wants
to send the current generated diagnosis protocol on line.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
~
Interior
~
Check rear view mirror operation
Check self-dimming function/lighting
~
Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating
~
Verify operation front heated seats
Ensure seat rail end caps are in place and in tact
Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Check operation of windows and locks
Check operation of all switches: Locks, windows, and child
safety features
~
Verify operation of manual folding 2nd row and power
folding 3rd row seats
Controls for the power folding 3rd row are located in the
trunk
Exterior
~
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
~
~
Check all key buttons and features
Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents for all zones
~
Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Check all doors for proper power closing (if equipped)
For vehicles equipped with the power door closing feature,
check all doors for proper closing
Effective 9-26-2016-US
Version 1.9
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 21
Audi Service
Technician Reference Document
Settings
Audi connect (USA ONLY) (if equipped) (continued)
., Verify and set language and Measurement Units
., Check Wi-Fi hotspot visibility. No data is available at PDI (if
equipped)
This can be changed in the Settings menu by going to Menu>
Vehicle> Vehicle settings
., Verify Speech dialog system is operating
Press the "Talk" button and verify several commands
., Set "Entertain. Fad." in Parking aid to Medium
Via Menu> Vehicle> Driver Assistance> Parking Aid
., Load Onboard Video Tutorials
Load On board Video Tutorials> Turn ignition on> Insert the
On board DVD into the DVD Drive> Select Menu> Vehicle>
Left Option> Vehicle Settings> Owner's manual and with
the CD/DVD inserted select "Yes" to start the update> Turn
off ignition to start update (the update will take approx. 5
minutes)> Once completed, remove the disk and place back
into the case for the next vehicle
., Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
., Turn off Manual Speed Warning
This can be changed in the Driver Assistance settings by
going to Menu> Vehicle> Driver Assistance> Speed Warning
> Manual->Select Off
Media/ Radio/ SAT
Check Wi-Fi hotspot visibility is enabled and verify the Access
point (SSID) is set to "Audi_MMI_XXXX," where XXXX is
the last four digits of VIN. via Telephone> Options> Wi-Fi
options > Wi-Fi Mode "Hotspot" > Hotspot settings > Access
point (SSID)
., Enable Google Earth (if equipped)
Enable Google Earth in the Navigation> Map Settings and
verify the white Google logo appears in the bottom right
hand corner of the MMI screen
On-Hoist Inspection
., Inspect wheel bolts for proper torque
Use torque wrench to verify
., Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the POI kit
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
., Verify HD Radio is turned "off"
This can be found in the Radio/Settings Menu
Driving Performance
., Verify engine Start-Stop System functionality
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present (if
equipped)
Verify Audi connect Information Packet is present, including
Audi brochure, AT&T brochure, AT&T Terms & Conditions
(T&C)(if applicable)
., Verify system connects to mobile network (if equipped)
Review TSB 2042942 for additional information
Make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
., Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (Telephone> Options > Wi-Fi options > Wi-Fi Mode "Hotspot")
Effective 9-26-2016-US
Version 1.9
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner's manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
., Verify engine performance and acceleration
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/vibration/pulsation
., Verify operation of all-wheel steering with vehicle speeddependent control (if equipped)
All-wheel steering with vehicle speed-dependent control
counter-steers under 37 mph and dynamic parallel-steers
above 50 mph (if equipped)
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 22
Audi Service
Technician Reference Document
Driver Assistance
., Verify Audi side assist functionality Pre sense rear (if
equipped)
Includes Rear cross traffic alert and Vehicle exit assist (if
equipped)
., Verify operation of parking system plus
Verify operation of Audi Parking aid with rear view camera
and top and/or corner view cameras (if equipped)
., Verify all vehicle Head-up display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
Effective 9-26-2016-US
Version 1.9
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 23
Audi Service
RB Coupe
Technician Reference Document
Vehicle Preparation
Exterior (continued)
., Deactivate vehicle transport mode
., Test front washers (and headlight washers if equipped)
This step must be performed with the engine off, ignition
on, or the 03 brake module may remain in transport mode.
See TSB 2042954 for resolution
Deactivate vehicle transport mode (via Special functions->
POI service-> 19-Transport mode activating/deactivating)
., Set adaption channel to enable CD Ripping (if equipped
with NAV)*
Set adaptation channel (via Control Module list-> SF->
Guided Functions-> SF Adaption). Also referred to as CD
Ripping.Perform 3 button reset of the MMI to complete the
activation. Refer to the owners manual for model specific
button sequence
., Deactivate the anti-theft function for the Navigation DVD
Deactivate the anti-theft function for the Navigation DVD
using the Scan Tool. Follow the process outlined in TSB
2013790
., Set service reminder
via Special functions-> POI service-> 17-PDI-resetting SRI
at POI, counter reset, etc
., Perform any open campaigns
Follow instructions listed in campaign documentation
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
., Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit
Interior
., Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
., Check rear view mirror operation
Check self-dimming function/lighting
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating
., Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents for all zones
Under the Hood Inspection
Settings
., Check battery clamps for proper torque
., Set Time source setting to "GPS" and set Auto daylight
savings time to "on."
Re-torque if required
., Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis-> Special functions-> POI service. Select
option 2, the battery test for new batteries as part of the
pre-delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting "ok" when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
., Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Effective 9-26-2016-US
Version 1.9
Change time zone appropriate to the dealer location
., Verify and set language and Measurement Units
This can be changed in the Settings menu by going to Menu>
Vehicle> Vehicle settings
., Verify Speech dialog system is operating
Press the "Talk" button and verify several commands
., Load Onboard Video Tutorials
Load On board Video Tutorials> Turn ignition on> Insert the
On board DVD into the DVD Drive> Select the CAR function
button. System will initialize>Selectthe Owner's Man. function by selecting the upper right control button> Select
"Yes"> Select "CD/DVD"> Select "Start update"> Turn off
ignition to start update (the update will take approx. S minutes)> Once completed, remove the disk and place back into
the case for the next vehicle
., Set "Music volume while parking" to 6 lines
Accessed via MMI rear view camera display, Settings> Music
volume while parking (applies to vehicles with park assist or
rear view camera)
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 24
Audi Service
RB Coupe
Technician Reference Document
Settings (continued)
Driving Performance
., Set dealership location in navigation
., Verify engine performance and acceleration
Set dealership location for following back to dealership
during road test
Media/ Radio/ SAT
., Verify HD Radio is turned "off"
This can be found in the Radio/Settings Menu
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/vibration/pulsation
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Audi connect (USA ONLY)
., Verify Audi connect Information Packet is present
Verify Audi connect Information Packet is present, including
Audi brochure, AT&T brochure, customer SIM card, AT&T
Terms & Conditions (T&C) (if applicable)
Driver Assistance
., Verify operation of parking system (if equipped)
Verify operation of parking system plus with rear view camera (front and rear acoustic sensors)
., Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
., Turn on the wireless network
Ensure the wireless network is turned on (Telephone> Options > Wi-Fi options > Wi-Fi Mode "Hotspot")
., CheckWi-Fi hotspot functionality
Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to "AU DIXXXXX," where XXXXX = the last five digits of VIN that are automatically preset in the system
., Enable Google Earth
Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 2G or 3G symbol
On-Hoist Inspection
., Inspect wheel bolts for proper torque
Use torque wrench to verify
., Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the POI kit
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
Effective 9-26-2016-US
Version 1.9
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 25
Audi Service
TT/TTS Coupe
Technician Reference Document
Vehicle Preparation
Interior
., Deactivate vehicle transport mode
., Check operation of window, lock, and seat controls
This step must be performed with the engine off, ignition
on.
Deactivate vehicle transport mode (via Special functions->
POI service-> 19-Transport mode activating/deactivating)
., Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Control Module list-> SF->
Guided Functions-> SF Adaption). Also referred to as CD
Ripping. Perform 3 button reset of the MMI to complete the
activation. Refer to the owners manual for model specific
button sequence
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
., Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating
., Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
., Set service reminder
via Special functions-> POI service-> 17-PDI-resetting SRI
at POI, counter reset, etc
., Perform any open campaigns
Follow instructions listed in campaign documentation
Settings
., Set Time source setting to "GPS" and set Auto daylight
savings time to "on."
Change time zone appropriate to the dealer location
., Verify and set language and Measurement Units
Under the Hood Inspection
., Check battery clamps for proper torque
Re-torque if required
., Perform a battery test
Perform a battery test and attach the results to the repair
order
This can be changed in the Setup/Settings menu
., Verify speech dialog system is operating
Press the "Talk" button and verify several commands
., Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
., Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with the Advanced Key (if equipped)
Trunk Inspection
., Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit
., Set spare tire pressure
See separate "2017 Normal Load Condition Tire Pressure
Table" posted on ServiceNet
Effective 9-26-2016-US
Version 1.9
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present (if
equipped)
Verify Audi connect Information Packet is present, including
Audi brochure, AT&T brochure, customer SIM card, AT&T
Terms & Conditions (T&C)(if applicable)
., Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
., Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function
button > Settings Ctrl button > Wi-Fi settings > Wi-Fi active >
select "Visible")
., CheckWi-Fi hotspot functionality
Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to "AU DIXXXXX," where XXXXX = the last five digits of VIN that are automatically preset in the system
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 26
Audi Service
TT/TTS Coupe
Technician Reference Document
Audi connect (USA ONLY) (if equipped) (continued)
., Enable Google Earth (if equipped)
Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 3G, or 2G symbol
On-Hoist Inspection
., Inspect wheel bolts for proper torque
Use torque wrench to verify
., Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the POI kit
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
Driving Performance
., Verify engine performance and acceleration
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
., Verify operation of Audi parking system
Verify operation of Audi parking system sensors; Rear
sensors standard, front sensors and rear view camera (if
equipped)
Effective 9-26-2016-US
Version 1.9
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 27
Audi Service
TT Roadster
Technician Reference Document
Vehicle Preparation
Interior
., Deactivate vehicle transport mode
., Check operation of window, lock, and seat controls
This step must be performed with the engine off, ignition
on.
Deactivate vehicle transport mode (via Special functions->
POI service-> 19-Transport mode activating/deactivating)
., Set adaption channel to enable CD Ripping (if equipped
with NAV)
Set adaptation channel (via Control Module list-> SF->
Guided Functions-> SF Adaption). Also referred to as CD
Ripping. Perform 3 button reset of the MMI to complete the
activation. Refer to the owners manual for model specific
button sequence
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
., Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
., Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped)
., Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
., Set service reminder
via Special functions-> POI service-> 17-PDI-resetting SRI
at POI, counter reset, etc
., Perform any open campaigns
Follow instructions listed in campaign documentation
Settings
., Set Time source setting to "GPS" and set Auto daylight
savings time to "on."
Change time zone appropriate to the dealer location
., Verify and set language and Measurement Units
Under the Hood Inspection
., Check battery clamps for proper torque
Re-torque if required
., Perform a battery test
Perform a battery test and attach the results to the repair
order
., Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Exterior
., Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Trunk Inspection
., Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from POI kit and wheel
lock key (if applicable) into trunk tool kit
This can be changed in the Setup/Settings menu
., Verify speech dialog system is operating
Press the "Talk" button and verify several commands
., Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
Audi connect (USA ONLY) (if equipped)
., Verify Audi connect Information Packet is present (if
equipped)
Verify Audi connect Information Packet is present, including
Audi brochure, AT&T brochure, customer SIM card, AT&T
Terms & Conditions (T&C)(if applicable)
., Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
., Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function
button > Settings Ctrl button > Wi-Fi settings > Wi-Fi active >
select "Visible")
., Set spare tire pressure
See separate "2017 Normal Load Condition Tire Pressure
Table" posted on ServiceNet
Effective 9-26-2016-US
Version 1.9
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 28
Audi Service
TT Roadster
Technician Reference Document
Audi connect (USA ONLY) (if equipped) (continued)
., CheckWi-Fi hotspot functionality
Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to "AU DIXXXXX," where XXXXX = the last five digits of VIN that are automatically preset in the system
., Enable Google Earth (if equipped)
Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the-3G, or 2G symbol
On-Hoist Inspection
., Inspect wheel bolts for proper torque
Use torque wrench to verify
., Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the POI kit
., Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known "sold" unit, set to appropriate Normal Load Condition. See separate "2017 Normal Load Condition Tire Pressure Table" posted on Service Net. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
doorjamb, and store tire pressure values in Car/System menu
Driving Performance
., Verify engine performance and acceleration
Listen for abnormal noise/vibrations
., Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
., Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driving Assistance
., Verify operation of parking system
Verify operation of Audi parking system sensors; Rear
sensors standard, front sensors and rear view camera (if
equipped)
Convertible Functionality (if equipped)
., Test operation of power folding top
Perform with engine running to conserve battery power
Effective 9-26-2016-US
Version 1.9
Model Year 2017
I Audi
Pre-Delivery Reference Document
I 29