S-SB-0025-14

S-SB-0025-14
October 16, 2014
ATM Manual Shift Lever / Park Neutral Position Switch
Installation
Service
Category
Drivetrain
Section
Automatic Transmission/Transaxle
Market
USA
Applicability
YEAR(S)
MODEL(S)
ADDITIONAL INFORMATION
2013 – 2015
FR-S
Body Type(s): Coupe
Drive Type(s): 2WD
Engine(s): FA2
Transmission(s): 6AT
VDS(s): ZNAA1
Introduction
The purpose of this service bulletin is to provide information regarding transmission and/or Park
Neutral position switch installation. If the manual shift lever is rotated prior to installing the Park
Neutral position switch, the detent spring may become detached from the manual shift lever. Use the
information in this bulletin when installing an automatic transmission and/or Park Neutral position
switch assembly.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
–
–
–
–
© 2014 Toyota Motor Sales, USA
Page 1 of 2
S-SB-0025-14
October 16, 2014
Page 2 of 2
ATM Manual Shift Lever / Park Neutral Position Switch Installation
Installation Tips
• When performing automatic transmission/Park Neutral position switch service, take care that the
manual shift lever is NOT rotated prior to installing the Park Neutral position switch.
• If the manual shift lever is rotated without the Park Neutral position switch installed, the detent
spring may become detached from the manual shift lever. See Figures 1 and 2 below.
Figure 1. Detent Spring Detached from Manual Shift
Lever (Transmission Oil Pan Removed for Clarity)
Figure 2. Detent Spring in Place on Manual Shift Lever
(Transmission Oil Pan Removed for Clarity)
• If the detent spring becomes detached from the manual shift lever, remove the detent spring
and reinstall on the manual shift lever. See Figures 1 and 2.
NOTICE
Do NOT attempt to force the manual shift lever into position with the detent spring installed.
This may damage the detent spring. The detent spring must be removed when repositioning
the manual shift lever.
Basic Procedure:
1. Remove transmission oil pan.
2. Remove detent spring.
3. Reposition and install detent spring on manual shift lever.
4. Reinstall transmission oil pan.
5. Install Park Neutral position switch.
6. Confirm proper operation.
© 2014 Toyota Motor Sales, USA