S-SB-0019-14

August 7, 2014
S-SB-0019-14
Front Wheel Opening Extension Pad Installation During
PDS
Service
Category
General
Section
Pre-Delivery Service
Market
USA
Applicability
YEAR(S)
MODEL(S)
2015
iQ
ADDITIONAL INFORMATION
Introduction
The front wheel opening extension pad set (right and left front wheel opening extension pads,
4 screw clips) is loaded in the luggage compartment at the assembly plant to avoid damage in transit.
Install the front wheel opening extension pads to the vehicle during Pre-Delivery Service (PDS).
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
–
–
–
–
Installation Procedure
1. Remove the 2 tapping screws from the engine
under cover, and remove the 2 screw clips from
the front bumper and the fender liner.
Figure 1..
HINT
• Do NOT dispose of the screws, they will
be reused.
• The clips can be disposed of, they will not
be reused.
© 2014 Toyota Motor Sales, USA
Page 1 of 2
S-SB-0019-14
August 7, 2014
Front Wheel Opening Extension Pad Installation During PDS
Installation Procedure (Continued)
2. Install the new screw clips to the front bumper
cover and the fender liner.
Figure 2..
HINT
Be sure to install the extension pads using the
NEW clips supplied.
3. Align the front wheel opening extension pad
holes with the screw clips and secure it with
2 tapping screws.
Figure 3..
HINT
There is a distinguishable mark on each pad.
4. Repeat steps 1 – 3 to install the other front wheel opening extension pad.
© 2014 Toyota Motor Sales, USA
Page 2 of 2