122-X7H3D-06

Service Bulletin Details

Public Details for: 122-X7H3D-06

Concerns: tailpipe covers information: this is to inform you of a voluntary workshop campaign on the above-mentioned vehicles. There is a possibility that the fastening screw on the tailpipe covers on the affected vehicles was not tighten


- 2014 -

Models from 2014
2014 PORSCHE 911
Service
Technical Information
68/13 ENU
WD49
2
WD49 - Tightening Fastening Screw on Tailpipe Covers (Stop Sale Campaign/Workshop
Campaign)
Vehicle Type:
911 Turbo (991)/911 Turbo S (991)
Model Year:
2014
Concerns:
Tailpipe covers
Information:
This is to inform you of a voluntary Workshop Campaign on the above-mentioned vehicles. There is
a possibility that the fastening screw on the tailpipe covers on the affected vehicles was not
tightened to the specified tightening torque.
Action
Required:
Tighten fastening screw on the tailpipe covers to the prescribed tightening torque.
Affected
Vehicles:
The VIN(s) can be checked by using PIWIS Vehicle Information link to verify if the campaign affects the
vehicle. This campaign is scope specific to the VIN! Failure to verify in PIWIS may result in an improper
repair. This vehicle affects 48 dealers in the United States. ALL VEHICLES ARE STILL EITHER IN
GERMANY OR ENROUTE TO U.S. PORTS. ALL REPAIRS WILL BE COMPLETED AT THE PORTS
PRIOR TO DELIVERY TO DEALERSHIPS.
Tools:
Nr.90 Pos.3 - Torque wrench 10-60 Nm (7.5-44 ftlb.)
CAUTION
Hot components
•
Risk of burns

Let hot components cool down.

Wear personal protective gear.
Work
Procedure:
See Attachment “A”.
Claim
Submission:
See Attachment “B”.
Attachment "A": Work Procedure
1
Raise the vehicle on a lifting platform  Workshop Manual '4X00IN Lifting the vehicle'.
2013© Porsche Cars North America, Inc.
AfterSales
Oct 3, 2013
Page 1 of 3
2
Service
WD49
ENU
2
Technical Information
68/13
Tighten fastening screw on the tailpipe cover on the left in direction of travel.
2.1
Align the tailpipe cover with the rear apron if necessary.
To do this, first loosen the fastening screw on the tailpipe cover slightly if necessary and align
the tailpipe cover.
Information
The fastening screw on the tailpipe covers must be tightened slowly by hand using a
suitable torque wrench.
An electric or pneumatic screwdriver must never be used!
2.2
Tighten fastening screw  Tightening
fastening screw -2- on the tailpipe cover 
Tightening fastening screw -1- on the main
muffler on the left in direction of travel.
Tightening torque 30 Nm (22 ftlb.)
3
Tighten fastening screw on the tailpipe cover on the
right in direction of travel.
To do this, carry out Steps 2.1 and 2.2 on the right
tailpipe cover.
4
Lower the vehicle and remove it from the lifting
platform  Workshop Manual '4X00IN Lifting the vehicle'.
Tightening fastening screw
Attachment "B": Claim Submission - Workshop Campaign WD49
Warranty claims should be submitted via WWS/PQIS.
Open campaigns may be checked by using either the PIWIS Vehicle Information system or through PQIS
Job Creation.
Labor, parts, and sublet will be automatically inserted when Technician is selected in WWS/PQIS. If
necessary, the required part numbers will need to be manually entered into warranty system by the dealer
administrator.
Working time:
Tightening fastening screws on both tailpipe covers
Includes:
Aligning tailpipe covers with the rear apron
Lifting and lowering the vehicle
Labor time: 48 TU
 Damage code WD49 066 000 1
References:
Oct 3, 2013
Page 2 of 3
 Workshop Manual '4X00IN Lifting the vehicle'
AfterSales
2013© Porsche Cars North America, Inc.
Service
Technical Information
68/13 ENU
WD49
2
 Workshop Manual '263519 Removing and installing tailpipe cover'
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. If a particular condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your authorized Porsche Dealer for the latest information
about whether a particular technical bulletin applies to your vehicle. Part numbers listed in these bulletins are for reference only. Always check with your authorized Porsche dealer to verify the current and
correct part numbers. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS
Tester are the ones that must be followed.
© Porsche Cars North America, Inc.
Dealership
Distribution
Routing
Service Manager
_______
Shop Foreman
_______
Service Technician
________
_______
_______
_______
Asst. Manager
_______
Warranty Admin.
_______
Service Technician
________
_______
_______
_______
Dr. Ing. h.c. F. Porsche AG is the owner of numerous trademarks, both registered and unregistered, including without limitation the Porsche Crest®, Porsche®, Boxster®, Carrera®, Cayenne®,
Cayman®, Panamera®, Speedster®, Spyder®, 918 Spyder®, Tiptronic®, VarioCam®, PCM®, PDK®, 911®, 4S®, FOUR, UNCOMPROMISED.® and the model numbers and the distinctive shapes of
the Porsche automobiles such as, the federally registered 911 and Boxster automobiles. The third party trademarks contained herein are the properties of their respective owners. Porsche Cars North
America, Inc. believes the specifications to be correct at the time of printing. Specifications, performance standards, standard equipment, options, and other elements shown are subject to change without
notice. Some options may be unavailable when a car is built. Some vehicles may be shown with non-U.S. equipment. The information contained herein is for internal use only by authorized Porsche dealers
and authorized users and cannot be copied or distributed. Porsche recommends seat belt usage and observance of traffic laws at all times.
Printed in the USA
2013© Porsche Cars North America, Inc.
AfterSales
Oct 3, 2013
Page 3 of 3


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.